An improved dynamic model of spur gear transmission considering coupling effect between gear neighboring teeth

[1]  Kaiyun Wang,et al.  Improved analytical calculation model of spur gear mesh excitations with tooth profile deviations , 2020 .

[2]  Yifan Li,et al.  Vibration characteristics of railway locomotive induced by gear tooth root crack fault under transient conditions , 2020 .

[3]  Hanjun Jiang,et al.  Nonlinear dynamics of a spur gear pair with force-dependent mesh stiffness , 2020 .

[4]  Kang Huang,et al.  Nonlinear dynamic modelling and analysis for a spur gear system with time-varying pressure angle and gear backlash , 2019, Mechanical Systems and Signal Processing.

[5]  B. Wen,et al.  Calculation of mesh stiffness of spur gears considering complex foundation types and crack propagation paths , 2019, Mechanical Systems and Signal Processing.

[6]  Cai-chao Zhu,et al.  Investigation on the influence of work holding equipment errors on contact characteristics of face-hobbed hypoid gear , 2019, Mechanism and Machine Theory.

[7]  Jie Zhang,et al.  Nonlinear characteristics of a multi-degree-of-freedom spur gear system with bending-torsional coupling vibration , 2019, Mechanical Systems and Signal Processing.

[8]  Wanming Zhai,et al.  Establishment and validation of a locomotive–track coupled spatial dynamics model considering dynamic effect of gear transmissions , 2019, Mechanical Systems and Signal Processing.

[9]  Wanming Zhai,et al.  Vibration feature evolution of locomotive with tooth root crack propagation of gear transmission system , 2019, Mechanical Systems and Signal Processing.

[10]  Anand Parey,et al.  Experimental measurement of mesh stiffness by laser displacement sensor technique , 2018, Measurement.

[11]  Xinghui Han,et al.  Improved analytical models for mesh stiffness and load sharing ratio of spur gears considering structure coupling effect , 2018, Mechanical Systems and Signal Processing.

[12]  Xinghui Han,et al.  Analytical formulas for gear body-induced tooth deflections of spur gears considering structure coupling effect , 2018, International Journal of Mechanical Sciences.

[13]  Ming J. Zuo,et al.  Dynamic modeling of gearbox faults: A review , 2018 .

[14]  Jie Zhang,et al.  Improved analytical methods for calculation of gear tooth fillet-foundation stiffness with tooth root crack , 2017 .

[15]  Wanming Zhai,et al.  Dynamic investigation of a locomotive with effect of gear transmissions under tractive conditions , 2017 .

[16]  Robert G. Parker,et al.  Gear tooth mesh stiffness: A comparison of calculation approaches , 2016 .

[17]  Fengshou Gu,et al.  Frictional effects on the dynamic responses of gear systems and the diagnostics of tooth breakages , 2016 .

[18]  Leonie Moench,et al.  Some Basic Problems Of The Mathematical Theory Of Elasticity , 2016 .

[19]  Hui Ma,et al.  Improved time-varying mesh stiffness model of cracked spur gears , 2015 .

[20]  Omar D. Mohammed,et al.  Dynamic modelling of a one-stage spur gear system and vibration-based tooth crack detection analysis , 2015 .

[21]  Hui Ma,et al.  Fault features analysis of cracked gear considering the effects of the extended tooth contact , 2015 .

[22]  Hui Ma,et al.  Time-varying mesh stiffness calculation of cracked spur gears , 2014 .

[23]  Ming J. Zuo,et al.  Analytically evaluating the influence of crack on the mesh stiffness of a planetary gear set , 2014 .

[24]  Ramon Sancibrian,et al.  Gear transmission dynamic: Effects of tooth profile deviations and support flexibility , 2014 .

[25]  Anand Parey,et al.  Experimental investigation of spur gear tooth mesh stiffness in the presence of crack using photoelasticity technique , 2013 .

[26]  Omar D. Mohammed,et al.  Improving mesh stiffness calculation of cracked gears for the purpose of vibration-based fault analysis , 2013 .

