Progress of the development of reactors for pyrolysis of municipal waste

The development of reactors with varied configurations for the pyrolysis of municipal waste is discussed in this review.

[1]  N. Miskolczi,et al.  Thermo-catalytic co-pyrolysis of waste plastic and paper in batch and tubular reactors for in-situ product improvement. , 2020, Journal of environmental management.

[2]  A. Bridgwater,et al.  Influence of Moisture Contents on the Fast Pyrolysis of Trommel Fines in a Bubbling Fluidized Bed Reactor , 2020, Waste and Biomass Valorization.

[3]  Shu Zhang,et al.  Coke Formation during Thermal Treatment of Bio-oil , 2020 .

[4]  Shu Zhang,et al.  Evolution of the functional groups/structures of biochar and heteroatoms during the pyrolysis of seaweed , 2020 .

[5]  Mortaza Gholizadeh,et al.  Gasification of wastes: The impact of the feedstock type and co‐gasification on the formation of volatiles and char , 2020, International Journal of Energy Research.

[6]  N. Miskolczi,et al.  Value added hydrocarbons obtained by pyrolysis of contaminated waste plastics in horizontal tubular reactor: In situ upgrading of the products by chlorine capture , 2019 .

[7]  Xun Hu,et al.  Biomass pyrolysis: A review of the process development and challenges from initial researches up to the commercialisation stage , 2019, Journal of Energy Chemistry.

[8]  Shu Zhang,et al.  Cross-interaction during Co-gasification of wood, weed, plastic, tire and carton. , 2019, Journal of environmental management.

[9]  S. Ucar,et al.  Influence of Co-Pyrolysis of Waste Tetra Pak with Waste Motor Oil on Product Distribution and Properties for Fuel Application , 2019, Energy & Fuels.

[10]  K. Mohanty,et al.  Pyrolysis of three waste biomass: Effect of biomass bed thickness and distance between successive beds on pyrolytic products yield and properties , 2019, Renewable Energy.

[11]  Xun Hu,et al.  A mini review of the specialties of the bio-oils produced from pyrolysis of 20 different biomasses , 2019, Renewable and Sustainable Energy Reviews.

[12]  J. Piekutin.  Monitoring of Groundwater in the Area of a Reclaimed Municipal Waste Landfill , 2019, Journal of Ecological Engineering.

[13]  R. Kandiyoti,et al.  Influence of Reactor Design on Product Distributions from Biomass Pyrolysis , 2019, ACS Sustainable Chemistry & Engineering.

[14]  Genovaitė Liobikienė,et al.  Waste problem in European Union and its influence on waste management behaviours. , 2019, The Science of the total environment.

[15]  Pasquale Contestabile,et al.  Combined Exploitation of Offshore Wind and Wave Energy in the Italian Seas: A Spatial Planning Approach , 2019, Front. Energy Res..

[16]  D. Iribarren,et al.  Long-term opportunities for electricity production through municipal solid waste incineration when internalising external costs , 2019, Journal of Cleaner Production.

[17]  M. Irfan,et al.  Production of hydrogen enriched syngas from municipal solid waste gasification with waste marble powder as a catalyst , 2019, International Journal of Hydrogen Energy.

[18]  A. S. Aburiazaiza,et al.  Catalytic Pyrolysis of Plastic Waste: Moving Toward Pyrolysis Based Biorefineries , 2019, Front. Energy Res..

[19]  Chun-Zhu Li,et al.  High yields of solid carbonaceous materials from biomass , 2019, Green Chemistry.

[20]  Boqiang Lin,et al.  Assessment of waste incineration power with considerations of subsidies and emissions in China , 2019, Energy Policy.

[21]  A. Ragauskas,et al.  Catalytic fast co-pyrolysis of bamboo sawdust and waste tire using a tandem reactor with cascade bubbling fluidized bed and fixed bed system , 2019, Energy Conversion and Management.

[22]  M. Guida,et al.  Pyrolysis of brown algae (Bifurcaria Bifurcata) in a stainless steel tubular reactor: From a review to a case study , 2018, Progress in Agricultural Engineering Sciences.

[23]  P. Salatino,et al.  Modelling oxy-pyrolysis of sewage sludge in a rotary kiln reactor , 2018, Fuel.

[24]  D. Dong,et al.  Pyrolysis of poplar, cellulose and lignin: Effects of acidity and alkalinity of the metal oxide catalysts , 2018, Journal of Analytical and Applied Pyrolysis.

[25]  A. Subiantoro,et al.  Municipal Waste Management Strategy Review and Waste-to-Energy Potentials in New Zealand , 2018, Sustainability.

