Additive Manufacturing of Anisotropic Graphene-Based Composites for Thermal Management Applications

[1]  P. Poulin,et al.  G raphene O xide B ased T ransparent R esins F or A ccurate , 2023, Advanced Functional Materials.

[2]  Jooheon Kim,et al.  Enhanced thermal and mechanical properties of 3D-printed PEG containing acrylate composite with surface-treated BN via digital light processing , 2022, Polymer Testing.

[3]  S. Ferguson,et al.  Light‐Based Printing of Leachable Salt Molds for Facile Shaping of Complex Structures , 2022, Advanced materials.

[4]  Yucong Lin,et al.  Enhanced thermal conductivity of epoxy acrylate/ h‐BN and AlN composites by photo‐curing 3D printing technology , 2022, Journal of Applied Polymer Science.

[5]  S. Sushanth Kumar,et al.  High performance, microarchitected, compact heat exchanger enabled by 3D printing , 2022, Applied Thermal Engineering.

[6]  G. Ziskind,et al.  Down the Dimensionality Lane: Thermal Conductivity Enhancement in Carbon-Based Liquid Dispersions. , 2022, ACS applied materials & interfaces.

[7]  W. Harun,et al.  Thermally conductive polymer nanocomposites for filament-based additive manufacturing , 2022, Journal of Materials Science.

[8]  W. Matusik,et al.  3D printing of polymer composites: Materials, processes, and applications , 2022, Matter.

[9]  Pingan Song,et al.  Scalable, Robust, Low‐Cost, and Highly Thermally Conductive Anisotropic Nanocomposite Films for Safe and Efficient Thermal Management , 2021, Advanced Functional Materials.

[10]  Kenan Song,et al.  3D printing for polymer/particle-based processing: A review , 2021 .

[11]  Xiaoxiao Huang,et al.  Highly conductive thermal interface materials with vertically aligned graphite-nanoplatelet filler towards: High power density electronic device cooling , 2021 .

[12]  Jooheon Kim,et al.  The thermal properties of a UV curable acrylate composite prepared by digital light processing 3D printing , 2021 .

[13]  Robert E. Hebner,et al.  Review of Nanocomposite Dielectric Materials With High Thermal Conductivity , 2021, Proceedings of the IEEE.

[14]  Jooheon Kim,et al.  Selectively distributed graphene in 1,6-hexanediol diacrylate/epoxy composites via digital light processing 3D printing for enhanced thermal conductivity , 2021 .

[15]  Licheng Li,et al.  Design of 3D printed bioinspired nacre-like structured materials with significantly enhanced thermal conductivity , 2021 .

[16]  Wenbin Kang,et al.  Current advances and future perspectives of additive manufacturing for functional polymeric materials and devices , 2021, SusMat.

[17]  S. Spriano,et al.  3D Printing of PDMS-Like Polymer Nanocomposites with Enhanced Thermal Conductivity: Boron Nitride Based Photocuring System , 2021, Nanomaterials.

[18]  I. Furó,et al.  Trapped and Alone: Clay-Assisted Aqueous Graphene Dispersions. , 2021, ACS applied materials & interfaces.

[19]  Wenxian Lin,et al.  Experimental study on the heat dissipation performance of straight and oblique fin heat sinks made of thermal conductive composite polymers , 2021 .

[20]  Yuezhan Feng,et al.  Highly thermally conductive polyvinyl alcohol/boron nitride nanocomposites with interconnection oriented boron nitride nanoplatelets , 2021 .

[21]  A. Balandin,et al.  Thermal interface materials with graphene fillers: review of the state of the art and outlook for future applications , 2020, Nanotechnology.

[22]  M. Riskin,et al.  Compression-enhanced thermal conductivity of carbon loaded polymer composites , 2020 .

[23]  G. Ziskind,et al.  Enhancing thermal conductivity in graphene-loaded paint: Effects of phase change, rheology and filler size , 2020 .

[24]  Diego P. Rocha,et al.  Additive-manufactured (3D-printed) electrochemical sensors: A critical review. , 2020, Analytica chimica acta.

[25]  S. Molina,et al.  Influence of the Degree of Cure in the Bulk Properties of Graphite Nanoplatelets Nanocomposites Printed via Stereolithography , 2020, Polymers.

[26]  K. Zheng,et al.  Epoxy composite with significantly improved thermal conductivity by constructing a vertically aligned three-dimensional network of silicon carbide nanowires/ boron nitride nanosheets , 2020 .

[27]  Gautam Choubey,et al.  Improvement of heat transfer through fins: A brief review of recent developments , 2020, Heat Transfer.

[28]  Martin Pumera,et al.  3D Printing for Electrochemical Energy Applications. , 2020, Chemical reviews.

[29]  K. Markandan,et al.  Enhanced mechanical properties of 3D printed graphene-polymer composite lattices at very low graphene concentrations , 2020, Composites Part A: Applied Science and Manufacturing.

[30]  Lixin Wu,et al.  A Novel Approach to Enhance Mechanical and Thermal Properties of SLA 3D Printed Structure by Incorporation of Metal–Metal Oxide Nanoparticles , 2020, Nanomaterials.

[31]  Hongbing Lu,et al.  Graphene related materials for thermal management , 2019, 2D Materials.

[32]  Jiahua Zhu,et al.  Significant improvement of thermal conductivities for BNNS/PVA composite films via electrospinning followed by hot-pressing technology , 2019, Composites Part B: Engineering.

[33]  C. Park,et al.  Thermal performance of modified polymeric heatsinks as an alternative for aluminum in heat rejection systems , 2019, Applied Thermal Engineering.

[34]  D. Meng,et al.  Thermal Conductivity of Defective Graphene Oxide: A Molecular Dynamic Study , 2019, Molecules.

