Novel sustainable metallic powder production process with water used as milling medium

[1]  Mihai Andronie,et al.  Sustainable, Smart, and Sensing Technologies for Cyber-Physical Manufacturing Systems: A Systematic Literature Review , 2021, Sustainability.

[2]  Z. Hamlati,et al.  Effects of Minor Elements Additions to the Nanocrystalline FeAl Alloy Produced by Powder Metallurgy , 2020 .

[3]  M. Afrand,et al.  The rheological behavior of MWCNTs–ZnO/Water–Ethylene glycol hybrid non-Newtonian nanofluid by using of an experimental investigation , 2020 .

[4]  D. Toghraie,et al.  Experimental measurements of thermal conductivity of engine oil-based hybrid and mono nanofluids with tungsten oxide (WO3) and MWCNTs inclusions , 2020 .

[5]  P. Mikula,et al.  The Influence of Powder Milling on Properties of SPS Compacted FeAl , 2020, Molecules.

[6]  J. Maroušek,et al.  Advances in the agrochemical utilization of fermentation residues reduce the cost of purpose-grown phytomass for biogas production , 2020 .

[7]  M. Polański,et al.  Direct Synthesis of Fe-Al Alloys from Elemental Powders Using Laser Engineered Net Shaping , 2020, Materials.

[8]  J. Suñol,et al.  Structural, magnetic and thermal characterization of Fe50Se50 powders obtained by mechanical alloying , 2019, Journal of Thermal Analysis and Calorimetry.

[9]  A. H. Isfahani,et al.  An experimental study on MWCNT–water nanofluids flow and heat transfer in double-pipe heat exchanger using porous media , 2019, Journal of Thermal Analysis and Calorimetry.

[10]  Jiří Peterka,et al.  Ferrous sludge from water clarification: Changes in waste management practices advisable , 2019, Journal of Cleaner Production.

[11]  J. Jandačka,et al.  Modelling of Heat Transfer in the Evaporator and Condenser of the Working Fluid in the Heat Pipe , 2019 .

[12]  A. Shahsavar,et al.  Experimental investigation and develop ANNs by introducing the suitable architectures and training algorithms supported by sensitivity analysis: Measure thermal conductivity and viscosity for liquid paraffin based nanofluid containing Al2O3 nanoparticles , 2019, Journal of Molecular Liquids.

[13]  D. Toghraie,et al.  Effects of nanoparticles to present a statistical model for the viscosity of MgO-Water nanofluid , 2019, Powder Technology.

[14]  M. Afrand,et al.  Experimental evaluation of dynamic viscosity of ZnO–MWCNTs/engine oil hybrid nanolubricant based on changes in temperature and concentration , 2018, Journal of Thermal Analysis and Calorimetry.

[15]  D. Toghraie,et al.  An experimental study on rheological behavior of a nanofluid containing oxide nanoparticle and proposing a new correlation , 2018 .

[16]  Katarina Valaskova,et al.  Bankruptcy Prevention: New Effort to Reflect on Legal and Social Changes , 2017, Sci. Eng. Ethics.

[17]  M. Salazar,et al.  FeAl powder fabrication by rapid solidification and water vapour-based process , 2016 .

[18]  G. Rosas,et al.  Hydrogen generation by aluminum hydrolysis using the Fe2Al5 intermetallic compound , 2016 .

[19]  C. Motz,et al.  A Review on the Properties of Iron Aluminide Intermetallics , 2016 .

[20]  V. Paidar.  Iron Aluminides and Petr Kratochvíl , 2015 .

[21]  Petr Braun,et al.  Analysis of Czech Subsidies for Solid Biofuels , 2015 .

[22]  Ryuta Sato,et al.  Optimal workpiece orientation to reduce the energy consumption of a milling process , 2015 .

[23]  M. Espinosa-Medina,et al.  Phase Evaluation and its Hydrogen Correlation of the FeAl3 and FeAl2 Intermetallic Alloys during Mechanical Ball-Milling with Water , 2014 .

[24]  D. Espinosa,et al.  Making iron aluminides out of scrap , 2014 .

[25]  David Dornfeld,et al.  Moving towards green and sustainable manufacturing , 2014 .

[26]  D. S. Khaerudini,et al.  Effect of CeO2 addition on the properties of FeAl based alloy produced by mechanical alloying technique , 2013 .

[27]  M. Jabłońska,et al.  The Specific Heat Capacity and Oxidation Kinetics of NiAl, FeAl and TiAl Alloys , 2013 .

[28]  D. G. Morris,et al.  Recent Developments Toward the Application of Iron Aluminides in Fossil Fuel Technologies , 2011 .

[29]  K. G. Tsakalakis,et al.  Modelling the Specific Grinding Energy and Ball-Mill Scaleup , 2004 .

[30]  Wangyu Hu,et al.  Synthesis and Characterization of Nanocrystalline Iron Aluminide Intermetallic Compounds , 2003 .

[31]  E. Godlewska,et al.  FeAl materials from intermetallic powders , 2003 .

[32]  M. S. El-shall,et al.  Preparation of ultrafine and nanocrystalline FeAl powders , 2002 .

[33]  G. Chen,et al.  Moisture induced environmental embrittlement of intermetallics , 2001 .

[34]  Barrett E. Eichler,et al.  Synthesis and Characterization of , 2001, Angewandte Chemie.

[35]  F. H. Sanchez,et al.  Mechanical milling of the intermetallic compound AlFe , 1999 .

[36]  P. Maziasz,et al.  Processing and alloying effects on tensile and impact properties of FeAl alloys , 1998 .

[37]  Internet of Things-enabled Sustainability, Industrial Big Data Analytics, and Deep Learning-assisted Smart Process Planning in Cyber-Physical Manufacturing Systems , 2020, Economics, Management, and Financial Markets.

[38]  Networked, Smart, and Responsive Devices in Industry 4.0 Manufacturing Systems , 2020, Economics, Management, and Financial Markets.

[39]  Deep Learning-enabled Smart Process Planning in Cyber-Physical System-based Manufacturing , 2020, Journal of Self-Governance and Management Economics.

[40]  I. D. Paul,et al.  A Review on Green Manufacturing: It's Important, Methodology and its Application☆ , 2014 .

[41]  G. Rosas,et al.  EVALUATION OF HYDROGEN EMBRITTLEMENT IN FeAl ASSISTED BY MECHANICAL MILLING , 2013 .

[42]  J. Suñol,et al.  Influence of Heat Treatments on the Structure of FeAl Powders Mixture Obtained by Mechanical Alloying , 2013 .

[43]  T. Śleboda,et al.  The effect of alloy powder morphology on microstructural evolution of hot worked P/M FeAl , 2007 .

[44]  P. Campbell.  The CASTRIP Process : A revolutionary casting technology , an exciting opportunity for unique steel products or a new model for steel Micro-Mills ? , 2004 .