Using Sweep and Dihedral to Control Three-Dimensional Flow in Transonic Stators of Axial Compressors

The paper describes an advanced three-dimensional blading concept for highly loaded transonic compressor stators. The concept takes advantage of the aerodynamic effects of sweep and dihedral. To the knowledge of the authors this is the first approach reported in the open literature that combines those two basic types of lean in an engine-worthy aerofoil design. The paper makes a contribution to the understanding of the endwall effect of both features with special emphasis put on sweep. The advanced three-dimensional blading concept was applied to an Engine Section Stator (ESS) of an aero-engine fan. In order to demonstrate how three-dimensional flow can be controlled, numerical analysis of the flow structure in a conventional and an advanced stator configuration was performed using a three-dimensional Navier-Stokes solver. The numerical analysis showed the advanced blade improving both radial loading distribution and the three-dimensional endwall boundary layer development. In particular, a strong hub corner stall could be largely alleviated. High-speed rig testing of the advanced ESS confirmed the concept and showed good qualitative agreement between measurement and prediction. The work presented was closely linked to the development of the BR710 engine on which the advanced ESS is in service today.

[1]  William N. Dawes.  Multi-Blade Row Navier-Stokes Simulations of Fan-Bypass Configurations , 1991 .

[2]  C. R. Lejambre,et al.  Development and Application of a Multistage Navier-Stokes Flow Solver: Part II — Application to a High Pressure Compressor Design , 1995 .

[3]  B. F. Beacher,et al.  Three-Dimensional Relief in Turbomachinery Blading , 1989 .

[4]  H. D. Weingold,et al.  Development of Controlled Diffusion Airfoils for Multistage Compressor Application , 1983 .

[5]  C. R. Lejambre,et al.  1995 ASME Gas Turbine Award Paper: Development and Application of a Multistage Navier–Stokes Flow Solver: Part II—Application to a High-Pressure Compressor Design , 1998 .

[6]  Christopher J. Robinson.  End-wall flows and blading design for axial flow compressors , 1991 .

[7]  Erbing Shang,et al.  THE EXPERIMENTAL INVESTIGATIONS ON THE COMPRESSOR CASCADES WITH LEANED AND CURVED BLADE , 1993 .

[8]  Leroy H. Smith,et al.  Sweep and Dihedral Effects in Axial-Flow Turbomachinery , 1963 .

[9]  Guohua Wu,et al.  An experimental investigation of technologies of endwall flow control in a compressor plane cascade , 1991 .

[10]  William N. Dawes,et al.  Development of a 3D Navier Stokes Solver for Application to all Types of Turbomachinery , 1988 .

[11]  Roy F Behlke,et al.  Reduction of Compressor Stator Endwall Losses Through the Use of Bowed Stators , 1995 .

[12]  David J. Peake,et al.  Topology of Three-Dimensional Separated Flows , 1982 .

[13]  W. Dawes,et al.  Toward Improved Throughflow Capability: The Use of Three-Dimensional Viscous Flow Solvers in a Multistage Environment , 1992 .

[14]  M. S. Chong,et al.  A Description of Eddying Motions and Flow Patterns Using Critical-Point Concepts , 1987 .

[15]  R. F. Behlke.  The development of a second generation of controlled diffusion airfoils for multistage compressors , 1986 .

[16]  F. A. E. Breugelmans,et al.  Comparison of Sweep and Dihedral Effects on Compressor Cascade Performance , 1997 .

[17]  James M. M. Place,et al.  Three-dimensional flow in core compressors. , 1997 .