Novel sensing materials for harsh environment subsurface pH sensing applications

Robust pH sensors that can operate under harsh environmental conditions are valuable for a variety of applications, such as oil and gas production, geological CO2 sequestration, etc. However, despite the significant advance in pH measurement technology, reliable pH sensing at elevated pressures (up to 30,000 psi) and high temperatures (up to 350 °C) remains challenging. We describe an optical pH sensor based on optical fiber technology. A sensing layer that is comprised of metal nanoparticles incorporated in a silica matrix coated on an optical fiber exhibits strong and reversible optical response to pH variation at 80 °C and in solutions with different salt concentrations. The same robust response is also observed at elevated pressures up to 2,000 psi. The optical fiber pH sensor is made of materials with high stability at temperatures at least up to ~ 600 °C. Therefore, this approach provides a new potential means to enable optical pH sensing for extreme environment applications.

[1]  O. Wolfbeis,et al.  Fluorescent pH-sensitive nanoparticles in an agarose matrix for imaging of bacterial growth and metabolism. , 2013, Angewandte Chemie.

[2]  H. G. Drickamer,et al.  The effect of pressure on the surface plasmon absorption spectra of colloidal gold and silver particles , 1990 .

[3]  J H Grassi,et al.  Temperature-Dependent Refractive Index Determination from Critical Angle Measurements:  Implications for Quantitative SPR Sensing. , 1999, Analytical chemistry.

[4]  J. Gallagher,et al.  Refractive index of water and steam as function of wavelength, temperature and density , 1990 .

[5]  R. Bates.  Revised standard values for pH measurements from 0 to 95 °C , 1962 .

[6]  C. Weir,et al.  Effect of Hydrostatic Pressure on the Refractive Indices of Some Solids. , 1965, Journal of research of the National Bureau of Standards. Section A, Physics and chemistry.

[7]  R. Byrne,et al.  In-situ spectrophotometric pH measurements: the effect of pressure on thymol blue protonation and absorbance characteristics , 2000 .

[8]  R. Bates.  Revised Standard Values for pH Measurements from 0 to 95 °C , 1962, Journal of Research of the National Bureau of Standards. Section A, Physics and Chemistry.

[9]  Daniel Werner,et al.  Methodological Improvement in Pulsed Laser-Induced Size Reduction of Aqueous Colloidal Gold Nanoparticles by Applying High Pressure , 2012 .

[10]  Bhavani Raghuraman,et al.  Spectroscopic pH measurement for high temperatures, pressures and ionic strength , 2006 .

[11]  O. Korostynska,et al.  Review Paper: Materials and Techniques for In Vivo pH Monitoring , 2008, IEEE Sensors Journal.

[12]  D. Bortoluzzi,et al.  Pressure-induced pH changes in aqueous solutions – On-line measurement and semi-empirical modelling approach , 2011 .

[13]  Christopher Matranga,et al.  Plasmonic nanocomposite thin film enabled fiber optic sensors for simultaneous gas and temperature sensing at extreme temperatures. , 2013, Nanoscale.

[14]  David N. Reinhoudt,et al.  Design of Fluorescent Materials for Chemical Sensing , 2007 .

[15]  W. Worek,et al.  Two-wavelength interferometric technique for measuring the refractive index of salt-water solutions. , 1993, Applied optics.

[16]  A. Dickson.  The measurement of sea water pH , 1993 .

[17]  Congjun Wang,et al.  Novel silica surface charge density mediated control of the optical properties of embedded optically active materials and its application for fiber optic pH sensing at elevated temperatures. , 2015, Nanoscale.

[18]  O. Wolfbeis.  Fiber-optic chemical sensors and biosensors. , 2002, Analytical chemistry.

[19]  R Woolley,et al.  Intracellular pH-sensing using core/shell silica nanoparticles. , 2014, Journal of biomedical nanotechnology.

[20]  J. Rayss,et al.  Ion adsorption in the porous sol–gel silica layer in the fibre optic pH sensor , 2002 .

[21]  Mira Josowicz,et al.  Composites of intrinsically conducting polymers as sensing nanomaterials. , 2008, Chemical reviews.