Fuel injector deposits in direct-injection spark-ignition engines

[1]  Oar,et al.  Final Rule: Revision to the Requirements on Variability in the Composition of Additives Certified Under the Gasoline Deposit Control Program , 2015 .

[2]  Gautam Kalghatgi,et al.  Fuel/Engine Interactions , 2013 .

[3]  Silvana Di Iorio,et al.  Characterization of Ethanol Blends Combustion Processes and Soot Formation in a GDI Optical Engine , 2013 .

[4]  Axel H. Berndorfer,et al.  Diffusion Combustion Phenomena in GDi Engines caused by Injection Process , 2013 .

[5]  Jill M. Cummings,et al.  Cellulosic Ethanol Fuel Quality Evaluation and its Effects on PFI Intake Valve Deposits and GDI Fuel Injector Plugging Performance , 2013 .

[6]  Sergio Leal Braga,et al.  Fuel Sulfate Content Influence in the Formation of Inorganics Components Deposits in the Engine Injectors with Technologies of Gasoline Direct Injection , 2012 .

[7]  William J. Imoehl,et al.  A DOE Approach to Engine Deposit Testing used to Optimize the Design of a Gasoline Direct Injector Seat and Orifice , 2012 .

[8]  Alessandro Ferrari,et al.  Diesel Injector Coking: Optical-Chemical Analysis of Deposits and Influence on Injected Flow-Rate, Fuel Spray and Engine Performance , 2012 .

[9]  Joachim Melbert,et al.  Dosing Performance of Piezo Injectors and Sensorless Closed-Loop Controlled Solenoid Injectors for Gasoline Direct Injection , 2012 .

[10]  R. Cracknell,et al.  Understanding the Effect of DISI Injector Deposits on Vehicle Performance , 2012 .

[11]  Matthew A. Ratcliff,et al.  Effects of Gasoline Direct Injection Engine Operating Parameters on Particle Number Emissions , 2012 .

[12]  Gequn Shu,et al.  A review of experimental studies on deposits in the combustion chambers of internal combustion engines , 2012 .

[13]  Hai-Ping Lin,et al.  Spray characteristics of emulsified castor biodiesel on engine emissions and deposit formation , 2011 .

[14]  B. Vaglieco,et al.  Particle Size Distributions from a DI High Performance SI Engine Fuelled with Gasoline-Ethanol Blended Fuels , 2011 .

[15]  Nebojsa Milovanovic,et al.  Internal Fuel Injector Deposits , 2011 .

[16]  W. R. Biggs,et al.  Direct Injection Spark Ignition Engine Deposit Analysis: Combustion Chamber and Intake Valve Deposits , 2011 .

[17]  J. Rodríguez-Fernández,et al.  Characterization of the Diesel Soot Oxidation Process through an Optimized Thermogravimetric Method , 2011 .

[18]  Gerald A. Szekely,et al.  A Comparison of Spray-Guided Stratified-Charge Combustion Performance with Outwardly-Opening Piezo and Multi-Hole Solenoid Injectors , 2011 .

[19]  Guohong Tian,et al.  Effect of spark timing and load on a DISI engine fuelled with 2,5-dimethylfuran , 2011 .

[20]  C. Arcoumanis,et al.  Spray stability of outwards opening pintle injectors for stratified direct injection spark ignition engine operation , 2010 .

[21]  Tiaan Rabe,et al.  Characterisation of Combustion Chamber Deposits Formed in Direct Injection Spark Ignition (DISI) E , 2010 .

[22]  Reinhold Kneer,et al.  Experimental Investigation of Fuel Influence on Atomization and Spray Propagation Using an Outwardly Opening GDI-Injector , 2010 .

[23]  P. Aleiferis,et al.  Effect of fuel temperature on in-nozzle cavitation and spray formation of liquid hydrocarbons and alcohols from a real-size optical injector for direct-injection spark-ignition engines , 2010 .

[24]  Paul Richards,et al.  A Novel Technique for Investigating the Nature and Origins of Deposits Formed in High Pressure Fuel Injection Equipment , 2009 .

[25]  Timothy J. Cushing,et al.  Test and Control of Fuel Injector Deposits in Direct Injected Spark Ignition Vehicles , 2009 .

[26]  Jay K. Sofianek,et al.  Engine Test for Accelerated Fuel Deposit Formation on Injectors Used in Gasoline Direct Injection Engines , 2009 .

[27]  Graham Balfour,et al.  Investigation into the Formation and Prevention of Internal Diesel Injector Deposits , 2008 .

[28]  J. Galante-Fox,et al.  Controlling Induction System Deposits in Flexible Fuel Vehicles Operating on E85 , 2007 .

[29]  Yukihiro Tsukasaki,et al.  Feasibility Study of Ethanol Applications to A Direct Injection Gasoline Engine , 2007 .

[30]  Hamid Pezeshk,et al.  The influence of deposit control additives on exhaust CO and HC emissions from gasoline engines (case study: Tehran) , 2007 .

