Computational investigation of the influencing parameters on the melting of phase change material in a square enclosure with built in fin and Al2O3 nanoparticles

[1]  Omid Ali Akbari,et al.  Numerical investigation of thermal energy storage system loaded with nano-enhanced phase change material with Koch snowflake fractal cross-section , 2022, Journal of Energy Storage.

[2]  M. Arıcı,et al.  A comprehensive study on melting enhancement by changing tube arrangement in a multi-tube latent heat thermal energy storage system , 2022, Journal of Energy Storage.

[3]  B. Deepanraj,et al.  Numerical Study on the Thermal Enhancement of Phase Change Material with the Addition of Nanoparticles and Changing the Orientation of the Enclosure , 2022, Journal of Nanomaterials.

[4]  Vikas,et al.  Melting dynamics analysis of a multi-tube latent heat thermal energy storage system: Numerical study , 2022, Applied Thermal Engineering.

[5]  A. Alazzam,et al.  Recent advances on the applications of phase change materials for solar collectors, practical limitations, and challenges: A critical review , 2022, Journal of Energy Storage.

[6]  S. Mehrez,et al.  Investigation on Effect of Connection Angle of “L” Shaped Fin on Charging and Discharging Process of Pcm in Vertical Enclosure , 2022, SSRN Electronic Journal.

[7]  Zhen Liu,et al.  Multi-parameter heat transfer analysis of molten PCM in an inclined enclosure , 2022, Applied Thermal Engineering.

[8]  Zhen-qian Chen,et al.  Experimental and numerical studies on melting process of phase change materials (PCMs) embedded in open-cells metal foams , 2021 .

[9]  O. Matar,et al.  Application of artificial neural network for mixed convection in a square lid-driven cavity with double vertical or horizontal oriented rectangular blocks , 2021, International Communications in Heat and Mass Transfer.

[10]  Xiaohu Yang,et al.  Effect of fin number on the melting phase change in a horizontal finned shell-and-tube thermal energy storage unit , 2021, Solar Energy Materials and Solar Cells.

[11]  M. Rawa,et al.  Simulation of melting and solidification of graphene nanoparticles-PCM inside a dual tube heat exchanger with extended surface , 2021, Journal of Energy Storage.

[12]  Arsalan Nasiri Sadr,et al.  Simulation of mixed-convection of water and nano-encapsulated phase change material inside a square cavity with a rotating hot cylinder , 2021, Journal of Energy Storage.

[13]  Haofeng Qin,et al.  Numerical study of melting and heat transfer of PCM in a rectangular cavity with bilateral flow boundary conditions , 2021 .

[14]  Yongping Huang,et al.  Numerical study on the thermal enhancement of horizontal latent heat storage units with hierarchical fins , 2021 .

[15]  M. Chaichan,et al.  Controlling the melting and solidification points temperature of PCMs on the performance and economic return of the water-cooled photovoltaic thermal system , 2021, Solar Energy.

[16]  S. Gugulothu,et al.  Numerical analysis of nanomaterial-based sustainable latent heat thermal energy storage system by improving thermal characteristics of phase change material , 2021, Environmental Science and Pollution Research.

[17]  Hameed B. Mahood,et al.  Natural convection improvement of PCM melting in partition latent heat energy storage: Numerical study with experimental validation , 2021, International Communications in Heat and Mass Transfer.

[18]  M. Ghalambaz,et al.  Natural convection from a bottom heated of an asymmetrical U-shaped enclosure with nano-encapsulated phase change material , 2021 .

[19]  Gurpreet Singh Sodhi,et al.  Compound charging and discharging enhancement in multi-PCM system using non-uniform fin distribution , 2021 .

[20]  Yuying Yan,et al.  Investigation on Battery Thermal Management Based on Phase Change Energy Storage Technology , 2021, Advances in Heat Transfer and Thermal Engineering.

[21]  Chao Xu,et al.  Numerical investigation of a dual-PCM heat sink using low melting point alloy and paraffin , 2021 .

[22]  H. Abolghasemi,et al.  Thermal performance investigation of concentric and eccentric shell and tube heat exchangers with different fin configurations containing phase change material , 2021 .

[23]  Lioua Kolsi,et al.  Heat transfer and fluid flow in a PCM-filled enclosure: Effect of inclination angle and mid-separation fin , 2021, International Communications in Heat and Mass Transfer.

[24]  H. Abolghasemi,et al.  Experimental and numerical investigations of thermal performance enhancement in a latent heat storage heat exchanger using bifurcated and straight fins , 2021 .

[25]  S. Yao,et al.  Study on solidification performance of PCM by longitudinal triangular fins in a triplex-tube thermal energy storage system , 2021, Energy.