[26]  A. Gómez-Barea,et al.  The influence of volatiles to carrier gas ratio on gas and tar yields during fluidized bed pyrolysis tests , 2018, Fuel.

[27]  Mingjiang Ni,et al.  Life cycle assessment of pyrolysis, gasification and incineration waste-to-energy technologies: Theoretical analysis and case study of commercial plants. , 2018, The Science of the total environment.

[28]  Ningbo Gao,et al.  Municipal solid waste (MSW) pyrolysis for bio-fuel production: A review of effects of MSW components and catalysts , 2018, Fuel Processing Technology.

[29]  En-chen Jiang,et al.  BTX from anisole by hydrodeoxygenation and transalkylation at ambient pressure with zeolite catalysts , 2018, Fuel.

[30]  Hong Li,et al.  A simple step-change method to determine mean residence time in rotary kiln and a predictive model at low inclination , 2018, Powder Technology.

[31]  A. S. Aburiazaiza,et al.  Effect of advanced catalysts on tire waste pyrolysis oil , 2018 .

[32]  D. Bastviken,et al.  Remote sensing of methane and nitrous oxide fluxes from waste incineration. , 2018, Waste management.

[33]  A. Gupta,et al.  Synergistic effects in steam gasification of combined biomass and plastic waste mixtures , 2018 .

[34]  K. Norinaga,et al.  Predicting molecular composition of primary product derived from fast pyrolysis of lignin with semi-detailed kinetic model , 2018 .

[35]  M. Guida,et al.  Properties of bio-oil and bio-char produced by sugar cane bagasse pyrolysis in a stainless steel tubular reactor , 2017 .

[36]  M. Godinho,et al.  Fodder radish seed cake pyrolysis for bio-oil production in a rotary kiln reactor , 2017 .

[37]  Klas Engvall,et al.  Modeling and pilot plant runs of slow biomass pyrolysis in a rotary kiln , 2017 .

[38]  Atul Kumar,et al.  A review on technological options of waste to energy for effective management of municipal solid waste. , 2017, Waste management.

[39]  Jia-Wei Lu,et al.  Status and perspectives of municipal solid waste incineration in China: A comparison with developed regions. , 2017, Waste management.

[40]  M. Vaverková,et al.  Environmental assessment of the effects of a municipal landfill on the content and distribution of heavy metals in Tanacetum vulgare L. , 2017, Chemosphere.

[41]  H. Jouhara,et al.  Potentials of pyrolysis processes in the waste management sector , 2017 .

[42]  Ji-Lu Zheng,et al.  Preparation and characterization of bio-polyol and bio-based flexible polyurethane foams from fast pyrolysis of wheat straw , 2017 .

[43]  S M Al-Salem,et al.  A review on thermal and catalytic pyrolysis of plastic solid waste (PSW). , 2017, Journal of environmental management.

[44]  E. Bontempi,et al.  Waste silica sources as heavy metal stabilizers for municipal solid waste incineration fly ash , 2017 .

[45]  L. S. Filho,et al.  Synthesis of carbon nanostructures by the pyrolysis of wood sawdust in a tubular reactor , 2017 .

[46]  Yuichi Moriguchi,et al.  Economic growth and selection of municipal waste treatment options in Bangkok , 2017 .

[47]  U. Mäder,et al.  Chemical associations and mobilization of heavy metals in fly ash from municipal solid waste incineration. , 2017, Waste management.

[48]  S R Samadder,et al.  Analysis of the contaminants released from municipal solid waste landfill site: A case study. , 2017, The Science of the total environment.

[49]  J. Salminen,et al.  Metal removal from Municipal Solid Waste Incineration fly ash: A comparison between chemical leaching and bioleaching. , 2017, Waste management.

[50]  M. O. Carpinlioglu,et al.  A review on plasma gasification for solid waste disposal , 2017 .

[51]  Luoyu Wei,et al.  A review of groundwater contamination near municipal solid waste landfill sites in China. , 2016, The Science of the total environment.

[52]  Maria Angela Zaccarelli-Marino,et al.  Overt Primary Hypothyroidism in an Industrial Area in São Paulo, Brazil: The Impact of Public Disclosure , 2016, International journal of environmental research and public health.

[53]  M. Godinho,et al.  Performance of rotary kiln reactor for the elephant grass pyrolysis. , 2016, Bioresource technology.

[54]  Cintia Marangoni,et al.  Oxidative fast pyrolysis of banana leaves in fluidized bed reactor , 2016 .

[55]  S. Lam,et al.  Fruit waste as feedstock for recovery by pyrolysis technique , 2016 .

[56]  V. Václavík,et al.  Leachate from Municipal Waste Landfill and Its Natural Degradation—A Case Study of Zubří, Zlín Region , 2016, International journal of environmental research and public health.

