Numerical investigation of compressible flow around nose cone with Multi-row disk and multi coolant jets

[1]  Younes Amini,et al.  Numerical study on the thermal performance of the shell and tube heat exchanger using twisted tubes and Al2O3 nanoparticles , 2023, Progress in Nuclear Energy.

[2]  Haiping Zhang,et al.  Numerical Study on Welding Residual Stress Distribution of Corrugated Steel Webs , 2022, Metals.

[3]  Younes Amini,et al.  Configuration Optimization of a renewable hybrid system including Biogas generator, Photovoltaic panel and Wind turbine: Particle swarm optimization and genetic algorithms , 2022, International Journal of Modern Physics C.

[4]  Yang Wang,et al.  Feasibility study of hydrogen jet flame ignition of ammonia fuel in marine low speed engine , 2022, International Journal of Hydrogen Energy.

[5]  Z. Said,et al.  Tribology of enhanced turning using biolubricants: A comparative assessment , 2022, Tribology International.

[6]  Z. Said,et al.  Electrostatic atomization minimum quantity lubrication machining: from mechanism to application , 2022, International Journal of Extreme Manufacturing.

[7]  M. Ghanbari,et al.  Influence of coolant multi-jets on heat reduction of nose cone with blunt spike at hypersonic flow , 2022, Scientific Reports.

[8]  Q. An,et al.  Fiber-reinforced composites in milling and grinding: machining bottlenecks and advanced strategies , 2022, Frontiers of Mechanical Engineering.

[9]  K. Fallah,et al.  Splitting of droplet with different sizes inside a symmetric T-junction microchannel using an electric field , 2022, Scientific reports.

[10]  Guofu Yin,et al.  Multimodal Fusion Convolutional Neural Network with Cross-attention Mechanism for Internal Defect Detection of Magnetic Tile , 2022, IEEE Access.

[11]  Guofu Yin,et al.  Self-feature-based point cloud registration method with a novel convolutional Siamese point net for optical measurement of blade profile , 2022, Mechanical Systems and Signal Processing.

[12]  Dianrong Gao,et al.  DPM-LES investigation on flow field dynamic and acoustic characteristics of a twin-fluid nozzle by multi-field coupling method , 2022, International Journal of Heat and Mass Transfer.

[13]  Long Liu,et al.  A flexible diesel spray model for advanced injection strategy , 2021, Fuel.

[14]  Z. Said,et al.  Grindability of carbon fiber reinforced polymer using CNT biological lubricant , 2021, Scientific Reports.

[15]  Yu Hu,et al.  Hovering efficiency optimization of the ducted propeller with weight penalty taken into account , 2021 .

[16]  K. Fallah,et al.  Numerical study of droplet breakup in an asymmetric T-junction microchannel with different cross-section ratios , 2021, International Journal of Modern Physics C.

[17]  Yu Jiang,et al.  Influence of trapezoidal lobe strut on fuel mixing and combustion in supersonic combustion chamber , 2021, 2105.10780.

[18]  S. Hosseini,et al.  Effect of hybrid coaxial air and hydrogen jets on fuel mixing at supersonic crossflow , 2021 .

[19]  S. Hosseini,et al.  Mixing efficiency of hydrogen multijet through backward-facing steps at supersonic flow , 2021 .

[20]  A. M. Khoshnood,et al.  Multi-physics simulation of an insect with flapping wings , 2020 .

[21]  A. Abazari,et al.  Injection of hydrogen sonic multi-jet on inclined surface at supersonic flow , 2020, International Journal of Modern Physics C.

[22]  R. Moradi,et al.  Effect of strut angle on performance of hydrogen multi-jets inside the cavity at combustion chamber , 2020 .

[23]  R. Moradi,et al.  Effect of inclined block on fuel mixing of multi hydrogen jets in scramjet engine , 2020 .

[24]  R. Moradi,et al.  Mixing enhancement of multi hydrogen jets through the cavity flameholder with extended pylon , 2020 .

[25]  R. Moradi,et al.  Effect of free stream angle on mixing performance of hydrogen multi-jets in supersonic combustion chamber , 2020, International Journal of Hydrogen Energy.

[26]  R. Moradi,et al.  Numerical simulation of the hydrogen mixing in downstream of lobe strut at supersonic flow , 2020 .

[27]  R. Moradi,et al.  Computational investigation of multi hydrogen jets at inclined supersonic flow , 2020, International Journal of Energy Research.

