Squeal analysis based on the laboratory experimental bench “Friction-Induced Vibration and noisE at École Centrale de Lyon” (FIVE@ECL)

Abstract This paper presents a new experimental test bench, called Friction-Induced Vibration and noisE at Ecole Centrale de Lyon (FIVE@ECL). This experimental bench aims at discussing some of the open issues in understanding squealing disc brakes. Measurements for friction-induced vibration and squeal noise are performed to investigate the dynamic behavior of the system under study and its squeal characterization through experiments. One of the main original contributions is to share the data sets to give the opportunity to researchers for conducting new analysis and testing numerical models of brake system with the proposed data of squeal noise. The data provided include all the measurements on the two pads, the caliper and the disc, as well as the measurement of pressure in near-field and in far-field.

[1]  R. F. Nunes,et al.  Improvement in the predictivity of squeal simulations: Uncertainty and robustness , 2014 .

[2]  Oliviero Giannini,et al.  Experimental analysis of brake squeal noise on a laboratory brake setup , 2006 .

[3]  Aldo Sestieri,et al.  Predictive model of squeal noise occurring on a laboratory brake , 2006 .

[4]  Louis Jezequel,et al.  Friction-induced vibration for an aircraft brake system—Part 1: Experimental approach and stability analysis , 2006 .

[5]  Diego Masotti,et al.  An experimental analysis of the methods for brake squeal quantification , 2017 .

[6]  Laurent Baillet,et al.  Contact surface topography and system dynamics of brake squeal , 2008 .

[7]  David Tabor,et al.  Friction—The Present State of Our Understanding , 1981 .

[8]  Philippe Dufrenoy,et al.  Influence of geometry imperfections on squeal noise linked to mode lock-in , 2015 .

[9]  Joseph C. S. Lai,et al.  Brake squeal: a literature review , 2002 .

[10]  Oliviero Giannini,et al.  Characterization of the high-frequency squeal on a laboratory brake setup , 2008 .

[11]  Ken Nakano,et al.  Effect of yaw angle misalignment on brake noise and brake time in a pad-on-disc-type apparatus with unidirectional compliance for pad support , 2014 .

[12]  M. Kchaou,et al.  Squealing characteristics of worn brake pads due to silica sand embedment into their friction layers , 2016 .

[13]  J. Sukumaran,et al.  Morphological analysis of pad–disc system during braking operations , 2016 .

[14]  Dieter Weichert,et al.  An experimental investigation of hot spots in railway disc brakes , 2004 .

[15]  Yves Berthier,et al.  Tribological, thermal and mechanical coupling aspects of the dry sliding contact , 2007 .

[16]  B. Persson.  Relation between interfacial separation and load: a general theory of contact mechanics. , 2007, Physical review letters.

[17]  Xavier Lorang,et al.  A global strategy based on experiments and simulations for squeal prediction on industrial railway brakes , 2013 .

[18]  P. E. Gautier,et al.  TGV disc brake squeal , 2006 .

[19]  J. Colliat,et al.  Methodology of porosity modeling for friction pad: Consequence on squeal , 2017 .

[20]  Franck Massa,et al.  Experimental investigations for uncertainty quantification in brake squeal analysis , 2016 .

[21]  Louis Jezequel,et al.  Simulations and Experiments of a Nonlinear Aircraft Braking System With Physical Dispersion , 2010 .

[22]  Aldo Sestieri,et al.  Brake squeal: Linear and nonlinear numerical approaches , 2007 .

[23]  Laurent Baillet,et al.  Brake squeal as dynamic instability: An experimental investigation , 2006 .

[24]  Oliver M. O’Reilly,et al.  Automotive disc brake squeal , 2003 .

[25]  Philippe Dufrenoy,et al.  A multiscale method for frictionless contact mechanics of rough surfaces , 2016 .

[26]  Aldo Sestieri,et al.  Disc brake squeal characterization through simplified test rigs , 2009 .

[27]  Abd Rahim Abu Bakar,et al.  Effects of External Hard Particles on Brake Noise of Disc Braking System , 2013 .

[28]  Jiliang Mo,et al.  How do grooves on friction interface affect tribological and vibration and squeal noise performance , 2017 .

[29]  T. Butlin,et al.  Friction-induced vibration: Model development and comparison with large-scale experimental tests , 2013 .

[30]  Abd Rahim AbuBakar,et al.  Complex eigenvalue analysis and dynamic transient analysis in predicting disc brake squeal , 2006 .

[31]  Abd Rahim Abu Bakar,et al.  Experimental studies of friction-induced brake squeal: Influence of environmental sand particles in the interface brake pad-disc , 2017 .

[32]  Raouf A. Ibrahim,et al.  Friction-Induced Vibration, Chatter, Squeal, and Chaos—Part II: Dynamics and Modeling , 1994 .

[33]  Georg-Peter Ostermeyer,et al.  Instabilities in the sliding of continua with surface inertias: An initiation mechanism for brake noise , 2011 .

[34]  Hartmut Hetzler,et al.  On the influence of contact tribology on brake squeal , 2012 .

[35]  Michele Ciavarella,et al.  Incipient sliding of rough surfaces in contact: a multiscale numerical analysis , 2001 .

[36]  T. Butlin,et al.  A systematic experimental study of squeal initiation , 2011 .

[37]  P. Dufrénoy,et al.  History effect on squeal with a mesoscopic approach to friction materials , 2017 .

[38]  Sebastian Oberst,et al.  Statistical analysis of brake squeal noise , 2011 .

[39]  Jiliang Mo,et al.  Noise performance improvements and tribological consequences of a pad-on-disc system through groove-textured disc surface , 2016 .