Design of Hamming Code Checker Using Titanium-Diffused Lithium Niobate-Based Waveguide

ABSTRACT This work presents an electro-optic effect-based design for the widely used Hamming code for checking single bit errors in the received data. The structure is based on Mach-Zehnder Interferometer, designed using Titanium-diffused Lithium Niobate-based waveguides. The proposed device has been successfully tested using the beam propagation method. For a received 7-bit code, the three simultaneously generated check bits are combined to check the error position. Critical performance parameters like extinction ratio (24.39dB), contrast ratio (25.711dB), insertion loss (0.041dB), and amplitude modulation (0.079dB) calculated for the overall device are within acceptable limits for the feasibility of the device.

[1]  鬼頭 勤,et al.  Introduction to optical waveguide analysis : solving Maxwell's equations and the Schrödinger equation , 2001 .

[2]  Gd Giok-Djan Khoe,et al.  Optical packet switching and buffering by using all-optical signal processing methods , 2003 .

[3]  Sang-Kook Han,et al.  10 Gbit/s all-optical composite logic gates with XOR, NOR, OR and NAND functions using SOA-MZI structures , 2006 .

[4]  R. Tucker,et al.  Switching Energy and Device Size Limits on Digital Photonic Signal Processing Technologies , 2008, IEEE Journal of Selected Topics in Quantum Electronics.

[5]  R. P. Yadav,et al.  Modeling of a high performance Mach-Zehnder interferometer all optical switch , 2012 .

[6]  G. V. Treyz.  Silicon Mach-Zehnder waveguide interferometers operating at 1.3 mu m , 1991 .

[7]  Sourangshu Mukhopadhyay,et al.  Parity Checking and Generating Circuit with Nonlinear Material in All-Optical Domain , 2005 .

[8]  K. Ahmmed,et al.  Optimization of 2×2 MZI electro-optic switch and its application as logic gate , 2015, 2015 18th International Conference on Computer and Information Technology (ICCIT).

[9]  Yongqi He,et al.  Extinction ratio effect for high-speed optical fiber transmissions , 1998, ICCT'98. 1998 International Conference on Communication Technology. Proceedings (IEEE Cat. No.98EX243).

[10]  G. Agrawal.  Lightwave Technology: Components and Devices , 2004 .

[11]  Santosh Kumar,et al.  Error detecting code for long haul network , 2018, OPTO.

[12]  Punya Prasanna Paltani,et al.  Novel All-Optical Switch Using Nonlinear Mach-Zehnder Interferometer , 2009 .

[13]  A. Kelly,et al.  All-optical parity checker with bit-differential delay , 1999 .

[14]  John M. Senior,et al.  Optical Fiber Communications: Principles and Practice , 2008 .

[15]  Jian Wang,et al.  Design and analysis of all-optical XOR gate using SOA-based Mach–Zehnder interferometer , 2003 .

[16]  Michel Savoie,et al.  2×2 MMI-MZI GaAs-GaAlAs carrier-injection optical switch , 2010, IEEE Photonics Society Summer Topicals 2010.

[17]  Sang‐Kook Han,et al.  All-optical multiple logic gates with XOR, NOR, OR, and NAND functions using parallel SOA-MZI structures: theory and experiment , 2006, Journal of Lightwave Technology.

[18]  Xiaodi Tan,et al.  Phase modulated high density collinear holographic data storage system with phase-retrieval reference beam locking and orthogonal reference encoding. , 2018, Optics express.

[19]  R. P. Yadav,et al.  indiffused Lithium Niobate ( Ti : LiNbO 3 ) Mach-Zehnder interferometer all optical switches : A review , 2020 .

[20]  Electro-optics , 2019, Crystal Optics.

[21]  Kyriakos E. Zoiros,et al.  Design of ultrafast all-optical 4-bit parity generator and checker using quantum-dot semiconductor optical amplifier-based Mach-Zehnder interferometer , 2013 .

[22]  Vijay Janyani,et al.  Design of 2x2 Optoelectronic Switch Based on MZI and Study the Effect of Electrode Switching Voltages , 2008 .

[23]  M. Klowden.  Chapter 12 – Communication Systems , 2013 .

[24]  Tanay Chattopadhyay,et al.  Design of micro-ring resonator based all-optical parity generator and checker circuit , 2013 .

[25]  Moustafa H. Aly,et al.  Performance Evaluation and Enhancement of 2×2 Ti: LiNbO 3 Mach Zehnder Interferometer Switch at 1.3 µm and 1.55 µm , 2012 .

[26]  Sisir Kumar Garai,et al.  An all-optical method of developing data communication system with error detection circuit , 2014 .

[27]  Ivan B. Djordjevic,et al.  Advanced schemes for all-optical computing, optical error correction, and optical signal processing , 2015, 2015 17th International Conference on Transparent Optical Networks (ICTON).

[28]  Angela Amphawan,et al.  Design of parity generator and checker circuit using electro-optic effect of Mach–Zehnder interferometers , 2016 .

[29]  J. N. Roy,et al.  Ultrafast All-Optical Half Adder Using Quantum-Dot Semiconductor Optical Amplifier-Based Mach-Zehnder Interferometer , 2012, Journal of Lightwave Technology.

[30]  HE Ixtroductiont,et al.  The Bell System Technical Journal , 2022 .

[31]  Maithem S. Jaber,et al.  Design Investigation of 2 × 2 Mach–Zehnder Optical Switch Based on a Metal–Polymer–Silicon Hybrid Plasmonic Waveguide , 2018, Fiber and Integrated Optics.

[32]  Michal Lipson,et al.  Nanophotonic lithium niobate electro-optic modulators. , 2017, Optics express.

[33]  J. Vukusic.  Optical Fiber Communications: Principles and Practice , 1986 .

[34]  Sourangshu Mukhopadhyay,et al.  All-optical method of developing parity generator and checker with polarization encoded light signal , 2012 .

[35]  J. Jaques,et al.  Study of all-optical XOR using Mach-Zehnder Interferometer and differential scheme , 2004, IEEE Journal of Quantum Electronics.

[36]  P. Winzer,et al.  Integrated lithium niobate electro-optic modulators operating at CMOS-compatible voltages , 2018, Nature.

[37]  Deepti Gill,et al.  Error Detection and Correction , 2014 .

[38]  Kyriakos E. Zoiros,et al.  Theoretical analysis and performance investigation of ultrafast all-optical Boolean XOR gate with semiconductor optical amplifier-assisted Sagnac interferometer , 2006 .

[39]  Sandeep Sharma,et al.  Optical 1’s and 2’s complement devices using lithium-niobate-based waveguide , 2016 .