Long-term performance of DMFC based on the blend membrane of sulfonated poly(ether ether ketone) and poly(vinylidene fluoride)

Abstract A small amount of incorporation of PVdF to sPEEK membrane enhanced very significantly the interfacial stability between membrane and electrode due to the improved dimensional stability of membrane. The cell based on both the blend membrane and electrode with conventional Nafion binder could achieve a long-term stability up to 1650 h at 30 °C with high cell performance of 70 mW cm−2. The high chemical and dimensional stability of the blend membrane also contributed to long-term high performance of the cell. This is more meaningful because hydrocarbon-based membrane rather than Nafion membrane is used in the cell system. It is thus suggested that sPEEK (97.5 wt%)/PVdF (2.5 wt%) blend membrane can be a candidate for successful applications to high performance DMFC with high economic advantage.

[1]  Jung-Ki Park,et al.  Blend membranes based on sulfonated poly(ether ether ketone) and poly(vinylidene fluoride) for high performance direct methanol fuel cell , 2007 .

[2]  J. Wootthikanokkhan,et al.  Methanol permeability and properties of DMFC membranes based on sulfonated PEEK/PVDF blends , 2006 .

[3]  Q. Xin,et al.  Sulfonated poly (ether ether ketone)/polyvinylidene fluoride polymer blends for direct methanol fuel cells , 2006 .

[4]  Sanjeev Mukerjee,et al.  Investigation of Durability Issues of Selected Nonfluorinated Proton Exchange Membranes for Fuel Cell Application , 2006 .

[5]  Mahaveer D. Kurkuri,et al.  Sulfonated poly(arylene ether sulfone) as an electrode binder for direct methanol fuel cell , 2007 .

[6]  Zhigang Qi,et al.  Open circuit voltage and methanol crossover in DMFCs , 2002 .

[7]  Bryan S. Pivovar,et al.  Proton exchange membrane for DMFC and H2/air fuel cells: Synthesis and characterization of partially fluorinated disulfonated poly(arylene ether benzonitrile) copolymers , 2007 .

[8]  Michael D. Guiver,et al.  Properties of SPEEK based PEMs for fuel cell application , 2003 .

[9]  Yanxiang Li,et al.  Tensile behavior of Nafion and sulfonated poly(arylene ether sulfone) copolymer membranes and its morphological correlations , 2006 .

[10]  G. Yin,et al.  Proton exchange membranes based on poly(vinylidene fluoride) and sulfonated poly(ether ether ketone) , 2006 .

[11]  Hubert A. Gasteiger,et al.  Handbook of Fuel Cells , 2010 .

[12]  K. Miyatake,et al.  Poly(arylene ether) Ionomers Containing Sulfofluorenyl Groups for Fuel Cell Applications , 2005 .