Study of Highly Sensitive Formaldehyde Sensors Based on ZnO/CuO Heterostructure via the Sol-Gel Method

Formaldehyde (HCHO) gas sensors with high performance based on the ZnO/CuO heterostructure (ZC) were designed, and the sensing mechanism was explored. FTIR results show that more OH− and N–H groups appeared on the surface of ZC with an increase in Cu content. XPS results show that ZC has more free oxygen radicals (O*) on its surface compared with ZnO, which will react with more absorbed HCHO molecules to form CO2, H2O and, electrons, accelerating the oxidation-reduction reaction to enhance the sensitivity of the ZC sensor. Furthermore, electrons move from ZnO to CuO in the ZC heterostructure due to the higher Fermi level of ZnO, and holes move from CuO to ZnO until the Fermi level reaches an equilibrium, which means the ZC heterostructure facilitates more free electrons existing on the surface of ZC. Sensing tests show that ZC has a low detection limit (0.079 ppm), a fast response/recovery time (1.78/2.90 s), and excellent selectivity and sensitivity for HCHO detection at room temperature. In addition, ambient humidity has little effect on the ZC gas sensor. All results indicate that the performance of the ZnO sensor for HCHO detection can be improved effectively by ZC heterojunction.

[1]  B. Ding,et al.  Nanofibrous polyethyleneimine membranes as sensitive coatings for quartz crystal microbalance-based formaldehyde sensors , 2010 .

[2]  T. Shaheen,et al.  Optimization of green biosynthesized visible light active CuO/ZnO nano-photocatalysts for the degradation of organic methylene blue dye , 2020, Heliyon.

[3]  T. Hsueh,et al.  A transparent ZnO nanowire MEMS gas sensor prepared by an ITO micro-heater , 2020 .

[4]  Rui Zhang,et al.  Cabbage-shaped zinc-cobalt oxide (ZnCo2O4) sensing materials: Effects of zinc ion substitution and enhanced formaldehyde sensing properties. , 2019, Journal of colloid and interface science.

[5]  Q. Xue,et al.  UV assisted ppb-level acetone detection based on hollow ZnO/MoS2 nanosheets core/shell heterostructures at low temperature , 2020 .

[6]  Jilin Xu,et al.  Coexistence of ferromagnetism and paramagnetism in ZnO/CuO nanocomposites , 2019, Chemical Physics Letters.

[7]  Fengmin Liu,et al.  The role of Ce doping in enhancing sensing performance of ZnO-based gas sensor by adjusting the proportion of oxygen species , 2018, Sensors and Actuators B: Chemical.

[8]  H. Duan,et al.  Mechanical, electromagnetic shielding and gas sensing properties of flexible cotton fiber/polyaniline composites , 2020 .

[9]  Murthy Chavali,et al.  Performance evaluation of ZnO–CuO hetero junction solid state room temperature ethanol sensor , 2012 .

[10]  Fanli Meng,et al.  P-n junctions based on CuO-decorated ZnO nanowires for ethanol sensing application , 2021 .

[11]  Xueguang Wang,et al.  Direct synthesis and catalytic applications of ordered large pore aminopropyl-functionalized SBA-15 mesoporous materials. , 2005, The journal of physical chemistry. B.

[12]  P. Xu,et al.  Carboxyl functionalized gold nanoparticles in situ grown on reduced graphene oxide for micro-gravimetric ammonia sensing , 2014 .

[13]  Weigen Chen,et al.  Highly sensitive and selective acetylene sensors based on p-n heterojunction of NiO nanoparticles on flower-like ZnO structures , 2019, Ceramics International.

[14]  Kijung Yong,et al.  CuO/ZnO Heterostructured Nanorods: Photochemical Synthesis and the Mechanism of H2S Gas Sensing , 2012 .

[15]  Luyu Wang,et al.  PODS-covered PDA film based formaldehyde sensor for avoiding humidity false response , 2018 .

[16]  A. K. Tyagi,et al.  Rapid synthesis and characterization of hybrid ZnO@Au core-shell nanorods for high performance, low temperature NO 2 gas sensor applications , 2015 .

[17]  Jun Zhang,et al.  Morphological evolution, luminescence properties and a high-sensitivity ethanol gas sensor based on 3D flower-like MoS2–ZnO micro/nanosphere arrays , 2020 .

[18]  Pengfei Zhou,et al.  Room-temperature NO2 sensing properties and mechanism of CuO nanorods with Au functionalization , 2021 .

[19]  Xiaogan Li,et al.  Room temperature impedance spectroscopy-based sensing of formaldehyde with porous TiO2 under UV illumination , 2013 .

[20]  O. Terasaki,et al.  Synthesis and Characterization of the Amphoteric Amino Acid Bifunctional Mesoporous Silica , 2007 .

[21]  F. Taghipour,et al.  Development of highly sensitive ZnO/In2O3 composite gas sensor activated by UV-LED , 2017 .

[22]  Jiaguo Yu,et al.  Triethylamine gas sensor based on Pt-functionalized hierarchical ZnO microspheres , 2021 .

