Numerical analysis of the dynamic flame response of a spray flame for aero-engine applications

Incoming standards on NO x emissions are motivating many aero-engine manufacturers to adopt the lean burn combustion concept. One of the most critical issues affecting this kind of technology is the occurrence of thermo-acoustic instabilities that may compromise combustor life and integrity. Therefore the prediction of the thermo-acoustic behaviour of the system becomes of primary importance. In this paper, the complex interaction between the system acoustics and a turbulent spray flame for aero-engine applications is numerically studied. The dynamic flame response is computed exploiting reactive URANS simulations and system identification techniques. Great attention has been devoted to the impact of liquid fuel evolution and droplet dynamics. For this purpose, the GE Avio PERM (partially evaporating and rapid mixing) lean injection system has been analysed, focussing attention on the effect of several modelling parameters on the combustion and on the predicted flame response. A frequency analysis has also been set up and exploited to obtain even more insight on the dynamic flame response of the spray flame. The application is one of the few in the literature where the dynamic flame response of spray flames is numerically investigated, providing a description in terms of flame transfer function and detailed information on the physical phenomena.

[1]  Antonio Andreini,et al.  Multi-Coupled Numerical Analysis of Advanced Lean Burn Injection Systems , 2014 .

[2]  C. Lawn,et al.  On the low-frequency limit of flame transfer functions , 2007 .

[3]  Alexander J. De Rosa,et al.  Flame Area Fluctuation Measurements in Velocity-Forced Premixed Gas Turbine Flames , 2015 .

[4]  Thierry Schuller,et al.  Experimental Determination of Flame Transfer Function Using Random Velocity Perturbations , 2011 .

[5]  Thomas Sattelmayer,et al.  Forced Low-Frequency Spray Characteristics of a Generic Airblast Swirl Diffusion Burner , 2003 .

[6]  Camilo F. Silva,et al.  A GREY-BOX IDENTIFICATION APPROACH FOR THERMOACOUSTIC NETWORK MODELS , 2014 .

[7]  William A. Sirignano,et al.  Droplet vaporization model for spray combustion calculations , 1988 .

[8]  Antonio Andreini,et al.  Impact of Swirl Flow on Combustor Liner Heat Transfer and Cooling: A Numerical Investigation With Hybrid Reynolds-Averaged Navier–Stokes Large Eddy Simulation Models , 2016 .

[9]  A. G. Doige,et al.  Theory of a two source-location method for direct experimental evaluation of the four-pole parameters of an aeroacoustic element , 1990 .

[10]  D. Joseph,et al.  Breakup of a liquid drop suddenly exposed to a high-speed airstream , 1999 .

[11]  M. Rachner,et al.  Die Stoffeigenschaften von Kerosin Jet A-1 , 1998 .

[12]  Kenneth J. Wilson,et al.  Liquid-fueled active instability suppression , 1998 .

[13]  Thomas Sattelmayer,et al.  Low-Order Modeling of Low-Frequency Combustion Instabilities in AeroEngines , 2006 .

[14]  Wolfgang Polifke,et al.  Novel perspectives on the dynamics of premixed flames , 2013 .

[15]  W. Polifke,et al.  Identification of Flame Transfer Functions From LES of a Premixed Swirl Burner , 2010 .

[16]  Antonio Andreini,et al.  Experimental Investigation of the Flow Field and the Heat Transfer on a Scaled Cooled Combustor Liner With Realistic Swirling Flow Generated by a Lean-Burn Injection System , 2014 .

[17]  A. Gosman,et al.  Aspects of Computer Simulation of Liquid-Fueled Combustors , 1983 .

[18]  Tim Lieuwen,et al.  Combustion Instabilities In Gas Turbine Engines: Operational Experience, Fundamental Mechanisms, and Modeling , 2006 .

[19]  A. F. Mills,et al.  Droplet evaporation: Effects of transients and variable properties☆ , 1975 .

[20]  Ann P. Dowling,et al.  Transfer Function Calculations for Aeroengine Combustion Oscillations , 2005 .

[21]  Fabio Turrini,et al.  Characteristics of an Ultra-Lean Swirl Combustor Flow by LES and Comparison to Measurements , 2011 .

[22]  William A. Sirignano,et al.  Oscillatory vaporization of fuel droplets in an unstable combustor , 1989 .

[23]  B. Facchini,et al.  Thermoacoustic Analysis of a Full Annular Aero-engine Lean Combustor with Multi-perforated Liners , 2013 .

[24]  Wolfgang Polifke,et al.  Impact of Swirl Fluctuations on the Flame Response of a Perfectly Premixed Swirl Burner , 2010 .

[25]  Ann P. Dowling,et al.  Investigations on the self-excited oscillations in a kerosene spray flame , 2009 .

[26]  Antonio Andreini,et al.  Thermoacoustic Analysis of a Full Annular Lean Burn Aero-Engine Combustor , 2013 .

[27]  Antonio Andreini,et al.  Numerical Analysis of the Dynamic Flame Response and Thermo-Acoustic Stability of a Full-Annular Lean Partially-Premixed Combustor , 2016 .

[28]  Bruno Schuermans,et al.  Design for Thermo-Acoustic Stability: Procedure and Database , 2013 .

[29]  A Andrea Donini,et al.  The implementation of five-dimensional FGM combustion model for the simulation of a gas turbine model combustor , 2015 .

[30]  Antonio Andreini,et al.  Numerical Identification of a Premixed Flame Transfer Function and Stability Analysis of a Lean Burn Combustor , 2015 .

[31]  Wolfgang Polifke,et al.  Dynamics of Practical Premixed Flames, Part II: Identification and Interpretation of CFD Data , 2009 .

[32]  Thierry Poinsot,et al.  LES evaluation of the effects of equivalence ratio fluctuations on the dynamic flame response in a real gas turbine combustion chamber , 2013 .

[33]  Wolfgang Polifke,et al.  Dynamics of Practical Premixed Flames, Part I: Model Structure and Identification , 2009 .

[34]  Bruno Facchini,et al.  Assessment of Flame Transfer Function Formulations for the Thermoacoustic Analysis of Lean Burn Aero-Engine Combustors , 2014 .

[35]  S. Sazhin.  Advanced models of fuel droplet heating and evaporation , 2006 .

[36]  Yang Yang,et al.  Numerical Analysis of the Dynamic Flame Response in Alstom Reheat Combustion Systems , 2015 .

[37]  Antonio Andreini,et al.  Experimental Investigation of the Flow Field and the Heat Transfer on a Scaled Cooled Combustor Liner With Realistic Swirling Flow Generated by a Lean-Burn Injection System , 2015 .

[38]  C. H. Chiang,et al.  Oscillatory fuel droplet vaporization - Driving mechanism for combustion instability , 1996 .

[39]  Jannis Gikadi,et al.  Prediction of Acoustic Modes in Combustors using Linearized Navier-Stokes Equations in Frequency Space , 2014 .

[40]  Wolfgang Polifke,et al.  Comparative Validation Study on Identification of Premixed Flame Transfer Function , 2012 .

[41]  Alexander J. De Rosa,et al.  The Effect of Confinement on the Structure and Dynamic Response of Lean-Premixed, Swirl-Stabilized Flames , 2015 .

[42]  S. A. Morsi,et al.  An investigation of particle trajectories in two-phase flow systems , 1972, Journal of Fluid Mechanics.