[31]  M. Gavaises,et al.  Cavitation in Fuel Injection Systems for Spray-Guided Direct Injection Gasoline Engines , 2007 .

[32]  C. Shimizu,et al.  Parametric Analysis of Catalytic Converter Plugging Caused by Manganese-Based Gasoline Additives , 2007 .

[33]  M. Lapuerta,et al.  Thermogravimetric analysis of diesel particulate matter , 2007 .

[34]  Joseph W. Roos,et al.  A Survey of American and Canadian Consumer Experience - The Performance of Late Model Year Vehicles Operating on Gasoline With and Without the Gasoline Fuel Additive MMT® , 2006 .

[35]  Zoran Filipi,et al.  Characterizing the Effect of Combustion Chamber Deposits on a Gasoline HCCI Engine , 2006 .

[36]  Hideaki Katashiba,et al.  Improvement of Center Injection Spray Guided DISI Performance , 2006 .

[37]  Julie M. Galante-Fox,et al.  Development of a Robust Injector Design for Superior Deposit Resistance , 2005 .

[38]  Ulrich Spicher,et al.  A Study of the In-Nozzle Flow Characteristic of Valve Covered Orifice Nozzles for Gasoline Direct Injection , 2005 .

[39]  R. Tatschl,et al.  Integrated Cavitating Injector Flow and Spray Propagation Simulation in DI Gasoline Engine , 2005 .

[40]  W. P. Boone,et al.  Effect of MMT® Fuel Additive on Emission System Components: Detailed Parts Analysis from Clear- and MMT®-Fueled Escort Vehicles from the Alliance Study , 2005 .

[41]  Mikael Skogsberg,et al.  Effects of injector parameters on mixture formation for multi-hole nozzles in a spray-guided gasoline di engine , 2005 .

[42]  Choongsik Bae,et al.  The Effects of Injector Temperature on Spray and Combustion Characteristics in a Single Cylinder DISI Engine , 2005 .

[43]  O. Altin,et al.  CARBON DEPOSIT FORMATION FROM THERMAL STRESSING OF PETROLEUM FUELS , 2004 .

[44]  Gang Guo,et al.  Effects of MMT® Fuel Additive on Emission System Components: Comparison of Clear- and MMT®-fueled Escort Vehicles from the Alliance Study , 2004 .

[45]  J. Rivere,et al.  Development of a Direct Injection Spark Ignition Engine Test for Injector Fouling , 2003 .

[46]  I. Denbratt,et al.  The Influence of Injector Deposits on Mixture Formation in a DISC SI Engine , 2003 .

[47]  K. T. Miller,et al.  Direct Injection Gasoline (DIG) Injector Deposit Control with Additives , 2003 .

[48]  F. Owrang,et al.  Characterization of combustion chamber deposits from a gasoline direct injection SI engine , 2003 .

[49]  Gautam Kalghatgi,et al.  Combustion Chamber Deposit Flaking Studies Using a Road Test Procedure , 2002 .

[50]  T. Nishida,et al.  A study of Injector deposits, Combustion chamber Deposits (CCD) and Intake Valve Deposits (IVD) in direct injection spark ignition (DISI) engines II , 2002 .

[51]  Tsuyoshi Ashida,et al.  Effects of Fuel Properties on SIDI Fuel Injector Deposit , 2001 .

[52]  J. R. Mills,et al.  The Effect of Fuel Composition and Additive Content on Injector Deposits and Performance of an Air-Assisted Direct Injection Spark Ignition (DISI) Research Engine , 2001 .

[53]  I. Denbratt,et al.  Influence of Fuel Parameters on Deposit Formation and Emissions in a Direct Injection Stratified Charge SI Engine , 2001 .

[54]  Mark Brogan,et al.  A New Approach to Meeting Future European Emissions Standards with the Orbital Direct Injection Gasoline Engine , 2000 .

[55]  G. Kalghatgi,et al.  Combustion Chamber Deposit Flaking , 2000 .

[56]  Malcolm G. J. Macduff,et al.  The Effect on Vehicle Performance of Injector Deposits in a Direct Injection Gasoline Engine , 2000 .

[57]  A. Aradi,et al.  A study of fuel additives for direct injection gasoline (DIG) injector deposit control , 2000 .

[58]  Simone Hochgreb,et al.  Effects of fuel volatility and operating conditions on fuel sprays in Disi engines: (1) imaging investigation , 2000 .

[59]  David L. Harrington,et al.  Automotive Spark-Ignited Direct-Injection Gasoline Engines , 2000 .

[60]  Akinori Saito,et al.  A Method for Suppressing Formation of Deposits on Fuel Injector for Direct Injection Gasoline Engine , 1999 .

[61]  David C. Arters,et al.  A Comparison of Gasoline Direct Injection Part I - Fuel System Deposits and Vehicle Performance , 1999 .

[62]  Elizabeth A. Schiferl,et al.  A Comparison of Gasoline Direct Injection and Port Fuel Injection Vehicles: Part II - Lubricant Oil Performance and Engine Wear , 1999 .

