论文信息 - Study of the Influence of the Cutting Parameters on the Chip Geometry During Machining Alloy UNS A97075

Study of the Influence of the Cutting Parameters on the Chip Geometry During Machining Alloy UNS A97075

Abstract This paper aims to discuss machining cutting with zinc base aluminum alloys for aircraft applications (UNS A97075) through research and development activities, as well as experiments based on the turning process with specific machining conditions -cutting speed, feed rate and cutting depth. In addition, some macro scale studies were performed on the tool life as well as experimental measuring using stereoscopic optical microscopy (SOM) techniques on the chip. The relation between influence cutting parameters on the chip geometry during machining can be used to determine the optimal cutting conditions for other processes.

Mariano Marcos | Lorenzo Sevilla | F. J. Trujillo | Y. Sanchez

[1] F. Girot,et al. A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti–6Al–4V , 2008 .

[2] T. Hausotte,et al. Metrological Evaluation of Secondary Adhesion Wear Effects in the Dry Turning of UNS-A92024-T3 Alloy through Focus-variation Microscopy (FVM)☆ , 2013 .

[3] J. Salguero,et al. SOM based Methodology for Evaluating Shrinkage Parameter of the Chip Developed in Titanium Dry Turning Process , 2013 .

[4] Jorge Salguero,et al. Using Image Analysis Techniques for Single Evaluation of the Chip Shrinkage Factor in Orthogonal Cutting Process , 2012 .

[5] E. A. Starke,et al. Progress in structural materials for aerospace systems , 2003 .

[6] L. Zhao,et al. Lightweight materials for aircraft applications , 1995 .

[7] T.H.G. Megson. Structural components of aircraft , 2012 .

[8] E. Ezugwu,et al. An overview of the machinability of aeroengine alloys , 2003 .

[10] Mariano Marcos,et al. Influence of the Axial Machining Length on Microgeometrical Deviations of Horizontally Dry-turned UNS A97075 Al-Zn Alloy , 2013 .

[11] J. T. Staley,et al. Application of modern aluminum alloys to aircraft , 1996 .

[12] Eva Rubio,et al. Experimental Analysis of the Cutting Forces Obtained in Dry Turning Processes of UNS A97075 Aluminium Alloys , 2013 .

[13] W. S. Miller,et al. Recent development in aluminium alloys for aerospace applications , 2000 .