[57]  Abel Rouboa,et al.  Municipal solid waste gasification in semi-industrial conditions using air-CO2 mixtures , 2016 .

[58]  Shengyong Lu,et al.  Chlorophenols in Municipal Solid Waste Incineration: A review , 2016 .

[59]  M. Ni,et al.  Effect of Operating Parameters and Moisture Content on Municipal Solid Waste Pyrolysis and Gasification , 2016 .

[60]  Qiyuan Peng,et al.  Improved approaches to the network design problem in regional hazardous waste management systems , 2016 .

[61]  Yang Zhang,et al.  Characterization of adhesive penetration in wood bond by means of scanning thermal microscopy (SThM) , 2016 .

[62]  J. Sahu,et al.  Effect of process parameters on production of biochar from biomass waste through pyrolysis: A review , 2016 .

[63]  Recep Yumrutaş,et al.  Rotary kiln and batch pyrolysis of waste tire to produce gasoline and diesel like fuels , 2016 .

[64]  M. Ahmedna,et al.  Physico-chemical characterization of biochars from solid municipal waste for use in soil amendment , 2016 .

[65]  B. Steenari,et al.  Leaching optimization of municipal solid waste incineration ash for resource recovery: A case study of Cu, Zn, Pb and Cd. , 2016, Waste management.

[66]  M. Ni,et al.  Partitioning of Heavy Metals in Municipal Solid Waste Pyrolysis, Gasification, and Incineration , 2015 .

[67]  Carla Tagliaferri,et al.  Life cycle assessment of conventional and two-stage advanced energy-from-waste technologies for municipal solid waste treatment , 2015 .

[68]  Roberto Turconi,et al.  Life cycle assessment of thermal waste-to-energy technologies: review and recommendations. , 2015, Waste management.

[69]  Hui Wang,et al.  Life cycle assessment of fast pyrolysis of municipal solid waste in North Carolina of USA , 2015 .

[70]  P. He,et al.  Pyrolysis technologies for municipal solid waste: a review. , 2014, Waste management.

[71]  R. Kandiyoti,et al.  Pyrolytic Reactions of Lignin within Naturally Occurring Plant Matrices: Challenges in Biomass Pyrolysis Modeling Due to Synergistic Effects , 2014 .

[72]  O. Tursunov,et al.  A comparison of catalysts zeolite and calcined dolomite for gas production from pyrolysis of municipal solid waste (MSW). , 2014 .

[73]  Jamal Chaouki,et al.  Distributed Microwave Pyrolysis of Domestic Waste , 2014 .

[74]  Haitao Huang,et al.  Development of plasma pyrolysis/gasification systems for energy efficient and environmentally sound waste disposal , 2013 .

[75]  L. Helsen,et al.  The crucial role of Waste-to-Energy technologies in enhanced landfill mining: a technology review , 2013 .

[76]  N. Miskolczi,et al.  Comparision of real waste (MSW and MPW) pyrolysis in batch reactor over different catalysts. Part I: product yields, gas and pyrolysis oil properties. , 2013, Bioresource technology.

[77]  A. Zaman,et al.  Life cycle assessment of pyrolysis–gasification as an emerging municipal solid waste treatment technology , 2013, International Journal of Environmental Science and Technology.

[78]  V. Gedam,et al.  Pyrolysis of Municipal Solid Waste for Syngas Production by Microwave Irradiation , 2012, Natural Resources Research.

[79]  Sonja Schreurs,et al.  Study of the pyrolysis of municipal solid waste for the production of valuable products , 2011 .

[80]  C. Briens,et al.  Experimental Investigations into the Insecticidal, Fungicidal, and Bactericidal Properties of Pyrolysis Bio-oil from Tobacco Leaves Using a Fluidized Bed Pilot Plant , 2010 .

[81]  Lei Cai,et al.  Influence of particle size on pyrolysis and gasification performance of municipal solid waste in a fixed bed reactor. , 2010, Bioresource technology.

[82]  Atiq Uz Zaman,et al.  Comparative study of municipal solid waste treatment technologies using life cycle assessment method , 2010 .

[83]  Fan Yang,et al.  Syngas production from pyrolysis of municipal solid waste (MSW) with dolomite as downstream catalysts , 2010 .

[84]  Hsien Hui Khoo,et al.  Life cycle impact assessment of various waste conversion technologies. , 2009, Waste management.

[85]  Richard P. Johnson,et al.  Microwave flash pyrolysis. , 2009, The Journal of organic chemistry.

[86]  M. Ni,et al.  Pyrolysis characteristics of organic components of municipal solid waste at high heating rates. , 2009, Waste management.

