Life cycle assessment of wood-based heating in Norway

Background, aim, and scopeIn this study, we evaluate the environmental effects of wood-based household heating. Wood is a significant source of household heating in Norway, and a comparative life cycle assessment of a wood-based heating system using an old and a modern stove was conducted to estimate the total life cycle benefits associated with the change from old to new combustion technology.Materials and methodsThe study uses a new approach to complete the inventory. Input–output data are used in combination with the Leontief price model to estimate inputs of products and services from the background economy to the birch wood supply chain.ResultsWhen comparing new and old stove technology, the results show that the new technology contributes to a significantly improved performance (28–80%) for all types of environmental impact studied. As there is a large share of old wood stoves still in use, replacing the old stoves with new ones can lead to substantial reductions in environmental impacts, especially impacts affecting human health. The use phase, i.e., wood combustion, is responsible for over 60% of the impact within all categories. Both the old and new stove provide heating with emissions of greenhouse gases ranging from one third (new stove, ∼80 g CO2-eq/kWh) to half (old stove, ∼110 g CO2-eq/kWh) of the impacts compared to electricity use from the Nordic electricity mix (∼210 g CO2-eq/kWh) to heat the house.DiscussionCombustion of the wood is found to be most important for all types of impacts, even for global warming, where the CO2 emissions from combustion are treated as “climate neutral.” Products of incomplete combustion are the reason for this, as well as the high contribution to other impact categories. Emission factors for these substances are subject to high uncertainty. Although the combustion phase is the most important stage in the life cycle, transportation distances can play an important role. To render wood as environmentally benign as possible, one should thus seek to shorten the distances from producer to consumer.ConclusionsThere is a significant difference in the life cycle performance of a wood stove using modern technology versus older technologies within all impact categories. In addition, there is a preference to use locally produced firewood over wood transported over long distances.Recommendations and perspectivesA strong emphasis on phasing out old woodstoves should be maintained and is well justified.

[1]  Judith C. Chow,et al.  Fine Particle and Gaseous Emission Rates from Residential Wood Combustion , 2000 .

[2]  W. Leontief Quantitative Input and Output Relations in the Economic Systems of the United States , 1936 .

[3]  Sangwon Suh,et al.  Functions, commodities and environmental impacts in an ecological–economic model , 2004 .

[4]  C. Bullard,et al.  The energy cost of goods and services , 1975 .

[5]  Gjalt Huppes,et al.  Methods for Life Cycle Inventory of a product , 2005 .

[6]  R. Boos,et al.  In-field measurements of PCDD/F emissions from domestic heating appliances for solid fuels. , 2005, Chemosphere.

[7]  Robert A. Herendeen,et al.  A comparative analysis of net energy from woody biomass , 1987 .

[8]  J. Seppälä,et al.  Forest industry and the environment: a life cycle assessment study from Finland , 1998 .

[9]  G. Forsberg Biomass energy transport: Analysis of bioenergy transport chains using life cycle inventory method , 2000 .

[10]  Edgar G. Hertwich,et al.  A comment on "Functions, commodities and environmental impacts in an ecological-economic model" , 2006 .

[11]  Olje og energidepartementet St.meld. nr. 29 (1998-99) , 1999 .

[12]  Christoffer Boman,et al.  Emissions from small-scale combustion of biomass fuels : extensive quantification and characterization , 2005 .

[13]  Gjalt Huppes,et al.  System boundary selection in life-cycle inventories using hybrid approaches. , 2004, Environmental science & technology.

[14]  Edgar G. Hertwich,et al.  An update of the Human Toxicity Potential with special consideration of conventional air pollutants , 2006 .

[15]  Edgar G. Hertwich,et al.  Structural analysis of international trade: Environmental impacts of Norway , 2006 .

[16]  Christian Solli,et al.  Applying Leontief's Price Model to Estimate Missing Elements in Hybrid Life Cycle Inventories , 2008 .

[17]  Bodil Merethe Larsen,et al.  Formålsfordeling av husholdningenes elektrisitetsforbruk i 1990 og 2001 , 2005 .

[18]  Stellan Marklund,et al.  Emission of PCDD/F, PCB, and HCB from combustion of firewood and pellets in residential stoves and boilers. , 2006, Environmental Science and Technology.

[19]  Mark A. J. Huijbregts,et al.  Choices in calculating life cycle emissions of carbon containing gases associated with forest derived biofuels , 2003 .

[20]  Jacques De Ruyck,et al.  Dioxin levels in wood combustion - a review. , 2004 .

[21]  I. Obernberger,et al.  Chemical properties of solid biofuels¿significance and impact , 2006 .

[22]  Staffan Berg,et al.  Energy use and environmental impacts of forest operations in Sweden , 2005 .

[23]  B. Solberg,et al.  Environmental and economic impacts of substitution between wood products and alternative materials: a review of micro-level analyses from Norway and Sweden , 2005 .

[24]  T E McKone,et al.  Human toxicity potentials for life‐cycle assessment and toxics release inventory risk screening , 2001, Environmental toxicology and chemistry.

[25]  Sangwon Suh,et al.  Reply: Downstream cut-offs in integrated hybrid life-cycle assessment , 2006 .

[26]  Birger Solberg,et al.  Greenhouse Gas Emissions and Costs over the Life Cycle of Wood and Alternative Flooring Materials , 2004 .

[27]  G. Treloar Extracting Embodied Energy Paths from Input–Output Tables: Towards an Input–Output-based Hybrid Energy Analysis Method , 1997 .

[28]  Christer Johansson,et al.  Chemical and physical characterization of emissions from birch wood combustion in a wood stove , 2002 .

[29]  Roberto Dones,et al.  Life Cycle Inventories of Energy Systems: Results for Current Systems in Switzerland and other UCTE Countries , 2007 .

[30]  Ottar Michelsen,et al.  Environmental Impact and Added Value in Forestry Operations in Norway , 2008 .

[31]  D Athanassiadis,et al.  Energy consumption and exhaust emissions in mechanized timber harvesting operations in Sweden. , 2000, The Science of the total environment.

[32]  Jeroen B. Guinee,et al.  Handbook on life cycle assessment operational guide to the ISO standards , 2002 .

[33]  Manfred Lenzen,et al.  A guide for compiling inventories in hybrid life-cycle assessments: some Australian results , 2002 .

[34]  L. Reijnders Conditions for the sustainability of biomass based fuel use , 2006 .

[35]  Norway. Statistisk sentralbyrå Statistical yearbook of Norway , 1996 .

[36]  B. Leckner,et al.  Emission characteristics of modern and old-type residential boilers fired with wood logs and wood pellets , 2004 .