Effects of alternative control strategies of water-evaporative cooling systems on energy efficiency and plume control: A case study

Abstract This paper reports the evaluations of energy efficiency, plume potential as well as plume control of a huge chiller plant using water-evaporative cooling towers for heat rejection for a super high-rising commercial office building in a subtropical region of Hong Kong. The evaluations were carried out in a dynamic Transient Simulation Program (TRNSYS)-based simulation platform using alternative control strategies including set-point control logics of the supply cooling water temperature and cooling tower fan modulation control methods as well as different number control means of cooling towers. The results show that different control strategies have significant effects on the energy efficiency of the chiller plant. The quantification of the energy efficiency demonstrates significant energy-saving potential by using advanced technologies for implementing optimal control strategies in this cooling system. The results also reveal that the plume may occur frequently in spring and summer seasons and occasionally in other months due to the odd subtropical weather conditions. Control strategies also have significant effects on the frequency of the plume occurrence. The effective energy efficiency control and effective plume control using wet–dry (i.e., hybrid) cooling towers are also discussed.

[1]  Joseph C. Lam,et al.  Energy analysis of commercial buildings in subtropical climates , 2000 .

[2]  J. W. Sutherland,et al.  Analysis of Mechanical-Draught Counterflow Air/Water Cooling Towers , 1983 .

[3]  S. P. W. Wong,et al.  System simulation of the performance of a centrifugal chiller using a shell-and-tube-type water-cooled condenser and R-11 as refrigerant , 1989 .

[4]  F. W. Yu,et al.  Part load performance of air-cooled centrifugal chillers with variable speed condenser fan control , 2007 .

[5]  J.P.H. Bourdouxhe,et al.  A toolkit for primary HVAC system energy calculation. Part 2: Reciprocating chiller models , 1994 .

[6]  Shengwei Wang,et al.  Online adaptive control for optimizing variable-speed pumps of indirect water-cooled chilling systems , 2001 .

[7]  H. Crowther,et al.  Optimizing Chillers & Towers , 2004 .

[8]  Joseph C. Lam,et al.  Sensitivity analysis of energy performance of office buildings , 1996 .

[9]  Xiaosong Zhang,et al.  A novel energy-saving method for air-cooled chiller plant by parallel connection , 2006 .

[10]  S. R. Wild,et al.  Environmental management of coastal cooling water discharges in Hong Kong , 1998 .

[11]  Sai On Cheung,et al.  An analysis of electricity end-use in air-conditioned office buildings in Hong Kong , 2003 .

[12]  F. W. Yu,et al.  Applying condensing-temperature control in air-cooled reciprocating water chillers for energy efficiency , 2002 .

[13]  S. C. Kaushik,et al.  Application of solar collectors to control the visible plume from wet cooling towers of a commercial building in Hong Kong : a case study , 2007 .

[14]  A R Winter.  Control of visible plumes from cooling towers , 1997 .

[15]  Shengwei Wang,et al.  Dynamic simulation of a building central chilling system and evaluation of EMCS on-line control strategies , 1998 .

[16]  D. Baker,et al.  a comprehensive approach to the analysis of cooling tower performance , 1961 .

[17]  F. W. Yu,et al.  Electricity end-use characteristics of air-cooled chillers in hotels in Hong Kong , 2005 .

[18]  Xinhua Xu,et al.  Evaluation of plume potential and plume abatement of evaporative cooling towers in a subtropical region , 2008 .

[19]  Jeffrey M. Gordon,et al.  Centrifugal chillers: Thermodynamic modelling and a diagnostic case study , 1995 .

[20]  P. A. Lindahl,et al.  Plume abatement and water conservation with the wet/dry cooling tower , 1995 .

[21]  W. Rodi,et al.  Three-dimensional computation of flow past cylindrical structures and model cooling towers , 1989 .

[22]  Xiangjiang Zhou,et al.  Optimal operation of a large cooling system based on an empirical model , 2004 .

[23]  Ennio Antonio Carnevale,et al.  Environmental impact from wet plumes in combined-cycle power plants , 1998 .

[24]  John Burnett,et al.  Mechanistic model of centrifugal chillers for HVAC system dynamics simulation , 2000 .

[25]  Michael Bennett,et al.  An analysis of lidar measurements of buoyant plume rise and dispersion at five power stations , 1992 .

[26]  B E A Fisher,et al.  Predicting cooling tower plume dispersion , 1997 .