[35]  H. Ali,et al.  Air cooled heat sink geometries subjected to forced flow: A critical review , 2019, International Journal of Heat and Mass Transfer.

[36]  Joan M Cabot,et al.  Three-Dimensional Printing of Abrasive, Hard, and Thermally Conductive Synthetic Microdiamond-Polymer Composite Using Low-Cost Fused Deposition Modeling Printer. , 2019, ACS applied materials & interfaces.

[37]  Shlomo Magdassi,et al.  Novel Materials for 3D Printing by Photopolymerization , 2018, Advanced materials.

[38]  O. Regev,et al.  Optimal nanomaterial concentration: harnessing percolation theory to enhance polymer nanocomposite performance , 2017, Nanotechnology.

[39]  He Hui,et al.  High through-plane thermal conductivity of polymer based product with vertical alignment of graphite flakes achieved via 3D printing , 2017 .

[40]  Xiuyuan Ni,et al.  The effect of the inorganic nanomaterials on the UV-absorption, rheological and mechanical properties of the rapid prototyping epoxy-based composites , 2017, Polymer Bulletin.

[41]  Stephen Johnston,et al.  Review of polymers for heat exchanger applications: Factors concerning thermal conductivity , 2017 .

[42]  Xin Wang,et al.  3D printing of polymer matrix composites: A review and prospective , 2017 .

[43]  E. Zussman,et al.  The multiple roles of a dispersant in nanocomposite systems , 2016 .

[44]  Lixin Wu,et al.  Structure-property relationship of nano enhanced stereolithography resin for desktop SLA 3D printer , 2016 .

[45]  Duckjong Kim,et al.  Ultrahigh Thermal Conductivity of Interface Materials by Silver‐Functionalized Carbon Nanotube Phonon Conduits , 2016, Advanced materials.

[46]  Azman Hassan,et al.  Recently emerging trends in thermal conductivity of polymer nanocomposites , 2016 .

[47]  Y. Huang,et al.  Thermal Conductivity of Polymer-Based Composites: Fundamentals and Applications , 2016 .

[48]  S. Riffat,et al.  Recent research developments in polymer heat exchangers – A review , 2016 .

[49]  Jen-Hsien Huang,et al.  Graphene-based thermoplastic composites and their application for LED thermal management , 2016 .

[50]  O. Regev,et al.  Graphene-Based Hybrid Composites for Efficient Thermal Management of Electronic Devices. , 2015, ACS applied materials & interfaces.

[51]  Paolo Iora,et al.  Evaluation of ORC modules performance adopting commercial plastic heat exchangers , 2015 .

[52]  B. Hong,et al.  Length-dependent thermal conductivity in suspended single-layer graphene , 2014, Nature Communications.

[53]  R. Lovrinčić,et al.  Critical parameters in exfoliating graphite into graphene. , 2013, Physical chemistry chemical physics : PCCP.

[54]  Seokwoo Jeon,et al.  Enhanced Thermal Conductivity of Epoxy–Graphene Composites by Using Non‐Oxidized Graphene Flakes with Non‐Covalent Functionalization , 2013, Advanced materials.

[55]  J. Coleman.  Liquid exfoliation of defect-free graphene. , 2013, Accounts of chemical research.

[56]  Peter Rodgers,et al.  Polymer Heat Exchangers—History, Opportunities, and Challenges , 2012 .

[57]  A. Fina,et al.  Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review , 2011 .

[58]  A. Balandin.  Thermal properties of graphene and nanostructured carbon materials. , 2011, Nature materials.

[59]  A. Jacobi,et al.  A review on polymer heat exchangers for HVAC&R applications , 2009 .

[60]  Zhen Li,et al.  Experimental investigation of plastic finned-tube heat exchangers, with emphasis on material thermal conductivity , 2009 .

[61]  Xin Wang,et al.  Carbon Nanosheets for Polymeric Nanocomposites with High Thermal Conductivity , 2009 .

[62]  A. A. Balandin,et al.  Lattice thermal conductivity of graphene flakes: Comparison with bulk graphite , 2009, 0904.0607.

[63]  I. Roppolo,et al.  UV-cured epoxy coating reinforced with sepiolite as inorganic filler , 2009 .

[64]  E. Samulski,et al.  Synthesis of water soluble graphene. , 2008, Nano letters.

[65]  Yi He,et al.  Rapid thermal conductivity measurement with a hot disk sensor: Part 1. Theoretical considerations , 2005 .

[66]  R. Jachuck,et al.  Review of polymer compact heat exchangers, with special emphasis on a polymer film unit , 2004 .

[67]  P. Nithiarasu,et al.  Numerical evaluation of additively manufactured lattice architectures for heat sink applications , 2021, International Journal of Thermal Sciences.

[68]  Y. Lam,et al.  Viscoelastic and high strain rate response of anisotropic graphene-polymer nanocomposites fabricated with stereolithographic 3D printing , 2021 .

[69]  Wenzhao Zhou,et al.  Architectured graphene and its composites: Manufacturing and structural applications , 2021 .

[70]  Jia‐Zhuang Xu,et al.  Highly thermal conductive, anisotropically heat-transferred, mechanically flexible composite film by assembly of boron nitride nanosheets for thermal management , 2020 .

[71]  John G. Lyons,et al.  Nanofillers can be used to enhance the thermal conductivity of commercially available SLA resins , 2019, Procedia Manufacturing.

[72]  Wei Yang,et al.  A Facile Route to Fabricate Highly Anisotropic Thermally Conductive Elastomeric POE/NG Composites for Thermal Management , 2018 .

[73]  Efrat Ruse,et al.  Performance of nano-carbon loaded polymer composites: Dimensionality matters , 2018 .

[74]  D. A. Reay,et al.  The use of polymers in heat exchangers , 1989 .