[87]  I. Hasegawa,et al.  Pyrolysis of the mixture of biomass and plastics in countercurrent flow reactor Part I: Experimental analysis and modeling of kinetics , 2008 .

[88]  Andrea Gasparella,et al.  Energy and environmental analysis of an innovative system based on municipal solid waste (MSW) pyrolysis and combined cycle , 2008 .

[89]  L. Tang,et al.  Treatment of organic waste using thermal plasma pyrolysis technology , 2007 .

[90]  John Brammer,et al.  Opportunities for biomass-derived "bio-oil" in European heat and power markets , 2006 .

[91]  Hsien Hui Khoo,et al.  Life cycle evaluation and economic considerations of the pyrolysis-gasification of municipal solid waste in Singapore , 2006 .

[92]  H. Jianjun,et al.  Thermodynamic Study of Water-Steam Plasma Pyrolysis of Medical Waste for Recovery of CO and H2 , 2005 .

[93]  Haitao Huang,et al.  Thermal plasma pyrolysis of used tires for carbon black recovery , 2005 .

[94]  Z. Yufeng,et al.  Experimental studies on low-temperature pyrolysis of municipal household garbage: temperature influence on pyrolysis product distribution , 2005 .

[95]  M. Islam,et al.  Pyrolytic oil from fixed bed pyrolysis of municipal solid waste and its characterization , 2005 .

[96]  N. Kubota,et al.  Evaluation of char fuel ratio in municipal pyrolysis waste , 2004 .

[97]  M. Antal,et al.  The Art, Science, and Technology of Charcoal Production† , 2003 .

[98]  Kefa Cen,et al.  Axial transport and residence time of MSW in rotary kilns: Part I. Experimental , 2002 .

[99]  Ravikishan R. Guddeti,et al.  Depolymerization of Polyethylene Using Induction-Coupled Plasma Technology , 2000 .

[100]  K. Cen,et al.  Experimental studies on municipal solid waste pyrolysis in a laboratory-scale rotary kiln , 1999 .

[101]  É. Marty,et al.  The Eddith Thermolysis Process: a Ground-Breaking Solution for Clean Treatment of Wastes , 1998 .

[102]  José A. Caballero,et al.  Kinetic models for the thermal degradation of heterogeneous materials , 1995 .

[103]  José A. Caballero,et al.  Comparison between the pyrolysis products obtained from different organic wastes at high temperatures , 1995 .

[104]  A. Marcilla,et al.  Kinetic study of the flash pyrolysis of municipal solid waste in a fluidized bed reactor at high temperature , 1995 .

[105]  Donald A. Hoffman,et al.  Batch retort pyrolysis of solid municipal wastes , 1968 .

[106]  R. Meade.  The Development of the Rotary Kiln and Its Application to Various Chemical and Metallurgical Processes , 1914 .

[107]  Yun Yu,et al.  Effects of Ca and Na acetates on nitrogen transformation during sewage sludge pyrolysis , 2019, Proceedings of the Combustion Institute.

[108]  Xun Hu,et al.  Pyrolysis of different wood species: Impacts of C/H ratio in feedstock on distribution of pyrolysis products , 2019, Biomass and Bioenergy.

[109]  Eliseu Monteiro,et al.  Co-gasification and recent developments on waste-to-energy conversion: A review , 2018 .

[110]  P. Mativenga,et al.  A Benchmark Study of Waste Tyre Recycling in South Africa to European Union Practice , 2018 .

[111]  J. Wiater,et al.  EFFECT OF SEALED MUNICIPAL WASTE LANDFILL ON THE QUALITY OF UNDERGROUND WATER , 2016 .

[112]  H. Jakobsen,et al.  Chemical Reaction Engineering , 2014 .

[113]  Zhiquan Hu,et al.  Effect of particle size on pyrolysis of single-component municipal solid waste in fixed bed reactor , 2010 .

[114]  C. Marculescu,et al.  Pilot installation for the thermo-chemical characterisation of solid wastes. , 2007, Waste management.

[115]  Anthony John Griffiths,et al.  Environmental and economic modelling : A case study of municipal solid waste management scenarios in Wales , 2007 .

[116]  Paul T. Williams,et al.  Characterization of Products from the Pyrolysis of Municipal Solid Waste , 2007 .

[117]  T Sabbas,et al.  Management of municipal solid waste incineration residues. , 2003, Waste management.

[118]  C. Luengo,et al.  Brazilian Journal of Chemical Engineering BIOPITCH PRODUCED FROM EUCALYPTUS WOOD PYROLYSIS LIQUIDS AS A RENEWABLE BINDER FOR CARBON ELECTRODE MANUFACTURE , 2002 .

[119]  S. K. Nema,et al.  Plasma pyrolysis of medical waste , 2002 .