Composition and energy value research of pyrolise gases

Energy values of gaseous pyrolysis products of typical forest and aquatic plant biomass of Europe are investigated. Theoretical research of main characteristics of samples of typical plant biomass of Europe such as pine, thorn, microcystis, elodea is produced. Methodology and planning of experimental studies of process of pyrolysis of plant biomass are formulated. Experimental researches of composition of gas pyrolysis products of different types of plant biomass for different temperatures were carried according to laboratory conditions. Pyrolysis of plant biomass was carried out using a specially designed and manufactured pyrolysis plant the main part of which is a pyrolysis reactor. Installation made by our department is intended for slow pyrolysis. In research for determine presence and percentage of product yield qualitative and quantitative gas chromatography assays were used. The lower calorific value of gaseous pyrolysis products of samples of typical forest and aquatic plant biomass of Ukraine are calculated. As a result of calculations it was determined that during pyrolysis of aquatic plants and algae mixture of the obtained gases had the highest values of lower calorific value: 17,10-17,15 MJ/kg – for microcystis and 16,45-16,50 MJ/kg – for elodea. Gas obtained from pyrolysis of pine wood had the highest values of lower calorific value in the range of 13,8 to 13,85 MJ/kg. The lower calorific value of pyrogas obtained from thorn samples ranged from 12,6 MJ/kg to12,65 MJ/kg.

[1]  R. Smigins,et al.  Impact of Diethyl Ether/Rapeseed Oil Blends on Performance and Emissions of a Light-Duty Diesel Vehicle , 2020, Energies.

[2]  O. Ivanov,et al.  Improvement of Abrasion Resistance of Production Equipment Wear Parts by Hardfacing with Flux-Cored Wires Containing Boron Carbide/Metal Powder Reaction Mixtures , 2020 .

[3]  S. Kryshtopa,et al.  Determining the characteristics for the rational adjusting of an fuel-air mixture composition in a two-stroke engine with internal carburation , 2020 .

[4]  S. Kryshtopa,et al.  Determining the Characteristics for the Rational Adjusting of an Fuel-Air Mixture Composition in a Two-Stroke Engine With Internal Mixture Formation , 2020 .

[5]  N. M. Marchuk,et al.  Research of a Truck Train Movement when Driving Semitrailer by Slowdowning of Wheels of One Axis Pin on the Model , 2020, International Journal of Automotive and Mechanical Engineering.

[6]  S. Boichenko,et al.  Improvement of Air Transport Environmental Safety by Implementing Alternative Jet Fuels , 2019, 2019 Modern Safety Technologies in Transportation (MOSATT).

[7]  A. Sładkowski,et al.  Effi ciency of Production of Motor Biofuels for Water and Land Transport , 2019, Naše more.

[8]  V. Aulin,et al.  Exploring a possibility to control the stressed­strained state of cylinder liners in diesel engines by the tribotechnology of alignment , 2019, Eastern-European Journal of Enterprise Technologies.

[9]  Alfredas Rimkus,et al.  Research of performance and emission indicators of the compression-ignition engine powered by hydrogen - Diesel mixtures , 2019, International Journal of Hydrogen Energy.

[10]  V. Aulin,et al.  Studying truck transmission oils using the method of thermal-oxidative stability during vehicle operation , 2019, Eastern-European Journal of Enterprise Technologies.

[11]  N. Koval,et al.  Backgrounds for Improving Resource Management of Agricultural Enterprises Based on Economic Diagnostics of Biofuel Consumption , 2019, The Journal of Social Sciences Research.

[12]  Aleksandr Dykha,et al.  Substantiation of diagnostic parameters for determining the technical condition of transmission assemblies in trucks , 2018 .

[13]  R. Smigins.  Ecological impact of CNG/gasoline bi-fuelled vehicles , 2017 .

[14]  Oleksandr Blintsov,et al.  Development of the mathematical modeling method for dynamics of the flexible tether as an element of the underwater complex , 2017 .

[15]  Vasyl Mateichyk,et al.  The Evaluation of Vehicle Fuel Consumption and Harmful Emission Using the Heating System in a Driving Cycle , 2017 .

[16]  Владимир Анатольевич Корогодский,et al.  Dependence of the coefficients of residual gases on the type of mixture formation and the shape of a combustion chamber , 2016 .

[17]  S. Boichenko,et al.  Energy Efficient Renewable Feedstock for Alternative Motor Fuels Production: Solutions for Ukraine , 2020 .

[18]  Alfredas Rimkus,et al.  Alternative Carbonless Fuels for Internal Combustion Engines of Vehicles , 2020 .

[19]  A. Sładkowski,et al.  PERSPECTIVES FOR DEVELOPING AND USING THE TORREFACTION TECHNOLOGY IN UKRAINE , 2019, International Journal of Energy for a Clean Environment.

[20]  E. Zelenin,et al.  PURIFICATION OF A FLUE GAS FROM SOLID PARTICLES AND ACIDIC IMPURITIES , 2019, International Journal of Energy for a Clean Environment.

[21]  Inesa Khvostina,et al.  Emergent Properties Manifestation in the Risk Assessment of Oil and Gas Companies , 2019, M3E2-MLPEED.

[22]  V. Tsyganov,et al.  The Methodological Principles of the Engineering of Tribocoupling Details Surface under Multicomponent Loading , 2018 .

[23]  O. Vovk,et al.  Case Study of Alternative Jet Fuel Production with Bio-additives from Plant Oils in Ukraine and Poland , 2018 .

[24]  S. Kryshtopa,et al.  Experimental research on diesel engine working on a mixture of diesel fuel and fusel oils , 2017 .

[25]  K. Górski,et al.  IMPACT OF ETHER/ETHANOL AND BIODIESEL BLENDS ON COMBUSTION PROCESS OF COMPRESSION IGNITION ENGINE , 2011 .