High performance, flexible polymer light-emitting diodes (PLEDs) with gravure contact printed hole injection and light emitting layers

Abstract The ultimate approach to organic semiconductor device fabrication is expected to be via high-speed, large area, roll-to-roll (R2R) printing. Gravure contact printing is one of the highest volume potential techniques, operating at speeds of over 35 m/min. Here we report high performance, flexible polymer light-emitting diodes (PLEDs) with gravure contact printed hole injection and emissive layers. We are able to successfully print highly uniform layers of optimum thickness of poly (3,4-ethylene dioxythiophene): poly (styrene sulfonate) (PEDOT:PSS) and the light emitting polymer (LEP) LUMATION™ Green 1300. All the optimised formulations dry rapidly and evenly without solute aggregation and are compatible with fast processing on plastic substrates. PLEDs with the gravure printed layers have an identical performance to conventional spin-coated devices on the same substrate, achieving, at a display brightness of 100 cd/m 2 , luminosity, efficiency and drive bias values of 5.4 lm/W, 5.2 cd/A and 3 V, respectively. The devices achieve a maximum luminosity of 8.8 lm/W and a maximum luminance of 66,000 cd/m 2 , comparable to the performance range found for conventionally fabricated state-of-the-art green-emitting flexible PLEDs.

[1]  Donal D. C. Bradley,et al.  Polymer Field‐Effect Transistors Fabricated by the Sequential Gravure Printing of Polythiophene, Two Insulator Layers, and a Metal Ink Gate , 2010 .

[2]  Ping Chen,et al.  Effects of poly(ethylene glycol) on electrical conductivity of poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonic acid) film , 2005 .

[3]  J. Lumley,et al.  Fluid Dynamics for Physicists , 1996 .

[4]  F. So,et al.  Effects of solution-processed polymer interlayers on hole injection and device performance of polymer light-emitting diodes , 2008 .

[5]  Arto Maaninen,et al.  Gravure printed organic light emitting diodes for lighting applications , 2009 .

[6]  M. Doi,et al.  Simple model of skin formation caused by solvent evaporation in polymer solutions. , 2006, Physical review letters.

[7]  J. Fukai,et al.  Film formation from polymer solution using inkjet printing method , 2007 .

[8]  N D Robinson,et al.  Organic materials for printed electronics. , 2007, Nature materials.

[9]  Franky So,et al.  Bipolar charge transport, injection, and trapping studies in a model green-emitting polyfluorene copolymer , 2005 .

[10]  S. Chandrasekhar.  Hydrodynamic and Hydromagnetic Stability , 1961 .

[11]  H. Sirringhaus,et al.  High-Resolution Ink-Jet Printing of All-Polymer Transistor Circuits , 2000, Science.

[12]  Ronald Österbacka,et al.  Low‐Voltage Organic Transistors Fabricated Using Reverse Gravure Coating on Prepatterned Substrates , 2008 .

[13]  Jun Long Lim,et al.  Self‐Organization of Ink‐jet‐Printed Triisopropylsilylethynyl Pentacene via Evaporation‐Induced Flows in a Drying Droplet , 2008 .

[14]  H. Sirringhaus.  Solid-state physics: Electrons in the fast lane , 2009, Nature.

[15]  M. Doi,et al.  Piling-to-buckling transition in the drying process of polymer solution drop on substrate having a large contact angle. , 2006, Physical review. E, Statistical, nonlinear, and soft matter physics.

[16]  U. Schubert,et al.  Inkjet Printing of Polymers: State of the Art and Future Developments , 2004 .

[17]  T. Dupont,et al.  Capillary flow as the cause of ring stains from dried liquid drops , 1997, Nature.

[18]  W. R. Salaneck,et al.  Electroluminescence in conjugated polymers , 1999, Nature.

[19]  J. Huang,et al.  Investigation of the Effects of Doping and Post‐Deposition Treatments on the Conductivity, Morphology, and Work Function of Poly(3,4‐ethylenedioxythiophene)/Poly(styrene sulfonate) Films , 2005 .

[20]  C. Allain,et al.  Experimental characterization of buoyancy- and surface tension-driven convection during the drying of a polymer solution , 2008 .

[21]  D. Gundlach,et al.  Organic electronics. Low power, high impact. , 2007, Nature materials.

[22]  H W Li,et al.  Dewetting of conducting polymer inkjet droplets on patterned surfaces , 2004, Nature materials.

[23]  Jooho Moon,et al.  Control of colloidal particle deposit patterns within picoliter droplets ejected by ink-jet printing. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[24]  D. Bradley,et al.  High efficiency organic light-emitting diodes with PEDOT-based conducting polymer anodes , 2008 .

[25]  M. Aegerter,et al.  Direct gravure printing of indium tin oxide nanoparticle patterns on polymer foils , 2008 .

[26]  R. Larson,et al.  Analysis of the effects of Marangoni stresses on the microflow in an evaporating sessile droplet. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[27]  Stephen R. Forrest,et al.  The path to ubiquitous and low-cost organic electronic appliances on plastic , 2004, Nature.

[28]  Jerzy Kanicki,et al.  Optoelectronic properties of poly(fluorene) co‐polymer light‐emitting devices on a plastic substrate * , 2005 .

[29]  A. Marmur,et al.  Marangoni effects in the spreading of liquid mixtures on a solid , 1987 .