[63]  Vittorio Rocco,et al.  Experimental and Numerical Approach to Injection and Ignition Optimization of Lean GDI-Combustion Behavior , 1999 .

[64]  Nobuo Kurihara,et al.  Stability Improvement of Direct Fuel Injection Engine under Lean Combustion Operation , 1998 .

[65]  Janet P. Buckingham,et al.  The Port Fuel Injector Deposit Test - A Statistical Review , 1998 .

[66]  D. Kittelson.  Engines and nanoparticles: a review , 1998 .

[67]  S. Kampmann,et al.  GDI: Interaction Between Mixture Preparation, Combustion System and Injector Performance , 1998 .

[68]  Min Xu,et al.  CFD-Aided Development of Spray for an Outwardly Opening Direct Injection Gasoline Injector , 1998 .

[69]  Iida Kazumasa,et al.  OPTIMIZED GASOLINE DIRECT-INJECTION ENGINE FOR THE EUROPEAN MARKET , 1998 .

[70]  Kimitaka Saito,et al.  Analysis of Mixture Formation of Direct Injection Gasoline Engine , 1998 .

[71]  Yasunori Takei,et al.  STUDY ON COMBUSTION CHAMBER DEPOSIT FORMATION MECHANISM : INFLUENCE OF FUEL COMPONENTS AND GASOLINE DETERGENTS , 1997 .

[72]  Terutoshi Tomoda,et al.  Development of Direct Injection Gasoline Engine - Study of Stratified Mixture Formation , 1997 .

[73]  Hiroyuki Mizuno,et al.  Development of Direct Injection Gasoline Engine , 1997 .

[74]  David L. Harrington,et al.  A Review of Mixture Preparation and Combustion Control Strategies for Spark-Ignited Direct-Injection Gasoline Engines , 1997 .

[75]  Günter Karl Fraidl,et al.  Gasoline Direct Injection: Actual Trends and Future Strategies for Injection and Combustion Systems , 1996 .

[76]  Hiromitsu Ando,et al.  Combustion Control Technologies for Direct Injection SI Engine , 1996 .

[77]  Gautam Kalghatgi,et al.  Combustion Chamber Deposits in Spark-Ignition Engines: A Literature Review , 1995 .

[78]  Pedro Martín,et al.  Deposit Forming Tendency of Gasoline Polar Compounds , 1993 .

[79]  K. Reading,et al.  The Use of Concentration Response Maps to Study the Activity of a High-Performance Diesel Fuel Detergent , 1992 .

[80]  K. S. Virk,et al.  Use of Dispersants/Detergents in Diesel Injector Keep Clean and Clean Up Studies , 1991 .

[81]  Gautam Kalghatgi,et al.  Deposits in Gasoline Engines - A Literature Review , 1990 .

[82]  David L. Harrington,et al.  Deposit-Induced Fuel Flow Reduction in Multiport Fuel Injectors: An Experimental and Analytical Investigation , 1989 .

[83]  Charles B. Richardson,et al.  A Laboratory Test for Fuel Injector Deposit Studies , 1989 .

[84]  D. Hilden.  The Relationship of Gasoline Diolefin Content to Deposits in Multiport Fuel Injectors , 1988 .

[85]  S. Tseregounis,et al.  Deposit Formation on a Metal Surface in Oxidized Gasolines , 1987 .

[86]  R. C. Tupa.  Port Fuel Injectors-Causes/Consequences/Cures , 1987 .

[87]  Robert C. Tupa,et al.  Gasoline Port Fuel Injectors - Keep Glean/Clean Up With Additives , 1986 .

[88]  Brian Y. Taniguchi,et al.  Injector Deposits — The Tip of Intake System Deposit Problems , 1986 .

[89]  G. Hughmark,et al.  A Statistical Analysis of the Effect of MMT Concentration on Hydrocarbon Emissions , 1980 .

[90]  D. L. Lenane.  Effect of MMT on Emissions from Production Cars , 1978 .

[91]  A. P..  A Dictionary of Chemistry , 1869, Nature.

[92]  Jose Martin Herreros,et al.  University of Birmingham Impact of Fuel and Injection System on Particle Emissions from a GDI Engine , 2014 .

[93]  H. Kubach,et al.  Influence of Injection Pressures up to 300 bar on Particle Emissions in a GDI Engine , 2012 .

[94]  P. Price.  Direct injection gasoline engine particulate emissions , 2009 .

[95]  Hans-Erik Ångström,et al.  A Study of Hole Properties in Diesel Fuel Injection Nozzles and its Influence on Smoke Emissions , 2008 .

[96]  Elizabeth A. Schiferl,et al.  A comparison of gasoline direct-injection and port-fuel-injection vehicles: Part 1-Fuel system deposits and vehicle performance , 1999 .

[97]  New Approach. , 1953, California medicine.

[98]  H. Ricardo.  RECENT RESEARCH WORK ON THE INTERNAL-COMBUSTION ENGINE , 1922 .