Impact Loading Of Lightweight Structures

[1]  Reza Vaziri,et al.  Simulation of progressive damage development in braided composite tubes under axial compression , 2007 .

[2]  Rodney S. Thomson,et al.  Low-velocity impacts on preloaded GFRP specimens with various impactor shapes , 2006 .

[3]  Alessandro Airoldi,et al.  Modelling of impact forces and pressures in Lagrangian bird strike analyses , 2006 .

[4]  Shaw Voon Wong,et al.  An experimental study of deformation behaviour of motorcycle front wheel-tyre assembly under frontal impact loading , 2006 .

[5]  Magnus Langseth,et al.  Modeling of textured aluminum alloys used in a bumper system: Material tests and characterization , 2006 .

[6]  M. Worswick,et al.  High rate constitutive modeling of aluminium alloy tube , 2006 .

[7]  J. Degrieck,et al.  Experimental and numerical study of the response of steel sheet Hopkinson specimens , 2006 .

[8]  Marion Merklein,et al.  Investigation of the thermo-mechanical properties of hot stamping steels , 2006 .

[9]  T. A. Mason,et al.  An experimental and numerical study of the localization behavior of tantalum and stainless steel , 2006 .

[10]  Tore Børvik,et al.  Dynamic strain aging and related instabilities : experimental, theoretical and numerical aspects , 2006 .

[11]  Gregory Haugou,et al.  On the use of the non direct tensile loading on a classical split Hopkinson bar apparatus dedicated to sheet metal specimen characterisation , 2006 .

[12]  Philippe Viot,et al.  Polymeric foam behavior under dynamic compressive loading , 2005 .

[13]  Rade Vignjevic,et al.  Coupling between meshless and finite element methods , 2005 .

[14]  Michael J. King,et al.  A continuum constitutive model for the mechanical behavior of woven fabrics including slip and failure , 2005 .

[15]  P. Hein,et al.  A Global Approach of the Finite Element Simulation of Hot Stamping , 2005 .

[16]  Frédéric Barlat,et al.  Linear transfomation-based anisotropic yield functions , 2005 .

[17]  Ted Belytschko,et al.  Cracking particles: a simplified meshfree method for arbitrary evolving cracks , 2004 .

[18]  Alain Combescure,et al.  Non-linear and failure behaviour of spotwelds: a “global” finite element and experiments in pure and mixed modes I/II , 2004 .

[19]  Ala Tabiei,et al.  Loosely woven fabric model with viscoelastic crimped fibres for ballistic impact simulations , 2004 .

[20]  Bohong Gu,et al.  Ballistic Penetration of Conically Cylindrical Steel Projectile into Plain-woven Fabric Target – A Finite Element Simulation , 2004 .

[21]  Zhenyu Xue,et al.  A comparative study of impulse-resistant metal sandwich plates , 2004 .

[22]  I. H. Marshall,et al.  The response of composite structures with pre-stress subject to low velocity impact damage , 2004 .

[23]  H. Dell,et al.  A comprehensive failure model for crashworthiness simulation of aluminium extrusions , 2004 .

[24]  O. Hopperstad,et al.  Experimental investigations on the behaviour of short to long square aluminium tubes subjected to axial loading , 2004 .

[25]  S. Dey,et al.  The effect of target strength on the perforation of steel plates using three different projectile nose shapes , 2004 .

[26]  Stephen M. Walley,et al.  Review of experimental techniques for high rate deformation and shock studies , 2004 .

[27]  C. Soares,et al.  Effect of laminate thickness and of matrix resin on the impact of low fibre-volume, woven roving E-glass composites , 2004 .

[28]  Shaik Jeelani,et al.  Performance of stitched/unstitched woven carbon/epoxy composites under high velocity impact loading , 2004 .

[29]  Magnus Langseth,et al.  Perforation of AA5083-H116 aluminium plates with conical-nose steel projectiles—experimental study , 2004 .

[30]  Ahmed Benallal,et al.  Flow and fracture characteristics of aluminium alloy AA5083–H116 as function of strain rate, temperature and triaxiality , 2004 .

[31]  Alain Combescure,et al.  A finite element to simulate the failure of weld points on impact , 2003 .

[32]  T. Bogetti,et al.  Ballistic impact into fabric and compliant composite laminates , 2003 .

[33]  Alastair Johnson,et al.  Modelling Soft Body Impact on Composite Structures , 2003 .

[34]  Y. Bréchet,et al.  Uniaxial tensile elastic properties of a regular stacking of brazed hollow spheres , 2003 .

[35]  L. Gibson,et al.  Mechanics of hollow sphere foams , 2003 .

[36]  Jilin Yu,et al.  Influence of specimen geometry on adiabatic shear instability of tungsten heavy alloys , 2003 .

[37]  Milan Jirásek,et al.  Nonlocal integral formulations of plasticity and damage : Survey of progress , 2002 .

[38]  W. Goldsmith,et al.  Momentum exchange alteration in projectile/target impact , 2002 .

[39]  Vincent B. C. Tan,et al.  Perforation of high-strength double-ply fabric system by varying shaped projectiles , 2002 .

[40]  M. Langseth,et al.  Close-range blast loading of aluminium foam panels , 2002 .

[41]  David L. McDowell,et al.  Behavior of a random hollow sphere metal foam , 2002 .

[42]  O van Schoor,et al.  Mechanical failures as a contributing cause to motor vehicle accidents South Africa. , 2001, Accident; analysis and prevention.

[43]  T. Børvik,et al.  A computational model of viscoplasticity and ductile damage for impact and penetration , 2001 .

[44]  Shu Ching Quek,et al.  The crushing response of braided and CSM glass reinforced composite tubes , 2001 .

