Abstract Upon assessment of existing reinforced concrete short-span solid slab bridges according to the recently implemented Eurocodes that include more conservative shear capacity provisions and heavier axle loads, a number of these structures were found to be shear-critical. The results from recent experimental research on the shear capacity of slabs indicate that slabs benefit from transverse load distribution. Recommendations for the assessment of solid slab bridges in shear are developed on the basis of these experiments. A load spreading method for the concentrated loads is proposed and the applicability of superposition of loading is studied. The resulting most unfavourable position for the design trucks is provided and implemented in the so-called Dutch “Quick Scan” method (QSEC2). Cases of existing bridges are studied with the previously used QS-VBC as well as with the QS-EC2 that includes the recommendations. As a result of the assumed transverse load distribution, the shear stress to be considered at the support based on the recommendations becomes smaller.
[1]
Kang Su Kim,et al.
Shear Database for Reinforced Concrete Members without Shear Reinforcement
,
2003
.
[2]
R. P. Johnson,et al.
General rules and rules for buildings
,
2004
.
[3]
Joost C. Walraven.
Residual shear bearing capacity of existing bridges
,
2010
.
[4]
R J Cope.
FLEXURAL SHEAR FAILURE OF REINFORCED CONCRETE SLAB BRIDGES
,
1985
.
[5]
R.D.J.M. Steenbergen,et al.
Determining the in situ concrete strength of existing structures for assessing their structural safety
,
2012
.
[6]
A.C.W.M. Vrouwenvelder,et al.
Safety philosophy for existing structures and partial factors for traffic loads on bridges
,
2010
.
[7]
Joost C. Walraven,et al.
Experimental Study of Shear Capacity of Reinforced Concrete Slabs
,
2011
.
[8]
Joost C. Walraven,et al.
Shear Capacity of Slabs and Slab Strips Loaded Close to the Support
,
2012
.