Comparison study on the sulfate attack resistivity of cement-based materials modified with nanoSiO2 and normal SCMs: Pore structure and phase composition

[1]  N. Xie,et al.  Comparison study on the sulfate attack resistivity of cement-based materials modified with nanoSiO2 and conventional SCMs: Mechanical strength and volume stability , 2019, Construction and Building Materials.

[2]  A. Vollpracht,et al.  Tensile strength of concrete exposed to sulfate attack , 2019, Cement and Concrete Research.

[3]  R. Beddoe,et al.  The role of aluminium in C-A-S-H during sulfate attack on concrete , 2019, Cement and Concrete Research.

[4]  Lihai Zhang,et al.  Effect of interfacial transition zone on the transport of sulfate ions in concrete , 2018, Construction and Building Materials.

[5]  Luc Courard,et al.  Chloride diffusion and oxygen permeability of mortars with low active blast furnace slag , 2018, Construction and Building Materials.

[6]  Huisu Chen,et al.  Investigation of pore structure and mechanical property of cement paste subjected to the coupled action of freezing/thawing and calcium leaching , 2018, Cement and Concrete Research.

[7]  Xiao-dong Shen,et al.  Relationship between water permeability and pore structure of Portland cement paste blended with fly ash , 2018, Construction and Building Materials.

[8]  F. Xing,et al.  Expansion and degradation of cement paste in sodium sulfate solutions , 2018 .

[9]  Dengquan Wang,et al.  The role of fly ash microsphere in the microstructure and macroscopic properties of high-strength concrete , 2017 .

[10]  Z. Ye,et al.  The effects of nanoSiO2 on the properties of fresh and hardened cement-based materials through its dispersion with silica fume , 2017 .

[11]  M. Karatas,et al.  Effect of sea water and MgSO4 solution on the mechanical properties and durability of self-compacting mortars with fly ash/silica fume , 2017 .

[12]  Zengqi Zhang,et al.  Influence of the initial moist curing time on the sulfate attack resistance of concretes with different binders , 2017 .

[13]  G. Long,et al.  Physical sulfate attack on concrete lining–A field case analysis , 2017 .

[14]  Jianming Gao,et al.  Evaluation of the damage process of recycled aggregate concrete under sulfate attack and wetting-drying cycles , 2017 .

[15]  Jun Yang,et al.  Long-term properties of concrete containing limestone powder , 2017 .

[16]  M. F. Najjar,et al.  Damage mechanisms of two-stage concrete exposed to chemical and physical sulfate attack , 2017 .

[17]  Xin Cheng,et al.  Effects of nano-silica on hydration properties of tricalcium silicate , 2016 .

[18]  Linhua Jiang,et al.  Deterioration of pastes exposed to leaching, external sulfate attack and the dual actions , 2016 .

[19]  Wang Qiang,et al.  Comparison of the properties between high-volume fly ash concrete and high-volume steel slag concrete under temperature matching curing condition , 2015 .

[20]  Ali R. Pouladkhan,et al.  Comparative study on effects of Class F fly ash, nano silica and silica fume on properties of high performance self compacting concrete , 2015 .

[21]  D. Stephan,et al.  Controlling cement hydration with nanoparticles , 2015 .

[22]  B. Lothenbach,et al.  Influence of the Ca/Si ratio of the C–S–H phase on the interaction with sulfate ions and its impact on the ettringite crystallization pressure , 2015 .

[23]  Surendra P. Shah,et al.  Studies on early stage hydration of tricalcium silicate incorporating silica nanoparticles: Part II , 2015 .

[24]  Surendra P. Shah,et al.  Effects of the pozzolanic reactivity of nanoSiO2 on cement-based materials , 2015 .

[25]  W. Müllauer,et al.  Sulfate attack expansion mechanisms , 2013 .

[26]  Surendra P. Shah,et al.  Modification of cement-based materials with nanoparticles , 2013 .

[27]  Deyu Kong,et al.  Modification effects of colloidal nanoSiO2 on cement hydration and its gel property , 2013 .

[28]  Q. Zeng,et al.  Analysis of pore structure, contact angle and pore entrapment of blended cement pastes from mercury porosimetry data , 2012 .

[29]  J. Olek,et al.  Effects of Sample Preparation and Interpretation of Thermogravimetric Curves on Calcium Hydroxide in Hydrated Pastes and Mortars , 2012 .

[30]  Kefei Li,et al.  Pore structure characterization of cement pastes blended with high-volume fly-ash , 2012 .

[31]  G. Saoût,et al.  Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash , 2011 .

[32]  J. Beaudoin,et al.  Mechanical properties of calcium silicate hydrates , 2011 .

[33]  Ahmed Loukili,et al.  Durability of concrete exposed to leaching and external sulphate attacks , 2009 .

[34]  Robert J. Flatt,et al.  Thermodynamics of Crystallization Stresses in DEF , 2008 .

[35]  J. José,et al.  Multi-scale study of the fibre-matrix interface and calcium leaching in high performance concretes , 2008 .

[36]  P. Mondal.  Nanomechanical properties of cementitious materials , 2008 .

[37]  Kimberly E. Kurtis,et al.  Sulfate Attack Monitored by MicroCT and EDXRD: Influence of Cement Type, Water-To-Cement Ratio, and Aggregate , 2006 .

[38]  Alain Ehrlacher,et al.  The use of thermal analysis in assessing the effect of temperature on a cement paste , 2005 .

[39]  S. Sahu,et al.  Mechanism of concrete deterioration due to salt crystallization , 2004 .

[40]  G. Scherer.  Stress from crystallization of salt , 2004 .

[41]  F. Ulm,et al.  The effect of two types of C-S-H on the elasticity of cement-based materials: Results from nanoindentation and micromechanical modeling , 2004 .

[42]  J. Olek,et al.  MECHANISM OF SULFATE ATTACK: A FRESH LOOK. PART 2: PROPOSED MECHANISMS , 2003 .

[43]  F. Ulm,et al.  On the use of nanoindentation for cementitious materials , 2003 .

[44]  Omar Saeed Baghabra Al-Amoudi,et al.  Attack on plain and blended cements exposed to aggressive sulfate environments , 2002 .

[45]  Jan Olek,et al.  Mechanism of sulfate attack: A fresh look: Part 1: Summary of experimental results , 2002 .

[46]  Bing Tian,et al.  Does gypsum formation during sulfate attack on concrete lead to expansion , 2000 .

[47]  George W. Scherer,et al.  Crystallization in pores , 1999 .