In situ and wide range quantification of hydrogen sulfide in industrial gases by means of photoacoustic spectroscopy

This paper describes a photoacoustic spectroscopy-based detector of hydrogen sulfide (H2S) in biogas, natural gas and oil process technology. The instrument is capable of measuring H2S concentrations over four orders of magnitude (from a few ppm level up to several per cent) in changing gas mixtures. Problems caused by harsh industrial circumstances, contamination and widely varying composition of gases can be overcome by optimizing wavelength modulation, resonance frequency tracking and an easy-to-use method enabling in situ monitoring calibration. A diode laser emitting around 1.57 µm served as the excitation source; at this wavelength spectral overlap between H2S and CO2 is substantial. Spectral interference was eliminated by optimizing the amplitude of wavelength modulation; furthermore, a simplified calibration method was implemented taking advantage of a nearby absorption line of CO2 providing fast and economical measurements. Frequency dependence of the photoacoustic signal was determined by two methods to ensure accuracy. For 10 s integration time and 6800 Hz modulation frequency, the minimum detectable concentration was 6 ppm (3σ).

[1]  Zoltán Bozóki,et al.  Photoacoustic Instruments for Practical Applications: Present, Potentials, and Future Challenges , 2011 .

[2]  A. Tam.  Applications of photoacoustic sensing techniques , 1986 .

[3]  Zoltán Bozóki,et al.  A compact ammonia detector with sub-ppb accuracy using near-infrared photoacoustic spectroscopy and preconcentration sampling. , 2009, Environmental science & technology.

[4]  Tawee Tanbun-Ek,et al.  H2S and CO2 gas sensing using DFB laser diodes emitting at 1.57 μm , 1995 .

[5]  Christoph Haisch,et al.  Photoacoustic spectroscopy for analytical measurements , 2011 .

[6]  Vincenzo Spagnolo,et al.  Photoacoustic Techniques for Trace Gas Sensing Based on Semiconductor Laser Sources , 2009, Sensors.

[7]  Zoltán Bozóki,et al.  Photoacoustic system for on-line process monitoring of hydrogen sulfide (H2S) concentration in natural gas streams , 2006 .

[8]  Frank K. Tittel,et al.  H2S trace concentration measurements using off-axis integrated cavity output spectroscopy in the near-infrared , 2008 .

[9]  Massimo Inguscio,et al.  Detection of H2S at the ppm level using a telecommunication diode laser , 1998 .

[10]  Z. Bozóki,et al.  Combination of a photoacoustic detector with a diffusion sampler for the measurement of water vapor concentration in ethylene glycols for the natural gas industry , 2006 .

[11]  R. Niessner,et al.  Process analysis of biofilms by photoacoustic spectroscopy , 2003, Analytical and bioanalytical chemistry.

[12]  Thomas Schmid,et al.  Photoacoustic spectroscopy for process analysis , 2006, Analytical and bioanalytical chemistry.

[13]  Frank K. Tittel,et al.  QEPAS for chemical analysis of multi-component gas mixtures , 2010 .

[14]  Markus W. Sigrist,et al.  Trace gas monitoring by laser-photoacoustic spectroscopy , 1995 .

[15]  Z. Bozóki,et al.  Multi-component photoacoustic gas analyzer for industrial applications , 2010 .

[16]  A. Miklós,et al.  Application of acoustic resonators in photoacoustic trace gas analysis and metrology , 2001 .

[17]  S. Schilt,et al.  Multi-hydrogenated compounds monitoring in optical fibre manufacturing process by photoacoustic spectroscopy , 2006 .

[18]  Karen Willcox,et al.  Kinetics and kinematics for translational motions in microgravity during parabolic flight. , 2009, Aviation, space, and environmental medicine.

[19]  Gang Li,et al.  The HITRAN 2008 molecular spectroscopic database , 2005 .

[20]  P. Kaspersen,et al.  Gas monitoring in the process industry using diode laser spectroscopy , 1998 .

[21]  S C Burgess,et al.  Multi-modal locomotion: from animal to application , 2013, Bioinspiration & biomimetics.