Efficient vertical-cavity surface-emitting lasers for infrared illumination applications

Infrared illumination is used in the commercial and defense markets for surveillance and security, for high-speed imaging, and for military covert operations. Vertical-cavity surface-emitting lasers (VCSELs) are an attractive candidate for IR illumination applications as they offer advantageous properties such as efficiency, intrinsically low diverging circular beam, low-cost manufacturing, narrow emission spectrum, and high reliability. VCSELs can also operate at high temperatures, thereby meeting the harsh environmental requirements of many illuminators. The efficiency and brightness of these VCSELs also reduce the requirements of the power supply compared to, for example, an LED approach. We present results on VCSEL arrays for illumination applications, as well as results on VCSEL-based illumination experiments. These VCSELs are used in illuminators emitting from a few Watts up to several hundred Watts. The emission of these VCSEL-based illuminators is speckle-free with no interference patterns. Infra-red illumination at up to 1,600ft (500m) from the source has been demonstrated using VCSEL-based illumination, without any optics.

[1]  L. Arthur D'Asaro,et al.  Progress in high-power high-efficiency VCSEL arrays , 2009, OPTO.

[2]  Brian Thibeault,et al.  Current spreading in apertured vertical-cavity lasers , 1997, Photonics West.

[3]  L. Arthur D'Asaro,et al.  High-power high-efficiency 2D VCSEL arrays , 2008, SPIE OPTO.

[4]  L. Coldren,et al.  High-performance small vertical-cavity lasers: a comparison of measured improvements in optical and current confinement in devices using tapered apertures , 1999 .

[5]  P. Dapkus,et al.  Influence of mirror reflectivity on laser performance of very-low-threshold vertical-cavity surface-emitting lasers , 1995, IEEE Photonics Technology Letters.

[6]  P. Dapkus,et al.  Aperture placement effects in oxide-defined vertical-cavity surface-emitting lasers , 1998, IEEE Photonics Technology Letters.

[7]  A. R. Sugg,et al.  Hydrolyzation oxidation of AlxGa1−xAs‐AlAs‐GaAs quantum well heterostructures and superlattices , 1990 .

[8]  Andrew Clark,et al.  Commercialization of Honeywell's VCSEL technology , 2000, Photonics West - Optoelectronic Materials and Devices.

[9]  A. Moser,et al.  Arrhenius parameters for the rate process leading to catastrophic damage of AlGaAs‐GaAs laser facets , 1992 .

[10]  Don Snyder,et al.  High power VCSELs for miniature optical sensors , 2010, OPTO.

[11]  Kent D. Choquette,et al.  Vertical-cavity surface emitting lasers: moving from research to manufacturing , 1997, Proc. IEEE.

[12]  L. Coldren,et al.  Growth of beryllium doped AlxGa1−xAs/GaAs mirrors for vertical‐cavity surface‐emitting lasers , 1994 .

[13]  S. Bounnak,et al.  200/spl deg/C, 96-nm wavelength range, continuous-wave lasing from unbonded GaAs MOVPE-grown vertical cavity surface-emitting lasers , 1995, IEEE Photonics Technology Letters.

[14]  D. Deppe,et al.  Native-Oxide Defined Ring Contact for Low Threshold Vertical-Cavity Lasers , 1994 .