Feed-Forward Approach in Stator-Flux-Oriented Direct Torque Control of Induction Motor with Space Vector Pulse-Width Modulation

Two major obstacles in the utilization of electrical vehicles are their price and range. The collaboration of direct torque control (DTC) with induction motor (IM) is preferred for its low cost, easy implementation, and parameter independency. However, in terms of edges, the method has drawbacks, such as variable switching frequency and undesired current harmonic distortion. These drawbacks result in acoustic noise, reduced efficiency, and electromagnetic interference. A feed-forward approach for stator-flux-oriented DTC with space vector pulse-width modulation is presented in in this paper. The outcome of the proposed method is low current harmonic distortion with fixed switching frequency while preserving the torque performance and simple application feature of basic DTC. The method is applicable to existing and forthcoming IM drive systems via software adaptation. The validity of the proposed method is confirmed by simulation and experimental results.

[1]  Prasad Enjeti,et al.  An improved inverter output filter configuration reduces common and differential modes dv/dt at the motor terminals in PWM drive systems , 1998 .

[2]  Fuminori Kobayashi,et al.  A motor speed control system using a hybrid of dual-loop PLL and feed-forward , 2010, 2010 11th IEEE International Workshop on Advanced Motion Control (AMC).

[3]  Nigel Schofield.  Fundamentals of power-train design for all- and hybrid-electric road vehicles , 2014, 2014 IEEE Transportation Electrification Conference and Expo (ITEC).

[4]  Saad Mekhilef,et al.  A 12-Sector Space Vector Switching Scheme for Performance Improvement of Matrix-Converter-Based DTC of IM Drive , 2015, IEEE Transactions on Power Electronics.

[5]  Ahmed N. Abdalla,et al.  Modified Direct Torque Control using Algorithm Control of Stator Flux Estimation and Space Vector Modulation Based on Fuzzy Logic Control for Achieving High Performance from Induction Motors , 2013 .

[6]  Philip T. Krein,et al.  Evaluation of Induction and Permanent-Magnet Synchronous Machines Using Drive-Cycle Energy and Loss Minimization in Traction Applications , 2014, IEEE Transactions on Industry Applications.

[7]  Rahmi Guclu,et al.  Steering DTC algorithm for IPMSM used in electrical vehicle (EV)- with fast response and minimum torque ripple , 2010, 2010 11th IEEE International Workshop on Advanced Motion Control (AMC).

[8]  B. Brahmaiah,et al.  Discrete space vector modulation algorithm based vector controlled induction motor drives for reduced ripple , 2014, 2014 POWER AND ENERGY SYSTEMS: TOWARDS SUSTAINABLE ENERGY.

[9]  Marian P. Kazmierkowski,et al.  Direct torque control of PWM inverter-fed AC motors - a survey , 2004, IEEE Transactions on Industrial Electronics.

[10]  Junzhi Yu,et al.  A Loss-Minimization Port-Controlled Hamilton Scheme of Induction Motor for Electric Vehicles , 2015, IEEE/ASME Transactions on Mechatronics.

[11]  Shailendra Jain,et al.  Torque ripple reduction technique with improved flux response for a direct torque control induction motor drive , 2013 .

[12]  D. Howe,et al.  Acoustic noise radiated from direct torque controlled induction motor drives , 2000 .

[13]  Han Ho Choi,et al.  Nonlinear Optimal DTC Design and Stability Analysis for Interior Permanent Magnet Synchronous Motor Drives , 2015, IEEE/ASME Transactions on Mechatronics.

[14]  Takaji Umeno,et al.  A Novel Seamless Direct Torque Control for Electric Drive Vehicles , 2011 .

[15]  Jinmok Lee,et al.  SVPWM Overmodulation Scheme of Three-Level Inverters for Vector Controlled Induction Motor Drives , 2009 .

[16]  Heri Suryoatmojo,et al.  FEED-FORWARD NEURAL NETWORK FOR DIRECT TORQUE CONTROL OF INDUCTION MOTOR , 2011 .

[17]  C. Lascu,et al.  Combining the principles of sliding mode, direct torque control, and space-vector modulation in a high-performance sensorless AC drive , 2002, IEEE Transactions on Industry Applications.

[18]  Kayhan Gulez,et al.  Reduction of torque pulsation and noises in PMSM with hybrid filter topology , 2011, Simul. Model. Pract. Theory.

[19]  G. Satheesh,et al.  A Novel Space Vector PWM Based Direct Torque Control Algorithm for Open End Winding Induction Motor Drive , 2013 .

[20]  Toshihiko Noguchi,et al.  A New Quick-Response and High-Efficiency Control Strategy of an Induction Motor , 1986, IEEE Transactions on Industry Applications.

[21]  Xiangzhou Wang,et al.  The active disturbance rejection control with feed-forward compensation for hydraulic pump controlled motor speed system , 2014, Fifth International Conference on Intelligent Control and Information Processing.

[22]  Alice Mary Karlapudy,et al.  Implementation of Thrust Ripple Reduction for a Permanent Magnet Linear Synchronous Motor Using an Adaptive Feed Forward Controller , 2014 .

[23]  Lin Jiang,et al.  Traction motors and speed estimation techniques for sensorless control of electric vehicles: A review , 2014, 2014 49th International Universities Power Engineering Conference (UPEC).

[24]  L.M. Tolbert,et al.  Direct torque control of induction machines using space vector modulation , 1991, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting.

[25]  R.D. Lorenz,et al.  Stator and rotor flux based deadbeat direct torque control of induction machines , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[26]  L. Tang,et al.  An investigation of a modified direct torque control strategy for flux and torque ripple reduction for induction machine drive system with fixed switching frequency , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[27]  Peter Vas,et al.  Sensorless vector and direct torque control , 1998 .

[28]  Nik Rumzi Nik Idris,et al.  A review of direct torque control of induction motors for sustainable reliability and energy efficient drives , 2014 .

[29]  M. Depenbrock,et al.  Direct self-control (DSC) of inverter-fed induction machine , 1988 .

[30]  R.D. Lorenz,et al.  Digital Implementation of Stator and Rotor Flux-Linkage Observers and a Stator-Current Observer for Deadbeat Direct Torque Control of Induction Machines , 2009, IEEE Transactions on Industry Applications.

[31]  Ahmed Masmoudi,et al.  On the comparison between different space vector PWM strategies implemented in FSTPI‐fed induction motor drives , 2007 .

[32]  S.J. Imen,et al.  Feed forward adaptive control of a linear brushless DC motor , 2007, SICE Annual Conference 2007.

[33]  Yen-Shin Lai,et al.  A New Approach to Direct Torque Control of Induction Motor Drives for Constant Inverter Switching Frequency and Torque Ripple Reduction Yen-Shin Lai, Member, IEEEand Jian-Ho Chen , 2001 .

[34]  O. A. Mahgoub,et al.  Implementation of a new fast direct torque control algorithm for induction motor drives , 2010 .

[35]  Demba Diallo,et al.  A Loss-Minimization DTC Scheme for EV Induction Motors , 2005, IEEE Transactions on Vehicular Technology.

[36]  G. Pellegrino,et al.  Comparison of Induction and PM Synchronous Motor Drives for EV Application Including Design Examples , 2012, IEEE Transactions on Industry Applications.