[45]  S. R. Chen,et al.  The mechanical threshold stress constitutive-strength model description of HY-100 steel , 2000 .

[46]  Dahsin Liu,et al.  Impact perforation resistance of laminated and assembled composite plates , 2000 .

[47]  J. Swegle,et al.  Conservation of Momentum and Tensile Instability in Particle Methods , 2000 .

[48]  O. Hopperstad,et al.  Static and dynamic crushing of square aluminium extrusions with aluminium foam filler , 2000 .

[49]  Simona Socrate,et al.  Constitutive model for the finite deformation stress–strain behavior of poly(ethylene terephthalate) above the glass transition , 2000 .

[50]  Reza Vaziri,et al.  An efficient method for continuous measurement of projectile motion in ballistic impact experiments , 2000 .

[51]  Valentina Lopresto,et al.  Influence of material thickness on the response of carbon-fabric/epoxy panels to low velocity impact , 1999 .

[52]  P Vacher,et al.  Bidimensional strain measurement using digital images , 1999 .

[53]  G.A.O. Davies,et al.  Impact damage with compressive preload and post-impact compression of carbon composite plates , 1999 .

[54]  Milan Jirásek,et al.  Nonlocal models for damage and fracture: Comparison of approaches , 1998 .

[55]  T. L. Warren,et al.  Effects of strain hardening and strain-rate sensitivity on the penetration of aluminum targets with spherical-nosed rods , 1998 .

[56]  Vistasp M. Karbhari,et al.  Rate and architecture effects on progressive crush of braided tubes , 1998 .

[57]  Serge Abrate,et al.  Impact on Composite Structures: Frontmatter , 1998 .

[58]  Jaroslav Mackerle,et al.  BIBLIOGRAPHY: Rubber and rubber-like materials, finite-element analyses and simulations: a bibliography (1976-1997) , 1998 .

[59]  Han Zhao.  A constitutive model for metals over a large range of strain rates : Identification for mild-steel and aluminium sheets , 1997 .

[60]  C. Ong,et al.  Low velocity impact behavior of prestressed composite laminates , 1997 .

[61]  O. Hopperstad,et al.  Static and dynamic axial crushing of square thin-walled aluminium extrusions , 1996 .

[62]  J. Klepaczko.  Stress Concentrators and Rate Effects in Formation of Adiabatic Shear Bands (Revised Version). , 1995 .

[63]  J. M. Lifshitz,et al.  Instrumented low-velocity impact of CFRP beams , 1995 .

[64]  Whirley.  DYNA3D: A nonlinear, explicit, three-dimensional finite element code for solid and structural mechanics , 1993 .

[65]  Jean Lemaitre,et al.  A Course on Damage Mechanics , 1992 .

[66]  G. L. Farley,et al.  Crushing Characteristics of Continuous Fiber-Reinforced Composite Tubes , 1992 .

[67]  Norman Jones,et al.  Dynamic and Static Axial Crushing of Axially Stiffened Square Tubes , 1990 .

[68]  P. McCormick.  Theory of flow localisation due to dynamic strain ageing , 1988 .

[69]  C. Sun,et al.  On the Impact of Initially Stressed Composite Laminates , 1985 .

[70]  U. F. Kocks,et al.  THE MECHANICAL THRESHOLD OF DYNAMICALLY DEFORMED COPPER AND NITRONIC 40 , 1985 .

[71]  Willis Mock,et al.  Fragmentation behavior of Armco iron and HF‐1 steel explosive‐filled cylinders , 1983 .

[72]  P. H. Thornton,et al.  Energy Absorption in Composite Tubes , 1982 .

[73]  James L. Rand,et al.  The Development of a Substitute Bird Model , 1981 .

[74]  Z. Hashin,et al.  A method to produce uniform plane-stress states with applications to fiber-reinforced materials , 1978 .

[75]  Norman Jones,et al.  A theoretical study of the dynamic plastic behavior of beams and plates with finite-deflections , 1971 .

[76]  Egidio Rizzi,et al.  On the Portevin–Le Chatelier effect: theoretical modeling and numerical results , 2004 .

[77]  Eric Markiewicz,et al.  Material behaviour law identification for the various zones of the spot-weld under quasi-static loadings , 2001 .

[78]  J. R. Klepaczko,et al.  Shear testing of a sheet steel at wide range of strain rates and a constitutive relation with strain-rate and temperature dependence of the flow stress , 2001 .

[79]  Chwee Teck Lim,et al.  Dynamic mechanical properties of fabric armour , 2001 .

[80]  S. Silling.  Reformulation of Elasticity Theory for Discontinuities and Long-Range Forces , 2000 .

[81]  Stephen R. Hallett,et al.  Three-point beam impact tests on T300/914 carbon-fibre composites , 2000 .

[82]  D. Delfosse,et al.  Non-Penetrating Impact Behavior of CFRP at Low and Intermediate Velocities , 1995 .

[83]  D. Hull,et al.  A unified approach to progressive crushing of fibre-reinforced composite tubes , 1991 .

[84]  J. R. Klepaczko,et al.  Dynamic Crack Initiation, Some Experimental Methods and Modelling , 1990 .

[85]  J. R. Klepaczko,et al.  Crack dynamics in metallic materials , 1990 .

[86]  U. F. Kocks,et al.  A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable , 1988 .

[87]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .

[88]  G. R. Johnson,et al.  Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures , 1985 .

[89]  John A. Williams,et al.  The use of a shear instability criterion to predict local necking in sheet metal deformation , 1983 .

[90]  N. M. Belyayev.  CHAPTER 1 – TENSION AND COMPRESSION , 1966 .

[91]  W. Weibull.  A Statistical Distribution Function of Wide Applicability , 1951 .

[92]  Eugen Reichel,et al.  1. A - C , 1909 .