Design of an interrupted-plate heat exchanger used in a liquid-piston compression chamber for compressed air energy storage

In the Compressed Air Energy Storage (CAES) approach, air is compressed to high pressure, stored, and expanded to output work when needed. The temperature of air tends to rise during compression, and the rise in the air internal energy is wasted during the later storage period as the compressed air cools back to ambient temperature.The present study focuses on designing an interrupted-plate heat exchanger used in a liquid-piston compression chamber for CAES. The exchanger features layers of thin plates stacked in an interrupted pattern. Twenty-seven exchangers featuring different combinations of shape parameters are analyzed. The exchangers are modeled as porous media. As such, for each exchanger shape, a Representative Elementary Volume (REV), which represents a unit cell of the exchanger, is developed. The flow through the REV is simulated with periodic velocity and thermal boundary conditions, using the commercial CFD software ANSYS FLUENT. Simulations of the REVs for the various exchangers characterize the various shape parameter effects on values of pressure drop and heat transfer coefficient between solid surfaces and fluid. For an experimental validation of the numerical solution, two different exchanger models made by rapid prototyping, are tested for pressure drop and heat transfer. Good agreement is found between numerical and experimental results. Nusselt number vs. Reynolds number relations are developed on the basis of pore size and on hydraulic diameter.To analyze performance of exchangers with different shapes, a simplified zero-dimensional thermodynamic model for the compression chamber with the inserted heat exchange elements is developed. This model, valuable for system optimization and control simulations, is a set of ordinary differential equations. They are solved numerically for each exchanger insert shape to determine the geometries of best compression efficiency.Copyright © 2013 by ASME

[1]  C. Rhie,et al.  Numerical Study of the Turbulent Flow Past an Airfoil with Trailing Edge Separation , 1983 .

[2]  K. Ichimiya.  A New Method for Evaluation of Heat Transfer Between Solid Material and Fluid in a Porous Medium , 1999 .

[3]  T. Simon,et al.  Modeling of unsteady and steady fluid flow, heat transfer and dispersion in porous media using unit cell scale , 2010 .

[4]  B. Launder,et al.  Lectures in mathematical models of turbulence , 1972 .

[5]  A. Nakayama,et al.  Heat and Fluid Flow Within an Anisotropic Porous Medium , 2002 .

[6]  Perry Y. Li,et al.  Heat Transfer in a Long, Thin Tube Section of an Air Compressor: An Empirical Correlation from CFD and a Thermodynamic Modeling , 2012 .

[7]  F. Dullien.  Porous Media: Fluid Transport and Pore Structure , 1979 .

[8]  Chin Tsau Hsu,et al.  Dynamic Modeling of Convective Heat Transfer in Porous Media , 2005 .

[9]  K. Kamiuto,et al.  Heat transfer correlations for open-cellular porous materials , 2005 .

[10]  Perry Y. Li,et al.  Modeling and control of a novel compressed air energy storage system for offshore wind turbine , 2012, 2012 American Control Conference (ACC).

[11]  Jianjun Liu,et al.  A study on interstitial heat transfer in consolidated and unconsolidated porous media , 2009 .

[12]  Mounir B. Ibrahim,et al.  Thermo-Fluid Experiments Supporting Microfabricated Regenerator Development for a Stirling Space Power Engine , 2009 .

[13]  A. J. Willmott,et al.  Digital computer simulation of a thermal regenerator , 1964 .

[14]  D. Spalding,et al.  A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows , 1972 .

[15]  S. J. Kline,et al.  Describing Uncertainties in Single-Sample Experiments , 1953 .

[16]  Terrence W. Simon,et al.  A microfabricated involute-foil regenerator for stirling engines , 2007 .

[17]  G. Eigenberger,et al.  Approximate solutions for metallic regenerative heat exchangers , 2001 .

[18]  Samir Succar.  Compressed Air Energy Storage , 2011 .

[19]  Perry Y. Li,et al.  Storage Power and Efficiency Analysis Based on CFD for Air Compressors Used for Compressed Air Energy Storage , 2012 .

[20]  Russ D. Rausch,et al.  Spatial adaption procedures on unstructured meshes for accurate unsteady aerodynamic flow computation , 1991 .

[21]  I. Rühlich,et al.  Investigations on Regenerative Heat Exchangers , 2002 .