论文信息 - DSP BASED POWER ANALYZING SYSTEM FOR ONSITE MEASUREMENTS

DSP BASED POWER ANALYZING SYSTEM FOR ONSITE MEASUREMENTS

A three-phase power analyzing system based on digital signal processing (DSP) has been developed as a traveling standard for onsite power calibration. The design and operation is described for a sampling wattmeter capable of measuring power parameters of sinusoidal signal with frequencies of 50 to 60 Hz and measuring harmonics of nonsinusoidal signals up to 3 kHz. The system is utilized with digital-to-analog converts synchronized with each other. Software has been developed to calculate power parameters using the digital signal processing technique. The calibration system is traceable to national standard systems with an accuracy of 0.05% and allows the calibration of industrial power measurement systems.

Young Tae Park | W.M.S. Wijesinghe

[1] Umberto Pogliano. Use of integrative analog-to-digital converters for high-precision measurement of electrical power , 2001, IEEE Trans. Instrum. Meas..

[2] G. Ramm,et al. A new scheme for generating and measuring active, reactive and apparent power at power frequencies with uncertainties of 5 ppm , 1998, 1998 Conference on Precision Electromagnetic Measurements Digest (Cat. No.98CH36254).

[3] Endre Toth,et al. Power and energy reference system, applying dual-channel sampling , 2005, IEEE Transactions on Instrumentation and Measurement.

[4] U. Pogliano,et al. Precision measurement of AC voltage below 20 Hz at IEN , 1996 .