Mechanical models of fault propagation folds and comparison to the trishear kinematic model

Abstract Faults propagating through the Earth generate a wave of deformation ahead of their tip lines. We have modeled this process to understand the relationship between fold geometry and fault propagation. Using finite element modeling (FEM), we investigate the response of incompressible frictionless and frictional materials, and a compressible frictional material with associated flow, to vertical and dipping faults whose tip lines propagate at rates 3–3.5 times their slip rates. The fold geometries, finite strain, and velocity fields in models with incompressible materials are very similar to those produced by the trishear kinematic model, even though the latter uses a purely ad hoc linear velocity field. Furthermore, when the trishear grid search is applied to the final geometry of the mechanical folds, the best fit kinematic models have approximately the same propagation-to-slip ratio as was used in the FEM experiments. However, when the compressible frictional material is used, the mechanical models exhibit a main triangular shear band in front of the tip line and a conjugate shear band in the fold backlimb, both migrating with the propagating tip line. The conjugate shear band, antithetic to the fault, produces a gentle anticlinal back limb, even though there is not a bend in the fault.

[1]  S. Hardy,et al.  Numerical modeling of trishear fault propagation folding , 1997 .

[2]  G. Mandl.  Mechanics of Tectonic Faulting: Models and Basic Concepts , 1988 .

[3]  D. Pollard,et al.  Microstructure of deformation bands in porous sandstones at Arches National Park, Utah , 1994 .

[4]  Richard W. Allmendinger,et al.  Inverse and forward numerical modeling of trishear fault‐propagation folds , 1998 .

[5]  L. Strayer,et al.  Numerical modeling of fold initiation at thrust ramps , 1997 .

[6]  Arvid M. Johnson,et al.  Folding of viscous layers : mechanical analysis and interpretation of structures in deformed rock , 1994 .

[7]  Jean Braun,et al.  Dynamical Lagrangian Remeshing (DLR): A new algorithm for solving large strain deformation problems and its application to fault-propagation folding , 1994 .

[8]  D. Stearns,et al.  Mechanisms of Drape Folding in the Wyoming Province , 1971 .

[9]  J. Shaw,et al.  Estimation of fault propagation distance from fold shape: Implications for earthquake hazard assessment , 2000 .

[10]  J. Suppe,et al.  Geometry and kinematics of fault-propagation folding , 1990 .

[11]  Kevin J. Smart,et al.  Deformation behavior during blind thrust translation as a function of fault strength , 1999 .

[12]  Robert S. Yeats,et al.  The Oak Ridge fault system and the 1994 Northridge earthquake , 1995, Nature.

[13]  Donald L. Turcotte,et al.  Geodynamics : applications of continuum physics to geological problems , 1982 .

[14]  Arvid M. Johnson,et al.  Mechanical models of trishear-like folds , 2002 .

[15]  R. R. Berg.  Mountain Flank Thrusting in Rocky Mountain Foreland, Wyoming and Colorado , 1962 .

[16]  D. E. Smylie,et al.  The displacement fields of inclined faults , 1971, Bulletin of the Seismological Society of America.

[17]  Chandrakant S. Desai,et al.  Constitutive laws for engineering materials, with emphasis on geologic materials , 1984 .

[18]  F. Niño,et al.  The role of bed-parallel slip in the formation of blind thrust faults , 1998 .

[19]  W. Jamison,et al.  Viscous-plastic finite-element models of fault-bend folds , 1995 .

[20]  J. Baumgardner,et al.  Fault friction, regional stress, and crust‐mantle coupling in southern California from finite element models , 1984 .

[21]  D. Pollard,et al.  8 – THEORETICAL DISPLACEMENTS AND STRESSES NEAR FRACTURES IN ROCK: WITH APPLICATIONS TO FAULTS, JOINTS, VEINS, DIKES, AND SOLUTION SURFACES , 1987 .

[22]  A. Sanford,et al.  ANALYTICAL AND EXPERIMENTAL STUDY OF SIMPLE GEOLOGIC STRUCTURES , 1959 .

[23]  J. Prucha,et al.  Basement-Controlled Deformation in Wyoming Province of Rocky Mountains Foreland , 1965 .

[24]  R. Carmichael.  Practical Handbook of Physical Properties of Rocks and Minerals , 1989 .

[25]  J. Rundle,et al.  The growth of geological structures by repeated earthquakes, 1, conceptual framework , 1988 .

[26]  J. C. Jaeger,et al.  Fundamentals of rock mechanics , 1969 .

[27]  A. Mendelson.  Plasticity: Theory and Application , 1968 .

[28]  G. Ranalli.  Rheology of the Earth : Deformation and Flow Processes in Geophysics and Geodynamics , 1987 .

[29]  K. McClay.  Thrust and Nappe Tectonics , 1981 .

[30]  J. Suppe.  Principles of structural geology , 1984 .

[31]  D. Elliott.  The motion of thrust sheets , 1976 .

[32]  R. Hill.  The mathematical theory of plasticity , 1950 .

[33]  D. Stearns.  Faulting and forced folding in the Rocky Mountains foreland , 1978 .

[34]  Eric A. Erslev,et al.  Trishear fault-propagation folding , 1991 .

[35]  J. C. Savage,et al.  A dislocation model for the Fairview Peak, Nevada, earthquake , 1969 .

[36]  J. Byerlee,et al.  Experimental studies of compaction and dilatancy during frictional sliding on faults containing gouge , 1989 .

[37]  R. C. Fletcher,et al.  Mathematical block-motion model for deformation of a layer above a buried fault of arbitrary dip and sense of slip , 1995 .

[38]  Alan T. Zehnder,et al.  Velocity field for the trishear model , 2000 .

[39]  B. Atkinson.  Fracture Mechanics of Rock , 1987 .

[40]  R. Gries.  Seismic Exploration of the Rocky Mountain Region , 1985 .

[41]  W. Rizer,et al.  Deformation and secondary faulting near the leading edge of a thrust fault , 1981, Geological Society, London, Special Publications.