A Modified Marchand Balun Configuration With Tunable Phase Balance

In this letter, a novel modified Marchand balun configuration with tunable phase balance is analyzed and verified experimentally. It is proposed to add a shunt susceptance in between the two couplers of the Marchand balun. This allows for a change in the phase balance which, to first order, is linear with the susceptance, while the magnitude balance is kept constant. To verify the proposed configuration, a lumped element Marchand balun has been fabricated using a SiGe BiCMOS technology. The balun design is centered around 9.4 GHz, with an insertion loss of 6.0 dB. The phase difference between the output ports can be changed from 175.8° to 183 ° whereas the magnitude imbalance is kept almost constant at 0.3 dB. The balun performs well in the range from 7 to 11 GHz, where it is possible to tune the phase to exactly 180°.

[1]  Yu-Chih Hsiao,et al.  A New Broadband Marchand Balun Using Slot-Coupled Microstrip Lines , 2010, IEEE Microwave and Wireless Components Letters.

[2]  Meng-Ju Chiang,et al.  A compact CMOS Marchand balun incorporating meandered multilayer edge-coupled transmission lines , 2009, 2009 IEEE MTT-S International Microwave Symposium Digest.

[3]  Chi-Yang Chang,et al.  Exact Synthesis and Implementation of New High-Order Wideband Marchand Baluns , 2011, IEEE Transactions on Microwave Theory and Techniques.

[4]  Kuo-Sheng Chin,et al.  A Miniaturized Microstrip Balun Constructed With Two $\lambda/8$ Coupled Lines and a Redundant Line , 2010, IEEE Microwave and Wireless Components Letters.

[5]  Anh-Vu Pham,et al.  A Novel Broadband Even-Mode Matching Network for Marchand Baluns , 2009, IEEE Transactions on Microwave Theory and Techniques.

[6]  Keiji Yoshida,et al.  60GHz-band on-chip Marchand Balun designed on flat and patterned ground shields for milimeter-wave 0.18µm CMOS technology , 2011, Asia-Pacific Microwave Conference 2011.

[7]  Runbo Ma,et al.  Design of Compact Frequency-Tuned Microstrip Balun , 2010, IEEE Antennas and Wireless Propagation Letters.

[8]  Ian D. Robertson,et al.  40 to 90 GHz impedance-transforming CPW Marchand balun , 2000, 2000 IEEE MTT-S International Microwave Symposium Digest (Cat. No.00CH37017).

[9]  V. Krozer,et al.  Analysis and design of lumped element Marchand baluns , 2008, MIKON 2008 - 17th International Conference on Microwaves, Radar and Wireless Communications.

[10]  Fujiang Lin,et al.  Novel active differential phase splitters in RFIC for wireless applications , 1998, RFIC 1998.