论文信息 - The formability of annealed and pre-aged AA-2024 sheets in single-point incremental forming

The formability of annealed and pre-aged AA-2024 sheets in single-point incremental forming

The formability of AA-2024 sheets, an aerospace grade material, in the annealed and pre-aged conditions has been investigated in the single-point incremental forming (SPIF) process. The major operating parameters, namely step size, tool radius, and forming speed, of SPIF process were varied over wide ranges, and their effect on the formability was quantified through a response surface method called as central composite rotational design. It was found that the interaction of step size and tool radius is very significant on the formability. Moreover, a variation in the forming speed does not affect the formability of annealed AA-2024 sheet. However, the formability of pre-aged AA-2024 sheet decreases with the increase in the forming speed. Furthermore, the annealed sheet shows higher formability than the pre-aged sheet.

[1] G. Hussain,et al. A new formability indicator in single point incremental forming , 2009 .

[2] Jack Jeswiet,et al. Single Point Incremental Forming and the Forming Criteria for AA3003 , 2006 .

[3] L. Jie,et al. Sheet metal dieless forming and its tool path generation based on STL files , 2004 .

[4] L. Gao,et al. A novel method to test the thinning limits of sheet metals in negative incremental forming , 2007 .

[5] J. J. Park,et al. Effect of process parameters on formability in incremental forming of sheet metal , 2002 .

[6] G. Derringer,et al. Simultaneous Optimization of Several Response Variables , 1980 .

[7] F. Micari,et al. Influence of mechanical properties of the sheet material on formability in single point incremental forming , 2004 .

[8] M. Muzzupappa,et al. Application of Incremental Forming process for high customised medical product manufacturing , 2005 .

[9] M. Shim,et al. The formability of aluminum sheet in incremental forming , 2001 .

[10] J Jeswiet,et al. Wall thickness variations in single-point incremental forming , 2004 .

[11] Jian Cao,et al. Prediction of Forming Limit in Single Point Incremental Forming With the Ductile Fracture Criterion , 2007 .

[12] Zequn Zhang,et al. Formability evaluation of a pure titanium sheet in the cold incremental forming process , 2008 .

[13] Dong-Yol Yang,et al. Improvement of formability for the incremental sheet metal forming process , 2000 .