Controlled‐source electromagnetic monitoring of reservoir oil saturation using a novel borehole‐to‐surface configuration

To advance and optimize secondary and tertiary oil recovery techniques, it is essential to know the areal propagation and distribution of the injected fluids in the subsurface. We investigate the applicability of controlled-source electromagnetic methods to monitor fluid movements in a German oilfield (Bockstedt, onshore Northwest Germany) as injected brines (highly saline formation water) have much lower electrical resistivity than the oil within the reservoir. The main focus of this study is on controlled-source electromagnetic simulations to test the sensitivity of various source–receiver configurations. The background model for the simulations is based on two-dimensional inversion of magnetotelluric data gathered across the oil field and calibrated with resistivity logs. Three-dimensional modelling results suggest that controlled-source electromagnetic methods are sensitive to resistivity changes at reservoir depths, but the effect is difficult to resolve with surface measurements only. Resolution increases significantly if sensors or transmitters can be placed in observation wells closer to the reservoir. In particular, observation of the vertical electric field component in shallow boreholes and/or use of source configurations consisting of combinations of vertical and horizontal dipoles are promising. Preliminary results from a borehole-to-surface controlled-source electromagnetic field survey carried out in spring 2014 are in good agreement with the modelling studies.

[1]  H. Bibby,et al.  The magnetotelluric phase tensor , 2004 .

[2]  E. Plein,et al.  Evolution of the Lower Saxony Basin , 1987 .

[3]  Chester J. Weiss,et al.  Mapping thin resistors and hydrocarbons with marine EM methods, Part II -Modeling and analysis in 3D , 2006 .

[4]  M. Becken,et al.  An ellipticity criterion in magnetotelluric tensor analysis , 2004 .

[5]  L. MacGregor,et al.  Using CSEM to monitor production from a complex 3D gas reservoir—A synthetic case study , 2011 .

[6]  Doddy Sutarno,et al.  Phase-smoothed robust M-estimation of magnetotelluric impedance functions , 1991 .

[7]  Zhanxiang He,et al.  First Pilot of Borehole to Surface Electromagnetic in Saudi Arabia - A New Technology to Enhance Reservoir Mapping & Monitoring , 2011 .

[8]  Rita Streich,et al.  Electromagnetic fields generated by finite‐length wire sources: comparison with point dipole solutions , 2011 .

[9]  Rita Streich,et al.  Imaging of CO2 storage sites, geothermal reservoirs, and gas shales using controlled-source magnetotellurics: Modeling studies , 2010 .

[10]  J. Rocroi,et al.  The use of vertical line sources in electrical prospecting for hydrocarbon , 1985 .

[11]  Ute Weckmann,et al.  Effective noise separation for magnetotelluric single site data processing using a frequency domain selection scheme , 2005 .

[12]  G. M. Hoversten,et al.  Reservoir characterization using crosswell electromagnetic inversion: A feasibility study for the Snorre field, North Sea , 2001 .

[13]  S. Constable.  Ten years of marine CSEM for hydrocarbon exploration , 2010 .

[14]  Alex Marcuello,et al.  Feasibility of Monitoring the Hontomín (Burgos, Spain) CO2 Storage Site Using a Deep EM Source , 2013, Surveys in Geophysics.

[15]  C. Torres‐Verdín,et al.  1D subsurface electromagnetic fields excited by energized steel casing , 2009 .

[16]  Oliver Ritter,et al.  New equipment and processing for magnetotelluric remote reference observations , 1998 .

[17]  H. F. Morrison,et al.  Advances in Electromagnetic Survey Instrumentation and the Use of a Cased Borehole for Imaging a Deep Formations , 2014 .

[18]  P. A. Ziegler,et al.  Late Cretaceous and Cenozoic intra-plate compressional deformations in the Alpine foreland—a geodynamic model , 1987 .

[19]  Marion Jegen,et al.  The marine controlled source electromagnetic response of a steel borehole casing: applications for the NEPTUNE Canada gas hydrate observatory , 2013 .

[20]  Kerry Key,et al.  The feasibility of reservoir monitoring using time-lapse marine CSEM , 2009 .

[21]  H. F. Morrison,et al.  Crosswell electromagnetic tomography: System design considerations and field results , 1995 .

[22]  Douglas W. Oldenburg,et al.  Three dimensional inversion of multisource time domain electromagnetic data , 2013 .

[23]  Trond Mannseth,et al.  Sensitivity study of marine CSEM data for reservoir production monitoring , 2008 .

[24]  Michael S. Zhdanov,et al.  Electromagnetic monitoring of CO2 sequestration in deep reservoirs , 2013 .

[25]  Bruce Hobbs,et al.  Hydrocarbon detection and monitoring with a multicomponent transient electromagnetic (MTEM) survey , 2002 .

[26]  M. Landrø,et al.  3D CSEM modeling and time-lapse sensitivity analysis for subsurface CO2 storage , 2012 .

[27]  Zhanxiang He,et al.  Mapping reservoir boundary by borehole-surface TFEM Two case studies , 2005 .

[28]  Rita Streich,et al.  Robust processing of noisy land-based controlled-source electromagnetic data , 2013 .

[29]  William Rodi,et al.  Nonlinear conjugate gradients algorithm for 2-D magnetotelluric inversion , 2001 .

[30]  Evert Slob,et al.  A feasibility study of land CSEM reservoir monitoring in a complex 3-D model , 2010 .

[31]  Jérémy Rohmer,et al.  Time-lapse CSEM monitoring of the Ketzin (Germany) CO2 injection using 2×MAM configuration , 2011 .

[32]  Rita Streich,et al.  3D finite-difference frequency-domain modeling of controlled-source electromagnetic data: Direct solution and optimization for high accuracy , 2009 .

[33]  Alexander V. Grayver,et al.  3D inversion and resolution analysis of land-based CSEM data from the Ketzin CO2 storage formation , 2014 .