Simulation of polarization converter formed by poling-induced polymer waveguides

A polarization converter using electrooptic (EO) polymer waveguides is proposed and it is simulated by a full vectorial beam propagation method (VBPM) for anisotropic medium. First, an efficient structure of poling electrodes is proposed for the fabrication of TE-mode poling-induced waveguides in EO polymer. For given electrode structures of both TE-mode and TM-mode waveguides, poling-induced dielectric tensors are calculated by the finite-element method to provide refractive index distribution, data for VBPM simulation. It is shown numerically that the poled TE and TM mode waveguides work efficiently as the corresponding polarization filters. Then, new poling electrodes are suggested to fabricate a waveguide device formed by connecting the TE and TM mode waveguides adiabatically with a slowly varying structure. This waveguide device has the optic axis slowly rotating as one moves along the propagation direction, so that it will act as polarization converter. VBPM simulation shows that the polarization of the guided mode rotates following the optic axis distribution. Polarization conversion is demonstrated successfully with high conversion efficiency and low excess loss. >

[1]  J. Chrostowski,et al.  A full-vectorial beam propagation method for anisotropic waveguides , 1994 .

[2]  Paul R. Ashley,et al.  Multilevel registered polymeric MachZehnder intensity modulator array , 1993 .

[3]  Barton A. Smith,et al.  Electro-optic coefficients in electric-field-poled polymer waveguides , 1991 .

[4]  G. Hugh Song.  Transparent boundary conditions for beam-propagation analysis from the Green’s function method , 1993 .

[5]  G. R. Hadley,et al.  Transparent boundary condition for the beam propagation method , 1992 .

[6]  M. Oron,et al.  Polarization rotation in asymmetric periodic loaded rib waveguides , 1991, Integrated Photonics Research.

[7]  Hiroshi Nishihara,et al.  Integrated-optic focal-spot intensity modulator using electrooptic polymer waveguide , 1994 .

[8]  G. F. Lipscomb,et al.  Complementary optical tap fabricated in an electro‐optic polymer waveguide , 1991 .

[9]  Jin-Jei Wu,et al.  Birefringent and electro-optic effects in poled polymer films: steady-state and transient properties , 1991 .

[10]  Paul R. Ashley,et al.  Channel waveguides in electro‐optic polymers using a photopolymer cladding technique , 1991 .

[11]  D. Yevick.  Improved Field Propagation Techniques , 1995 .

[12]  Youngchul Chung,et al.  Analysis of Z-invariant and Z-variant semiconductor rib waveguides by explicit finite difference beam propagation method with nonuniform mesh configuration , 1991 .

[13]  G. F. Lipscomb,et al.  Poled electro‐optic waveguide formation in thin‐film organic media , 1988 .

[14]  David Yevick,et al.  Beam-propagation analysis of loss in bent optical waveguides and fibers , 1983 .

[15]  David Yevick,et al.  New formulations of the matrix beam propagation method: application to rib waveguides , 1989 .

[16]  N. Dagli,et al.  Explicit finite difference vectorial beam propagation method , 1991 .

[17]  C. C. Teng,et al.  Traveling-wave polymeric optical intensity modulator with more than 40 GHz of 3-dB electrical bandwidth , 1992 .