New low contact resistance triple capping layer enabling very high Gm InAIAs/lnGaAs HEMTs

[1]  April Brown,et al.  50-nm self-aligned-gate pseudomorphic AlInAs/GaInAs high electron mobility transistors , 1992 .

[2]  Hadis Morkoç,et al.  Recent developments in ohmic contacts for III-V compound semiconductors , 1992 .

[3]  P. Smith,et al.  Extremely high gain 0.15 mu m gate-length InAlAs/InGaAs/InP HEMTs , 1991 .

[4]  H. Leblanc,et al.  Evaluation of single ohmic metallisations for contacting both p- and n-type GaInAs , 1990 .

[5]  P.M. Smith,et al.  W-band low-noise InAlAs/InGaAs lattice-matched HEMTs , 1990, IEEE Electron Device Letters.

[6]  Yuji Ando,et al.  Accurate modeling for parasitic source resistance in two-dimensional electron gas field-effect transistors , 1989 .

[7]  F. Ren,et al.  Thermal stability of tungsten ohmic contacts to the graded‐gap InGaAs/GaAs/AlGaAs heterostructure , 1989 .

[8]  T. Mimura,et al.  HEMT with nonalloyed ohmic contacts using n+-InGaAs cap layer , 1987, IEEE Electron Device Letters.

[9]  L. Eastman,et al.  Very low resistance Au/Ge/Ni/Ag based Ohmic contact formation to Al0.25/Ga0.75As/GaAs and Al0.48In0.52As/Ga0.47In0.53As heterostructures: A behavioral comparison , 1986 .

[10]  C. R. Crowell,et al.  Parasitic source and drain resistance in high-electron-mobility transistors , 1985 .

[11]  H. Temkin,et al.  Structural study of alloyed gold metallization contacts on InGaAsP/InP layers , 1982 .

[12]  G. K. Reeves,et al.  Obtaining the specific contact resistance from transmission line model measurements , 1982, IEEE Electron Device Letters.