Microstructure and Scratch Resistance of TaC Dense Ceramic Layer on an Iron Matrix

[1]  Yunhua Xu,et al.  Fabrication, microstructure and abrasive wear characteristics of an in situ tantalum carbide ceramic gradient composite , 2015 .

[2]  Fu-hui Wang,et al.  Effects of Si content on microstructure and mechanical properties of TiAlN/Si3N4-Cu nanocomposite coatings , 2014 .

[3]  E. Juarez-Arellano,et al.  Synthesis of TaC and Ta$$_2$$2C from tantalum and graphite in the laser-heated diamond anvil cell , 2014 .

[4]  X. Xiong,et al.  The effect of deposition temperature on the microstructure and mechanical properties of TaC coatings , 2014 .

[5]  Kilian Wasmer,et al.  Sequence of deformation and cracking behaviours of Gallium–Arsenide during nano-scratching , 2013 .

[6]  Chuanzhen Huang,et al.  A study on in situ growth of TaC whiskers in Al2O3 matrix powder for ceramic cutting tools , 2012 .

[7]  Á. Barna,et al.  Thin TaC layer produced by ion mixing , 2012 .

[8]  Wangping Wu,et al.  A novel Ir-Zr gradient coating prepared on Mo substrate by double glow plasma , 2012 .

[9]  M. Ürgen,et al.  Tantalum carbide films synthesized by hot-filament chemical vapor deposition technique , 2012 .

[10]  E. Sani,et al.  Hafnium and tantalum carbides for high temperature solar receivers , 2011 .

[11]  D. Sciti,et al.  Microstructure and properties of HfC and TaC-based ceramics obtained by ultrafine powder , 2011 .

[12]  F. Yıldız,et al.  Multi-pass scratch test behavior of modified layer formed during plasma nitriding , 2010 .

[13]  Shou-Yi Chang,et al.  Mechanical properties, deformation behaviors and interface adhesion of (AlCrTaTiZr)Nx multi-component coatings , 2010 .

[14]  S. Hong,et al.  Effect of binder compositions on microstructure, hardness and magnetic properties of (Ta,Nb)C–Co and (Ta,Nb)C–Ni cemented carbides , 2009 .

[15]  Lim Chi-kyun,et al.  A Study on , 2009 .

[16]  F. Zheng,et al.  Surface morphology and preferential orientation growth of TaC crystals formed by chemical vapor deposition , 2009 .

[17]  G. Hilmas,et al.  Densification and mechanical properties of TaC-based ceramics , 2009 .

[18]  E. Liang,et al.  Microstructure and wear resistance of TaC reinforced Ni-based coating by laser cladding , 2008 .

[19]  Chen Zhao-ke.  Microstructures and mechanical properties of novel C/C-TaC composite , 2008 .

[20]  M. Jenko,et al.  Estimation of fracture toughness of nitride compound layers on tool steel by application of the Vickers indentation method , 2006 .

[21]  G. Janssen,et al.  Scratch resistance of CrN coatings on nitrided steel , 2006 .

[22]  Seong‐Hyeon Hong,et al.  Synthesis of ultrafine TaC–5 wt.% Co composite powders by the spray-carbothermal process , 2005 .

[23]  J. Desmaison,et al.  Comparison of the oxidation behaviour of two dense hot isostatically pressed tantalum carbide (TaC and Ta2C) Materials , 1997 .

[24]  T. Ishida.  The interaction of molten copper with solid iron , 1986 .

[25]  F. Egorov,et al.  Structure and some properties of sintered tantalum carbide , 1982 .

[26]  C. Smith,et al.  Elastic Constants of Tantalum Monocarbide, TaC0.90 , 1967 .