[23]  Shuyi Ma,et al.  Synthesis of SnO2–ZnO heterostructured nanofibers for enhanced ethanol gas-sensing performance , 2015 .

[24]  R. Mariammal,et al.  Study on gas sensing mechanism in p-CuO/n-ZnO heterojunction sensor , 2018 .

[25]  D. Sherrington,et al.  Well-Defined Mesostructured Organic−Inorganic Hybrid Materials via Atom Transfer Radical Grafting of Oligomethacrylates onto SBA-15 Pore Surfaces , 2008 .

[26]  G. Lu,et al.  One step synthesis of branched SnO2/ZnO heterostructures and their enhanced gas-sensing properties , 2019, Sensors and Actuators B: Chemical.

[27]  E. Xie,et al.  Binder-free CuO nanoneedle arrays based tube-type sensor for H2S gas sensing , 2021 .

[28]  M. Osada,et al.  Hydrogen sensing characteristics of Pd-decorated ultrathin ZnO nanosheets , 2020 .

[29]  Yahong Xie,et al.  Synthesis of the 0D/3D CuO/ZnO Heterojunction with Enhanced Photocatalytic Activity , 2018 .

[30]  Yang Lu,et al.  Metal–organic framework-derived ZnO/ZnCo2O4 microspheres modified by catalytic PdO nanoparticles for sub-ppm-level formaldehyde detection , 2020 .

[31]  Yan Chen,et al.  Design and evaluation of Cu-modified ZnO microspheres as a high performance formaldehyde sensor based on density functional theory , 2020 .

[32]  Sung‐Yool Choi,et al.  ZnO-CuO Core-Hollow Cube Nanostructures for Highly Sensitive Acetone Gas Sensors at a ppb Level. , 2020, ACS applied materials & interfaces.

[33]  Xinxin Xing,et al.  Formaldehyde detection: SnO2 microspheres for formaldehyde gas sensor with high sensitivity, fast response/recovery and good selectivity , 2017 .

[34]  Xinghua Li,et al.  Composition-controllable p-CuO/n-ZnO hollow nanofibers for high-performance H2S detection , 2019, Sensors and Actuators B: Chemical.

[35]  Jun Zhang,et al.  Hydrogen Adsorption of Mg-Doped Graphene Oxide: A First-Principles Study , 2013 .

[36]  On the mechanism of gas adsorption for pristine, defective and functionalized graphene. , 2016, Physical chemistry chemical physics : PCCP.

[37]  S. Thongmee,et al.  High performance Cr doped ZnO by UV for NH3 gas sensor , 2020 .

[38]  Kardelen Ecevit,et al.  High-performance formaldehyde adsorption on CuO/ZnO composite nanofiber coated QCM sensors , 2019, Journal of Alloys and Compounds.

[39]  Chao Zhang,et al.  Deposition and microstructure characterization of atmospheric plasma-sprayed ZnO coatings for NO2 detection , 2010 .

[40]  S. S. Kim,et al.  Toluene- and benzene-selective gas sensors based on Pt- and Pd-functionalized ZnO nanowires in self-heating mode , 2019, Sensors and Actuators B: Chemical.

[41]  Xian-fa Zhang,et al.  A fast response/recovery ppb-level H2S gas sensor based on porous CuO/ZnO heterostructural tubule via confined effect of absorbent cotton , 2019, Sensors and Actuators B: Chemical.

[42]  J. Xiong,et al.  Ultra-fast and highly selective room-temperature formaldehyde gas sensing of Pt-decorated MoO3 nanobelts , 2019, Journal of Alloys and Compounds.

[43]  Z. Yamani,et al.  UV-activated gold decorated rGO/ZnO heterostructured nanocomposite sensor for efficient room temperature H2 detection , 2019, Sensors and Actuators B: Chemical.

[44]  S. Navale,et al.  Ethanol sensing behavior of Pd-nanoparticles decorated ZnO-nanorod based chemiresistive gas sensors , 2019, Sensors and Actuators B: Chemical.

[45]  Wooyoung Lee,et al.  Highly selective detection of dimethyl methylphosphonate (DMMP) using CuO nanoparticles /ZnO flowers heterojunction , 2017 .

[46]  A. Pourjavadi,et al.  Tuning Composition of Electrospun ZnO/CuO Nanofibers: Toward Controllable and Efficient Solar Photocatalytic Degradation of Organic Pollutants , 2017 .

[47]  Tao Wang,et al.  Fabrication of heterostructured p-CuO/n-SnO2 core-shell nanowires for enhanced sensitive and selective formaldehyde detection , 2019, Sensors and Actuators B: Chemical.

[48]  S. Zeinali,et al.  Formaldehyde detection using quartz crystal microbalance (QCM) nanosensor coated by nanoporous MIL-101(Cr) film , 2020 .

[49]  R. Zhang,et al.  Highly sensitive formaldehyde gas sensors based on Ag doped Zn2SnO4/SnO2 hollow nanospheres , 2019, Materials Letters.

[50]  Luyu Wang,et al.  High performance formaldehyde detection based on a novel copper (II) complex functionalized QCM gas sensor , 2017 .