Silicon carbide resonant tuning fork for microsensing applications in high-temperature and high G-shock environments

We present the fabrication and testing of a silicon carbide balanced mass double-ended tuning fork that survives harsh environments without compromising the device strain sensitivity and resolution bandwidth. The device features a material stack that survives corrosive environments and enables high-temperature operation. To perform high-temperature testing, a specialized setup was constructed that allows the tuning fork to be characterized using traditional silicon electronics. The tuning fork has been operated at 600°C in the presence of dry steam for short durations. This tuning fork has also been tested to 64,000 G using a hard-launch, soft-catch shock implemented with a light gas gun. However, the device still has a strain sensitivity of 66 Hz/µe and strain resolution of 0.045 µe in a 10-kHz bandwidth. As such, this balanced-mass double-ended tuning fork can be used to create a variety of different sensors including strain gauges, accelerometers, gyroscopes, and pressure transducers. Given the adaptable fabrication process flow, this device could be useful to microelectromechanical systems (MEMS) designers creating sensors for a variety of different applications.

[1]  Mehran Mehregany,et al.  A silicon carbide capacitive pressure sensor for in-cylinder pressure measurement , 2008 .

[2]  M. Lofdahl,et al.  Using a MISiC-FET sensor for detecting NH/sub 3/ in SCR systems , 2005, IEEE Sensors Journal.

[3]  R. Howe,et al.  Transformer coupled plasma etching of 3C-SiC films using fluorinated chemistry for microelectromechanical systems applications , 2004 .

[4]  Barry E. Jones,et al.  A pressure transducer using a metallic triple-beam tuning fork , 1997 .

[5]  A. Pisano,et al.  Temperature-insensitive silicon carbide resonant micro-extensometers , 2009, TRANSDUCERS 2009 - 2009 International Solid-State Sensors, Actuators and Microsystems Conference.

[6]  Thomas W. Kenny,et al.  Using the temperature dependence of resonator quality factor as a thermometer , 2007 .

[7]  Liudi Jiang,et al.  Mechanical properties of a 3C-SiC film between room temperature and 600 °C , 2007 .

[8]  M. Ward,et al.  Physical characterisation of selective stress coupling for resonant pressure sensors , 2004 .

[9]  Liang-Yu Chen,et al.  Stable Electrical Operation of 6H–SiC JFETs and ICs for Thousands of Hours at 500 $^{\circ}\hbox{C}$ , 2008, IEEE Electron Device Letters.

[10]  Dongil Kwon,et al.  Evaluation of elastic properties and temperature effects in Si thin films using an electrostatic microresonator , 2003 .

[11]  C. Myers,et al.  Strap-down microelectromechanical (MEMS) sensors for high-g munition applications , 2001 .

[12]  R. Howe,et al.  Single-Source Chemical Vapor Deposition of SiC Films in a Large-Scale Low-Pressure CVD Growth, Chemical, and Mechanical Characterization Reactor , 2006 .

[13]  Robert G. Azevedo,et al.  Dual-mode temperature compensation for a comb-driven MEMS resonant strain gauge , 2008 .

[14]  R.T. Howe,et al.  Redundant MEMS resonators for precise reference oscillators , 2005, 2005 IEEE Radio Frequency integrated Circuits (RFIC) Symposium - Digest of Papers.

[15]  Wan-Thai Hsu,et al.  Stiffness-compensated temperature-insensitive micromechanical resonators , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[16]  Li Chen,et al.  A SiC MEMS Resonant Strain Sensor for Harsh Environment Applications , 2007, IEEE Sensors Journal.

[17]  S. Montague,et al.  An integrated microelectromechanical resonant output gyroscope , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[18]  T. A. Roessig,et al.  Surface-micromachined resonant accelerometer , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[19]  B. Boser,et al.  A MEMS resonant strain sensor operated in air , 2004, 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest.

[20]  M. Mehregany,et al.  Fracture toughness of low-pressure chemical-vapor-deposited polycrystalline silicon carbide thin films , 2006 .

[21]  Mehran Mehregany,et al.  Silicon carbide MEMS for harsh environments , 1998, Proc. IEEE.

[22]  Thomas W. Kenny,et al.  Temperature-compensated high-stability silicon resonators , 2007 .