[27]  Zaigang Chen,et al.  Mesh stiffness calculation of a spur gear pair with tooth profile modification and tooth root crack , 2013 .

[28]  Xiangyang Xu,et al.  Spur Gear Lubrication Analysis with Dynamic Loads , 2013 .

[29]  Teik C. Lim,et al.  Non-linear dynamic simulation of gear response under the idling condition , 2012 .

[30]  R. Subburaj Ramasamy,et al.  Calculation of the Combined Torsional Mesh Stiffness of Spur Gears with Two- and Three- Dimensional Parametrical FE Models , 2012 .

[31]  Yimin Shao,et al.  Dynamic simulation of spur gear with tooth root crack propagating along tooth width and crack depth , 2011 .

[32]  Ian Howard,et al.  Calculation of the Combined Torsional Mesh Stiffness of Spur Gears with Two- and Three-Dimensional Parametrical FE Models , 2011 .

[33]  Sheng Li,et al.  A spur gear mesh interface damping model based on elastohydrodynamic contact behaviour , 2011 .

[34]  Teik C. Lim,et al.  Dynamic analysis of spiral bevel geared rotor systems applying finite elements and enhanced lumped parameters , 2011 .

[35]  Fakher Chaari,et al.  Analytical modelling of spur gear tooth crack and influence on gearmesh stiffness , 2009 .

[36]  Ming J. Zuo,et al.  Simulation of spur gear dynamics and estimation of fault growth , 2008 .

[37]  Sandeep M. Vijayakar,et al.  A study of the relationship between the dynamic factors and the dynamic transmission error of spur gear pairs , 2007 .

[38]  P. Velex,et al.  A model for simulating the quasi-static and dynamic behaviour of solid wide-faced spur and helical gears , 2005 .

[39]  Philippe Velex,et al.  Contribution of Gear Body to Tooth Deflections—A New Bidimensional Analytical Formula , 2004 .

[40]  Ian Howard,et al.  The Dynamic Modeling of Multiple Pairs of Spur Gears in Mesh, Including Friction and Geometrical Errors , 2003 .

[41]  Xianghe Peng,et al.  Survey of nonlinear vibration of gear transmission systems , 2003 .

[42]  Jiande Wang,et al.  Numerical and Experimental Analysis of Spur Gears in Mesh , 2003 .

[43]  Walter Bartelmus,et al.  MATHEMATICAL MODELLING AND COMPUTER SIMULATIONS AS AN AID TO GEARBOX DIAGNOSTICS , 2001 .

[44]  Robert G. Parker,et al.  NON-LINEAR DYNAMIC RESPONSE OF A SPUR GEAR PAIR: MODELLING AND EXPERIMENTAL COMPARISONS , 2000 .

[45]  Ahmet Kahraman,et al.  Effect of Involute Tip Relief on Dynamic Response of Spur Gear Pairs , 1999 .

[46]  J. Sabot,et al.  Non-Linear Vibrations of a SPHERE-PLANE Contact Excited by a Normal Load , 1998 .

[47]  Ahmet Kahraman,et al.  Experiments on Nonlinear Dynamic Behavior of an Oscillator With Clearance and Periodically Time-Varying Parameters , 1997 .

[48]  A. Kahraman,et al.  Steady state forced response of a mechanical oscillator with combined parametric excitation and clearance type non-linearity , 1995 .

[49]  Y. Cai,et al.  The Linear Approximated Equation of Vibration of a Pair of Spur Gears (Theory and Experiment) , 1994 .

[50]  Donald R. Houser,et al.  Mathematical models used in gear dynamics—A review , 1988 .

[51]  R. Cornell.  Compliance and Stress Sensitivity of Spur Gear Teeth , 1981 .

[52]  R. G. Munro,et al.  Dynamic Behaviour of Spur Gears , 1963 .

[53]  S. L. Harris,et al.  A method of measuring transmission error in spur gears of 1:1 ratio , 1963 .

[54]  S. L. Harris,et al.  Dynamic Loads on the Teeth of Spur Gears , 1958 .