[28]  R. Moradi,et al.  Influence of upstream strut on hydrogen fuel distribution inside the supersonic combustion chamber , 2020 .

[29]  Weisheng Zhao,et al.  Reversible Switching of Interlayer Exchange Coupling through Atomically Thin VO2 via Electronic State Modulation , 2020, Matter.

[30]  R. Moradi,et al.  Computational study of the cavity flow over sharp nose cone in supersonic flow , 2020 .

[31]  R. Moradi,et al.  Computational investigation of multi-cavity fuel injection on hydrogen mixing at supersonic combustion chamber , 2020 .

[32]  S. Noori,et al.  Viscous equilibrium analysis of heat transfer on blunted cone at hypersonic flow , 2019, Case Studies in Thermal Engineering.

[33]  Jun Wang,et al.  Predictive model for minimum chip thickness and size effect in single diamond grain grinding of zirconia ceramics under different lubricating conditions , 2019, Ceramics International.

[34]  Weisheng Zhao,et al.  Phase-Change Control of Interlayer Exchange Coupling , 2019, 1907.10784.

[35]  Younes Amini,et al.  Analytical study of heat and mass transfer in axisymmetric unsteady flow by ADM method , 2019 .

[36]  Jinglei Xu,et al.  Numerical evaluation of aerodome and cooling jet for aeroheating reduction , 2019, Aerospace Science and Technology.

[37]  R. Moradi,et al.  The effect of coolant injection from the tip of spike on aerodynamic heating of nose cone at supersonic flow , 2019, Acta Astronautica.

[38]  Liang Zhu,et al.  Novel Combinational Aerodisk and Lateral Jet Concept for Drag and Heat Reduction in Hypersonic Flows , 2019, Journal of Aerospace Engineering.

[39]  Younes Amini,et al.  CFD simulation of the structured packings: A review , 2018, Separation Science and Technology.

[40]  R. Moradi,et al.  The influence of coolant jet direction on heat reduction on the nose cone with Aerodome at supersonic flow , 2018, Acta Astronautica.

[41]  Naiqing Zhang,et al.  Experimental assessment of an environmentally friendly grinding process using nanofluid minimum quantity lubrication with cryogenic air , 2018 .

[42]  Pengfei Yang,et al.  Effects of inflow Mach number on oblique detonation initiation with a two-step induction-reaction kinetic model , 2018, Combustion and Flame.

[43]  R. Moradi,et al.  Effect of dual micro fuel jets on mixing performance of hydrogen in cavity flameholder at supersonic flow , 2018 .

[44]  Qihao Qin,et al.  Fluid-thermal analysis of aerodynamic heating over spiked blunt body configurations , 2017 .

[45]  N. Sedaghatizadeh,et al.  Simulation of natural convection heat transfer using nanofluid in a concentric annulus , 2017 .

[46]  M. H. Nasimi,et al.  Investigating the effects of nanoparticles mean diameter on laminar mixed convection of a nanofluid through an inclined tube with circumferentially nonuniform heat flux , 2016 .

[47]  S. Chakraborty,et al.  Numerical modeling of surface reaction kinetics in electrokinetically actuated microfluidic devices. , 2014, Analytica chimica acta.

[48]  D. Ganji,et al.  Influence of Opposing Jet on an Aerodisk Nose Cone at Hypersonic Flow , 2014 .

[49]  M. Gerdroodbary,et al.  Numerical analysis on cooling performance of counterflowing jet over aerodisked blunt body , 2014 .

[50]  M. Barzegar Gerdroodbary.  Numerical analysis on cooling performance of counterflowing jet over aerodisked blunt body , 2014 .

[51]  S. Hosseinalipour,et al.  Transient analysis of counterflowing jet over highly blunt cone in hypersonic flow , 2012 .

[52]  Seyed Mostafa Hosseinalipour,et al.  Numerical simulation of hypersonic flow over highly blunted cones with spike , 2010 .

[53]  Ken Badcock,et al.  Driving Mechanisms of High-Speed Unsteady Spiked Body Flows, Part 2: Oscillation Mode , 2004 .

[54]  F. Menter.  Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .

[55]  Earl A. Thornton,et al.  Flow-thermal-structural study of aerodynamically heated leading edges , 1988 .

[56]  Robert C. Wolpert,et al.  A Review of the , 1985 .