Analytical Solution of the Continuous Cellular Automaton for Anisotropic Etching

The fabrication of micro- and nanoelectromechanical systems (MEMS/NEMS) is based on a wide variety of growth and etching technologies sequentially applied throughout process flows which may involve a dozen or more steps, their realistic simulation having become an essential part of the overall design. By focusing in the simulation of anisotropic etching as a complex example of microfabrication, in this paper, we show how to solve analytically the time evolution of the continuous cellular automaton method, thus providing a particularly suitable choice for the realization of realistic simulations for MEMS and NEMS applications. This paper presents a complete theoretical derivation of the analytical solution based on geometrical and kinetic aspects of step flow on any surface, including a new classification of the surface sites based on a mean-field treatment of the propagation of the steps. The results of the corresponding simulations are in good agreement with the experiments. The study can be seen as an example of a general procedure that is applicable to other interface propagation problems.

[1]  Z. Moktadir,et al.  Atomic scale simulation of silicon etched in aqueous KOH solution , 1995 .

[2]  Qing‐An Huang,et al.  A cellular automaton-based simulator for silicon anisotropic etching processes considering high index planes , 2007 .

[3]  C. Séquin,et al.  Computer simulation of anisotropic crystal etching , 1991, TRANSDUCERS '91: 1991 International Conference on Solid-State Sensors and Actuators. Digest of Technical Papers.

[4]  T. D. Harris,et al.  Measuring the structure of etched silicon surfaces with Raman spectroscopy , 1994 .

[5]  Henri Camon,et al.  New trends in atomic scale simulation of wet chemical etching of silicon with koh , 1996 .

[6]  A. J. Nijdam,et al.  The construction of orientation-dependent crystal growth and etch rate functions II: Application to wet chemical etching of silicon in potassium hydroxide , 2000 .

[7]  Irena Zubel,et al.  The influence of atomic configuration of (h k l) planes on adsorption processes associated with anisotropic etching of silicon , 2001 .

[8]  Risto M. Nieminen,et al.  Anisotropic wet chemical etching of crystalline silicon : atomistic Monte-Carlo simulations and experiments , 2001 .

[9]  Stephanus Büttgenbach,et al.  SUZANA: a 3D CAD tool for anisotropically etched silicon microstructures , 1996, Proceedings ED&TC European Design and Test Conference.

[10]  Adam S. Foster,et al.  An atomistic introduction to anisotropic etching , 2007 .

[11]  P. Allongue,et al.  Digital computation and in situ STM approach of silicon anisotropic etching , 1997 .

[12]  Prabhat Hajela,et al.  On the use of energy minimization for CA based analysis in elasticity , 2000 .

[13]  Henri Camon,et al.  Modelling of anisotropic etching in silicon-based sensor application , 1992 .

[14]  R. Nieminen,et al.  Surface morphology during anisotropic wet chemical etching of crystalline silicon , 2003 .

[15]  Yasuroh Iriye,et al.  Characterization of orientation-dependent etching properties of single-crystal silicon: effects of KOH concentration , 1998 .

[16]  Z. Moktadir,et al.  Simulation of silicon etching with KOH , 1997 .

[17]  S. Büttgenbach,et al.  Simulation of anisotropic chemical etching of crystalline silicon using a cellular automata model , 1994 .

[18]  Jaroslav Flidr,et al.  Extracting site-specific reaction rates from steady state surface morphologies: Kinetic Monte Carlo simulations of aqueous Si(111) etching , 1998 .

[19]  E. Obermeier,et al.  Simulation of Orientation-Dependent Etching of Silicon Using a New Step Flow Model of 3D Structuring , 2000 .

[20]  Philippe Allongue,et al.  Etching of silicon in NaOH solutions. I: In-situ STM investigation of n-Si(111) , 1993 .

[21]  H. A. Jones,et al.  Orientation-Resolved Chemical Kinetics: Using Microfabrication to Unravel the Complicated Chemistry of KOH/Si Etching , 2002 .

[22]  Irena Zubel,et al.  Etch rates and morphology of silicon (h k l) surfaces etched in KOH and KOH saturated with isopropanol solutions , 2004 .

[23]  Zhenjun Zhu,et al.  Simulation of Anisotropic Crystalline Etching using a Continuous Cellular Automata Algorithm , 2000 .

[24]  R. Nieminen,et al.  Atomistic simulations of surface coverage effects in anisotropic wet chemical etching of crystalline silicon , 2002 .

[25]  M. Hines,et al.  Etchant anisotropy controls the step bunching instability in KOH etching of silicon. , 2004, Physical review letters.

[26]  Eisuke Kita,et al.  Structural design using cellular automata , 2000 .

[27]  M. Elwenspoek,et al.  Characterisation of anisotropic etching in KOH using network etch rate function model: influence of an applied potential in terms of microscopic properties , 2006 .

[28]  Kazuo Asaumi,et al.  Anisotropic-etching process simulation system MICROCAD analyzing complete 3D etching profiles of single crystal silicon , 1997, Proceedings IEEE The Tenth Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots.

[29]  Jaroslav Flidr,et al.  An atomistic mechanism for the production of two- and three-dimensional etch hillocks on Si(111) surfaces , 1999 .

[30]  Adam S. Foster,et al.  Faster simulations of step bunching during anisotropic etching: formation of zigzag structures on Si(1 1 0) , 2007 .

[31]  J. Fruhauf,et al.  A simulation tool for orientation dependent etching , 1993 .

[32]  Michael Curt Elwenspoek,et al.  On the Mechanism of Anisotropic Etching of Silicon , 1993 .

[33]  E. Obermeier,et al.  Convex corner undercutting of {100} silicon in anisotropic KOH etching: the new step-flow model of 3-D structuring and first simulation results , 2001 .

[34]  Zhenjun Zhu,et al.  Micromachining process simulation using a continuous cellular automata method , 2000, Journal of Microelectromechanical Systems.

[35]  Qing-An Huang,et al.  A 3-D Simulator for Silicon Anisotropic Wet Chemical Etching Process Based on Cellular Automata , 2006 .

[36]  P. Allongue,et al.  In situ STM observations of the etching of n-Si(111) in NaOH solutions , 1992 .