[26]  Zhibin Lin,et al.  Effect of melting point on thermodynamics of thin PCM reinforced residential frame walls in different climate zones , 2021 .

[27]  H. Abdul Rahman,et al.  Numerical and experimental analysis of the tilt angle’s effects on the characteristics of the melting process of PCM-based as PV cell’s backside heat sink , 2021 .

[28]  Mohammed N. Alghamdi,et al.  Combined effect of using porous media and nano-particle on melting performance of PCM filled enclosure with triangular double fins , 2021 .

[29]  L. Rocha,et al.  Design of fin structures for phase change material (PCM) melting process in rectangular cavities , 2021 .

[30]  R. Naresh,et al.  Microencapsulated bio-based phase change material-micro concrete composite for thermal energy storage , 2021, Journal of Building Engineering.

[31]  Ya-Ling He,et al.  Design of non-uniformly distributed annular fins for a shell-and-tube thermal energy storage unit , 2020 .

[32]  Mert Gürtürk,et al.  A new approach in the design of heat transfer fin for melting and solidification of PCM , 2020 .

[33]  D. Toghraie,et al.  Comparative study of mixed convection heat transfer of water–Cu nanofluid in an enclosure having multiple rotating circular cylinders with different configurations and considering harmonic cylinders rotation , 2020, Journal of Thermal Analysis and Calorimetry.

[34]  H. Oztop,et al.  Mixed convection in a PCM filled cavity under the influence of a rotating cylinder , 2020 .

[35]  M. Siavashi,et al.  Battery thermal management with thermal energy storage composites of PCM, metal foam, fin and nanoparticle , 2020 .

[36]  B. Kok.  Examining effects of special heat transfer fins designed for the melting process of PCM and Nano-PCM , 2020 .

[37]  A. H. Isfahani,et al.  An experimental study on MWCNT–water nanofluids flow and heat transfer in double-pipe heat exchanger using porous media , 2019, Journal of Thermal Analysis and Calorimetry.

[38]  Vignesh Pethurajan,et al.  Heat transfer performance of graphene nano-platelets laden micro-encapsulated PCM with polymer shell for thermal energy storage based heat sink , 2019, Applied Thermal Engineering.

[39]  M. Rahimi,et al.  Nano-enhancement of phase change material in a shell and multi-PCM-tube heat exchanger , 2019, Journal of Energy Storage.

[40]  Ahmad Shafee,et al.  Heat transfer behavior of nanoparticle enhanced PCM solidification through an enclosure with V shaped fins , 2019, International Journal of Heat and Mass Transfer.

[41]  C. Nie,et al.  Improving the melting performance of a horizontal shell-tube latent-heat thermal energy storage unit using local enhanced finned tube , 2019, Energy and Buildings.

[42]  A. Acır,et al.  Investigation of fin application effects on melting time in a latent thermal energy storage system with phase change material (PCM) , 2018, Applied Thermal Engineering.

[43]  Ioan Sarbu,et al.  Review on heat transfer analysis in thermal energy storage using latent heat storage systems and phase change materials , 2018, International Journal of Energy Research.

[44]  Mohit Jain,et al.  Modelling and experimental study of latent heat thermal energy storage with encapsulated PCMs for solar thermal applications , 2018, Applied Thermal Engineering.

[45]  Ali J. Chamkha,et al.  Natural convection in a CuO–water nanofluid filled cavity under the effect of an inclined magnetic field and phase change material (PCM) attached to its vertical wall , 2018, Journal of Thermal Analysis and Calorimetry.

[46]  A. R. Darzi,et al.  Melting and solidification of PCM embedded in porous metal foam in horizontal multi-tube heat storage system , 2018, Energy Conversion and Management.

[47]  M. Farhadi,et al.  Melting and solidification of PCM enhanced by radial conductive fins and nanoparticles in cylindrical annulus , 2016 .

[48]  Akand W. Islam,et al.  Mixed convection in a lid driven square cavity with an isothermally heated square blockage inside , 2012 .

[49]  Ruzhu Wang,et al.  Numerical heat transfer analysis of the packed bed latent heat storage system based on an effective packed bed model , 2010 .

[50]  C. Balaji,et al.  Liquid crystal thermography based study on melting dynamics and the effect of mushy zone constant in numerical modeling of melting of a phase change material , 2022 .

[51]  A. Tiwari,et al.  Characterization of Nanofluids as an advanced heat transporting medium for Energy Systems , 2017 .

[52]  Arun S. Mujumdar,et al.  Numerical study on melting of paraffin wax with Al2O3 in a square enclosure , 2012 .