Model testing of suction caissons in clay subjected to vertical loading

Abstract A wide range of new offshore applications are emerging in the energy sector. The oil and gas industry is targeting minimum facility applications, whilst the renewable energy sector is developing offshore wind turbines, as well as a number of wave and tidal energy devices. The design and installation of the foundations are key considerations in the financial viability of such offshore engineering projects. Suction caisson foundations are a potential solution for these new developments, but design guidance is relatively sparse. This paper considers the vertical loading response of a caisson foundation in clay, during installation and under both monotonic and cyclic vertical loading. The main contribution is the presentation and interpretation of high quality experimental data. Vertical loading is critical for the design of a multi-footing structure of the type that might be used for large offshore wind turbines. We first consider the installation behaviour and compare data from pushed installations and a suction installation with results from a theoretical calculation. We then consider cyclic vertical loading tests, focussing on cyclic amplitudes that take the foundation into tension. Detailed displacement data and pore pressure data are presented.

[1]  Felipe Alberto Villalobos Jara.  Model testing of foundations for offshore wind turbines , 2006 .

[2]  Byron W. Byrne,et al.  Design procedures for installation of suction caissons in clay and other materials , 2005 .

[3]  Steinar Bysveen,et al.  Field tests of anchors in clay. II: Predictions and interpretation , 1993 .

[4]  Guy T. Houlsby,et al.  A comparison of field and laboratory tests of caisson foundations in sand and clay , 2006 .

[5]  G. Houlsby,et al.  Foundations for offshore wind turbines , 2003, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[6]  J. L. Colliat,et al.  Girassol: Geotechnical Design Analyses And Installation Of The Suction Anchors , 2002 .

[7]  Byron W. Byrne,et al.  Investigations of suction caissons in dense sand , 2000 .

[8]  Hans Petter Jostad,et al.  Foundation design of skirted foundations and anchors in clay , 1999 .

[9]  Mark Randolph,et al.  A comparison of the combined load behaviour of spudcan and caisson foundations on soft normally consolidated clay , 2004 .

[10]  Chris Martin.  Physical and numerical modelling of offshore foundations under combined loads , 1994 .

[11]  Hans Petter Jostad,et al.  Shear Strength Along Outside Wall of Suction Anchors In Clay After Installation , 2002 .

[12]  E. C. Clukey,et al.  The response of suction caissons in normally consolidated clays to cyclic TLP loading conditions , 1995 .

[13]  Mark Randolph,et al.  Suction anchors for deepwater applications , 2005 .

[14]  Guy T. Houlsby,et al.  Field trials of suction caissons in clay for offshore wind turbine foundations , 2005 .

[15]  Mark Randolph,et al.  Radial stress changes around caissons installed in clay by jacking and by suction , 2004 .

[16]  Guido Gottardi,et al.  Standardized sign conventions and notation for generally loaded foundations , 1997 .

[17]  Paulo Eduardo Lima de Santa Maria.  Behaviour of footings for offshore structures under combined loads , 1988 .

[18]  Mark Cassidy,et al.  Investigating the response of offshore foundations in soft clay soils , 2002 .

[19]  C. M. Martín,et al.  Vertical bearing capacity of skirted foundation circular foundations on Tresca soil , 2001 .

[20]  A. W. Skemption,et al.  The Sensitivity of Clays , 1952 .

[21]  Guy T. Houlsby,et al.  Transient vertical loading of model suction caissons in a pressure chamber , 2006 .

[22]  Roy E. Olson,et al.  The Pullout Capacity of Suction Caisson Foundations For Tension Leg Platforms , 1998 .

[23]  Roy E. Olson,et al.  Measured Response During Laboratory Installation of Suction Caissons , 2003 .