Energy and cost analysis of semi-transparent photovoltaic in office buildings

Solar energy conversion systems and daylighting schemes are important building energy strategies to produce clean energy, reduce the peak electrical and cooling demands and save the building electricity expenditures. A semi-transparent photovoltaic (PV) is a building component generating electricity via PV modules and allowing daylight entering into the interior spaces to facilitate daylighting designs. This paper studies the thermal and visual properties, energy performance and financial issue of such solar facades. Data measurements including solar irradiance, daylight illuminance and output power for a semi-transparent PV panel were undertaken. Using the recorded results, essential parameters pertaining to the power generation, thermal and optical characteristics of the PV system were determined. Case studies based on a generic reference office building were conducted to elaborate the energy and cooling requirements, and the cost implications when the PV facades together with the daylight-linked lighting controls were being used. The findings showed that such an integrated system could produce electricity and cut down electric lighting and cooling energy requirements to benefit the environmental, energy and economic aspects.

[1]  Larry Chuen-ho Chow,et al.  Changes in fuel input of electricity sector in Hong Kong since 1982 and their implications , 2001 .

[2]  D. Loveday,et al.  Convective heat transfer coefficients at a plane surface on a full-scale building facade , 1996 .

[3]  G. N. Tiwari,et al.  Life cycle cost analysis of HPVT air collector under different Indian climatic conditions , 2008 .

[4]  Danny H.W. Li,et al.  An analysis of lighting energy savings and switching frequency for a daylit corridor under various indoor design illuminance levels , 2003 .

[5]  Paul J. Littlefair,et al.  The luminance distribution of an average sky , 1981 .

[6]  Refrigerating.  ASHRAE handbook of fundamentals , 1967 .

[7]  Takahiko Miyazaki,et al.  Energy savings of office buildings by the use of semi-transparent solar cells for windows , 2005 .

[8]  D H W Li,et al.  An analysis of building energy performances and benefits using solar façades , 2008 .

[9]  V I George,et al.  Robust control and optimisation of energy consumption in daylight—artificial light integrated schemes , 2008 .

[10]  D. G. Stephenson.  Equations for solar heat gain through windows , 1965 .

[11]  Moncef Krarti,et al.  Estimation of lighting energy savings from daylighting , 2009 .

[12]  Danny H.W. Li,et al.  A Study of Solar Radiation Daylight Illuminance and Sky Luminance Data Measurements for Hong Kong , 2002 .

[13]  Danny H.W. Li,et al.  Daylighting and its implications to overall thermal transfer value (OTTV) determinations , 2002 .

[14]  Tariq Muneer,et al.  Life cycle assessment of a medium-sized photovoltaic facility at a high latitude location , 2006 .

[15]  Danny H.W. Li,et al.  Lighting and energy performance for an office using high frequency dimming controls , 2006 .

[16]  M. Newborough,et al.  An approach for estimating the carbon emissions associated with office lighting with a daylight contribution , 2007 .

[17]  L. Chow.  A study of sectoral energy consumption in Hong Kong (1984–97) with special emphasis on the household sector , 2001 .

[18]  Magali Bodart,et al.  Lighting energy savings in offices using different control systems and their real consumption , 2008 .

[19]  Dierk Tille,et al.  Characterisation of photovoltaic generators , 2000 .

[20]  Minoru Mizuno,et al.  Semi-transparent PV: Thermal performance, power generation, daylight modelling and energy saving potential in a residential application , 2008 .

[21]  Jeffrey D. Spitler,et al.  The Radiant Time Series Cooling Load Calculation Procedure , 1997 .

[22]  L. Roche,et al.  Occupant reactions to daylight in offices , 2000 .

[23]  Danny H.W. Li,et al.  Predicting daylight illuminance on inclined surfaces using sky luminance data , 2004 .

[24]  M. A. Bader,et al.  Cost of solar energy generated using PV panels , 2007 .

[25]  Harsono Hadi,et al.  Evaluation of performance of photovoltaic system with maximum power point (MPP) , 2003 .

[26]  J. C. Lam,et al.  Solar heat gain factors and the implications to building designs in subtropical regions , 2000 .

[27]  D. Li,et al.  An analysis of luminous efficacies under the CIE standard skies , 2008 .

[28]  Danny H.W. Li,et al.  Electricity use characteristics of purpose-built office buildings in subtropical climates , 2004 .

[29]  Paul J. Littlefair,et al.  Lighting energy savings from daylight: Estimation at the sketch design stage , 1990 .

[30]  José L. Bernal-Agustín,et al.  Design of grid connected PV systems considering electrical, economical and environmental aspects: A practical case , 2006 .

[31]  Danny H.W. Li,et al.  Predicting solar irradiance on inclined surfaces using sky radiance data , 2004 .

[32]  Danny H.W. Li,et al.  Analysis of the operational performance and efficiency characteristic for photovoltaic system in Hong Kong , 2005 .

[33]  Sai On Cheung,et al.  An analysis of electricity end-use in air-conditioned office buildings in Hong Kong , 2003 .

[34]  Paul J. Littlefair,et al.  Predicting lighting energy use under daylight linked lighting controls , 1998 .

[35]  Danny H.W. Li,et al.  Daylighting and its effects on peak load determination , 2005 .

[36]  S. E. Selkowitz,et al.  Impact Assessment and Performance Targets for Lighting and Envelope Systems , 1992 .

[37]  Danny H.W. Li,et al.  An analysis of daylighting performance for office buildings in Hong Kong , 2008 .