Solid Freeform Fabrication: A New Direction in Manufacturing

[1]  R. S. Khurmi.pdf,et al.  Strength of Materials , 1908, Nature.

[2]  J. Frenkel.  Viscous Flow of Crystalline Bodies under the Action of Surface Tension , 1945 .

[3]  C. Walling.  Gel Formation in Addition Polymerization1 , 1945 .

[4]  J. C. Jaeger,et al.  Conduction of Heat in Solids , 1952 .

[5]  F. T. Wall,et al.  Principles of Polymer Chemistry. Paul J. Flory.Cornell Univ. Press, Ithaca, New York, 1953. 688pp. Illus. $8.50 , 1954 .

[6]  W. Jones,et al.  Fundamental principles of powder metallurgy , 1960 .

[7]  J. Currie,et al.  Gaseous diffusion in porous media Part 1. - A non-steady state method , 1960 .

[8]  S. Rice,et al.  Properties and Structure of Polymers , 1960 .

[9]  W. Hawkins,et al.  Thermal and oxidative degradation of polymers , 1964 .

[10]  D. Swift.  The thermal conductivity of spherical metal powders including the effect of an oxide coating , 1966 .

[11]  William W. Graessley.  The Entanglement Concept in Polymer Rheology , 1974 .

[12]  George W. Scherer,et al.  Sintering of Low-Density Glasses: I, Theory , 1977 .

[13]  P. W. Dietz,et al.  Effective Thermal Conductivity of Packed Beds , 1979 .

[14]  S. Shalaby.  Radiative degradation of synthetic polymers: Chemical physical, environmental, and technological considerations , 1979 .

[15]  Z. Tadmor,et al.  Principles of Polymer Processing , 1979 .

[16]  Keith Masters,et al.  Spray drying handbook , 1979 .

[17]  Powder metallurgy — principles and applications: F.V. Fenel The Metal Powder Industries Federation, Princeton, New Jersey USA S55 , 1981 .

[18]  W. Duley.  Laser processing and analysis of materials , 1983 .

[19]  H. Emblem.  Ethyl-silicate-bonded refractories , 1983 .

[20]  M. Ashby,et al.  Mechanisms of hot-isostatic pressing , 1983 .

[21]  L. H. Bennett,et al.  Alloy phase diagrams , 1984 .

[22]  R. German.  Powder metallurgy science , 1984 .

[23]  G. Scherer.  Viscous Sintering of a Bimodal Pore‐Size Distribution , 1984 .

[24]  C. R. Wildemuth,et al.  Viscosity of suspensions modeled with a shear-dependent maximum packing fraction , 1984 .

[25]  Randall M. German,et al.  Liquid Phase Sintering , 1985 .

[26]  Takashi Kashiwagi,et al.  Thermal and oxidative degradation of poly(methyl methacrylate) molecular weight , 1985 .

[27]  A. B. Metzner.  Rheology of Suspensions in Polymeric Liquids , 1985 .

[28]  G. Scherer.  Viscous Sintering under a Uniaxial Load , 1986 .

[29]  G. Menges,et al.  How to make injection molds , 1987 .

[30]  O. Manca,et al.  A comparison between models of thermal fields in laser and electron beam surface processing , 1988 .

[31]  D. Dewitt,et al.  Theory and practice of radiation thermometry , 1988 .

[32]  Randall M. German,et al.  Particle packing characteristics , 1989 .

[33]  谷口 紀男.  Energy-beam processing of materials : advanced manufacturing using various energy sources , 1989 .

[34]  Joseph J. Beaman,et al.  Parametric Analysis of the Selective Laser Sintering Process , 1990 .

[35]  Book reviewParticle packing characteristics : by Randall M. German, published by Metal Powder Industries Federation, Princeton, NJ, U.S.A., 1989; 443 pp., ISBN 0-918404-83-5 US$ 78 , 1990 .

[36]  Prediction of the Thermal Conductivity of Beds Which Contain Polymer Coated Metal Particles , 1990 .

[37]  J. W. Barlow,et al.  Thermal Properties of Powders , 1990 .

[38]  Models for the Prediction of the Thermal , 1991 .

[39]  J. W. Barlow,et al.  Effect of Polymer Coatings as Intermediate Binders on Sintering of Ceramic Parts , 1991 .

[40]  Plasma and laser processing of materials , 1991 .

[41]  R. J. Kee,et al.  Chemkin-II : A Fortran Chemical Kinetics Package for the Analysis of Gas Phase Chemical Kinetics , 1991 .

[42]  A Model for Partial Viscous Sintering , 1991 .

[43]  W. W. Duley,et al.  CO2 laser welding of polymers , 1992 .

[44]  Paul F. Jacobs,et al.  Rapid Prototyping & Manufacturing: Fundamentals of Stereolithography , 1992 .

[45]  Ceramic Structures by Selective Laser Sintering of Microencapsulated, Finely Divided Ceramic Materials , 1992 .

[46]  Walters.  Rapid Prototyping Using FDM: A Fast, Precise, Safe Technology , 1992 .

