Parallel Inverter Circulating Current Suppression Method Based on Adaptive Virtual Impedance

In practice, the output impedance and lead impedance of the parallel inverter are often inconsistent, and the inconsistency of the equivalent impedance also causes uneven power between the inverters. In this thesis, the parallel inverter system circulating current is analyzed, and the output impedance inconsistency problem is improved by adaptive virtual impedance. The virtual impedance is different from the actual output impedance, which can optimize the power sharing problem without introducing additional power loss.

[1]  Josep M. Guerrero,et al.  Design and Analysis of the Droop Control Method for Parallel Inverters Considering the Impact of the Complex Impedance on the Power Sharing , 2011, IEEE Transactions on Industrial Electronics.

[2]  Po-Tai Cheng,et al.  A grid synchronization method for droop controlled distributed energy resources converters , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[3]  Hua Jin,et al.  Control of parallel inverters in distributed AC power systems with consideration of line impedance effect , 2000 .

[4]  K. Mauch,et al.  Control of parallel inverters in distributed AC power systems with consideration of the line impedance effect , 1998, APEC '98 Thirteenth Annual Applied Power Electronics Conference and Exposition.

[5]  Fang Liu,et al.  A Virtual Impedance Comprehensive Control Strategy for the Controllably Inductive Power Filtering System , 2017, IEEE Transactions on Power Electronics.

[6]  Po-Tai Cheng,et al.  A Grid Synchronization Method for Droop-Controlled Distributed Energy Resource Converters , 2013, IEEE Transactions on Industry Applications.

[7]  M Castilla,et al.  Virtual Impedance Loop for Droop-Controlled Single-Phase Parallel Inverters Using a Second-Order General-Integrator Scheme , 2010, IEEE Transactions on Power Electronics.

[8]  Ivo Barbi,et al.  A Control Strategy for Parallel Operation of Single-Phase Voltage Source Inverters: Analysis, Design and Experimental Results , 2013, IEEE Transactions on Industrial Electronics.