[47]  Joseph J. Beaman,et al.  Direct Selective Laser Sintering of High Temperature Materials , 1992 .

[48]  T. Claar,et al.  Fabrication of Ceramic and Metal Matrix Composites From Selective Laser Sintered Ceramic Preforms , 1993 .

[49]  J. Beaman,et al.  Model of the selective laser sintering of bisphenol-A polycarbonate , 1993 .

[50]  H. L. Marcus,et al.  Development of Nanocomposites for Solid Freeform Fabrication , 1993 .

[51]  William Thomas Carter,et al.  Direct Laser Sintering of Metals , 1993 .

[52]  J. Throne,et al.  Polymer Engineering Principles: Properties, Processes, and Tests for Design , 1993 .

[53]  Indirect Metal Composite Part Manufacture Using the SLS Process , 1993 .

[54]  Stereolithography Epoxy Resin Development: Accuracy and Dimensional Stability , 1993 .

[55]  Joel W. Barlow,et al.  Silicon Carbide Preforms for Metal Infiltration by Selective Laser Sintering™ of Polymer Encapsulated Powders , 1993 .

[56]  Michael J. Cima,et al.  Structural Ceramic Components by 3D Printing , 1993 .

[57]  Paul F. Jacobs,et al.  QuickCast™ & Rapid Tooling: A Case History at Ford Motor Company , 1994 .

[58]  Sprayed Metal Shells for Tooling: Improving the Mechanical Properties , 1994 .

[59]  Joseph J. Beaman,et al.  Development of a poly(methyl methacrylate‐co‐n‐butyl methacrylate) copolymer binder system , 1994 .

[60]  J. W. Barlow,et al.  Selective Laser Sintering of Calcium Phosphate Powders , 1994 .

[61]  James W. Comb,et al.  FDM® Technology Process Improvements , 1994 .

[62]  M. L. Griffith,et al.  Ultraviolet Curing of Highly Loaded Ceramic Suspensions for Stereolithography of Ceramics , 1994 .

[63]  Emanuel M. Sachs,et al.  Computer-derived microstructures by 3D Printing: Sio- and Structural Materials , 1994 .

[64]  Paul F. Forderhase,et al.  SLSTM Prototypes From Nylon , 1994 .

[65]  Fundamentals of Liquid Phase Sintering Related to Selective Laser Sintering , 1994 .

[66]  C. Griffin,et al.  Solid Freeform Fabrication of Functional Ceramic Components Using a Laminated Object Manufacturing Technique , 1994 .

[67]  J. W. Barlow,et al.  Measurement and Prediction of the Thermal Conductivity of Powders at High Temperatures , 1994 .

[68]  B. Badrinarayan,et al.  Manufacture Of Injection Molds Using SLS , 1994 .

[69]  Kevin McAlea,et al.  Improvements in SLS Part Accuracy , 1995 .

[70]  David L. Bourell,et al.  Selective Laser Sintering of Polymer-Coated Silicon Carbide Powders , 1995 .

[71]  Patrick J. Creegan,et al.  Predicting and Controlling Resolution and Surface Finish of Ceramic Objects Produced by Stereodeposition Processes , 1995 .

[72]  Thermal Design Parameters Critical to the Development of Solid Freeform Fabrication of Structural Materials with Controlled Nano-liter Droplets , 1995 .

[73]  David L. Bourell,et al.  Post‐processing of selective laser sintered metal parts , 1995 .

[74]  J. Pegna,et al.  Three-Dimensional Laser Chemical Vapor Deposition of Nickel-Iron Alloys , 1995 .

[75]  John W. Halloran,et al.  Ceramic Stereolithography for Investment Casting and Biomedical Applications , 1995 .

[76]  H. Marcus,et al.  Selective Laser Sintering Preparation and Tribological Testing of Nanostructured Tungsten Carbide-Cobalt Composites , 1995 .

[77]  Joel W. Barlow,et al.  Emissivity of Powder Beds , 1995 .

[78]  Scott McMillin,et al.  Selective Laser Sintering and Fused Deposition Modeling Processes For Functional Ceramic Parts , 1995 .

[79]  The Development of a SLS Composite Material , 1995 .

[80]  Lena Apelskog Killander.  Rapid Mould: epoxy‐infiltrated, laser‐sintered inserts , 1996 .

[81]  Joel W. Barlow,et al.  A thermal model of polymer degradation during selective laser sintering of polymer coated ceramic powders , 1996 .

[82]  Kevin McAlea,et al.  Selective Laser Sintering of Metal Molds: The Rapidtool Process , 1996 .

[83]  H. Marcus,et al.  Design of a Closed Loop Computer Controlled System for Selective Area Laser Deposition. I. Laser Systems, Gasflow, and Substrate Temperature Control , 1996 .

[84]  J. W. Barlow,et al.  Biocompatibility of SLS-Formed Calcium Phosphate Implants , 1996 .

[85]  Jean-Pierre Kruth,et al.  Selective laser sintering of hard metal powders , 1998 .

[86]  David L. Bourell,et al.  Solid Freeform Fabrication Proceedings -1999 , 1999 .