Seismic performance of energy-dissipating post-tensioned CLT shear wall structures II: Dynamic analysis and dissipater comparison

[1]  L. Jacobsen.  Damping in Composite Structures , 1960 .

[2]  J. Kelly,et al.  Mechanisms of energy absorption in special devices for use in earthquake resistant structures , 1972 .

[3]  James M. Kelly,et al.  Hysteretic dampers for earthquake‐resistant structures , 1974 .

[4]  Stephen Pessiki,et al.  Seismic behavior and design of unbonded post-tensioned precast concrete frames , 1999 .

[5]  C. Allin Cornell,et al.  SEISMIC PERFORMANCE EVALUATION FOR STEEL MOMENT FRAMES , 2002 .

[6]  Andre Filiatrault,et al.  Performance-Based Seismic Design of Wood Framed Buildings , 2002 .

[7]  Alessandro Palermo,et al.  Seismic design of multi-storey buildings using Laminated Veneer Lumber (LVL) , 2005 .

[8]  C. Sandhaas,et al.  SOFIE Project - Cyclic tests on cross-laminated wooden panels , 2006 .

[9]  A. Buchanan,et al.  Experimental investigations on LVL seismic resistant wall and frame subassemblies , 2006 .

[10]  C. Sandhaas,et al.  Quasi-static and pseudo-dynamic tests on X-lam walls and buildings , 2006 .

[11]  José I. Restrepo,et al.  Seismic performance of self-centering structural walls incorporating energy dissipators , 2007 .

[12]  Mervyn J. Kowalsky,et al.  Displacement-based seismic design of structures , 2007 .

[13]  Alessandro Palermo,et al.  Seismic response of hybrid-LVL coupled walls under quasi-static and pseudo-dynamic testing , 2007 .

[14]  Lydell Wiebe,et al.  Mitigation of Higher Mode Effects in Base-Rocking Systems by Using Multiple Rocking Sections , 2009 .

[15]  Gian Michele Calvi,et al.  Introduction to a Model Code for Displacement-Based Seismic Design , 2010 .

[16]  Timothy J. Sullivan,et al.  Towards a simplified Direct DBD procedure for the seismic design of moment resisting frames with viscous dampers , 2012 .

[17]  A. Iqbal,et al.  "Seismic response of post-tensioned LVL walls coupled with plywood sheets" , 2012 .

[18]  John W. van de Lindt,et al.  Approximate R-Factor for Cross-Laminated Timber Walls in Multistory Buildings , 2013 .

[19]  Naohito Kawai,et al.  SOFIE project – 3D shaking table test on a seven‐storey full‐scale cross‐laminated timber building , 2013 .

[20]  Stefano Pampanin,et al.  Post-Tensioned Glulam Beam-Column Joints with Advanced Damping Systems: Testing and Numerical Analysis , 2014 .

[21]  Nawawi Chouw,et al.  A new type of symmetric slip-friction connector , 2014 .

[22]  Gerhard Schickhofer,et al.  Shaking-table test of a cross-laminated timber structure , 2015 .

[23]  Alessandro Palermo,et al.  Performance and Design of LVL Walls Coupled with UFP Dissipaters , 2015 .

[24]  Alessandro Palermo,et al.  Quasi-static cyclic testing of two-thirds scale unbonded post-tensioned rocking dissipative timber walls , 2016 .

[25]  Arijit Sinha,et al.  Performance of Steel Energy Dissipators Connected to Cross-Laminated Timber Wall Panels Subjected to Tension and Cyclic Loading , 2016 .

[26]  Pierre Quenneville,et al.  Seismic performance of hybrid self-centring steel-timber rocking core walls with slip friction connections , 2016 .

[27]  Massimo Fragiacomo,et al.  Non-linear simulation of shaking-table tests on 3- and 7-storey X-Lam timber buildings , 2016 .

[28]  Stefano Pampanin,et al.  Fuse-Type External Replaceable Dissipaters: Experimental Program and Numerical Modeling , 2016 .

[29]  Alessandro Palermo,et al.  Determination of the seismic performance factors for post‐tensioned rocking timber wall systems , 2017 .

[30]  Pennung Warnitchai,et al.  Reduction of inelastic seismic demands in a mid‐rise rocking wall structure designed using the displacement‐based design procedure , 2017 .

[31]  J. D. Dolan,et al.  Analytical and Experimental Lateral-Load Response of Self-Centering Posttensioned CLT Walls , 2017 .

[32]  Wei Wang,et al.  Self-centring behaviour of steel and steel-concrete composite connections equipped with NiTi SMA bolts , 2017 .

[33]  Xiaofeng Sun,et al.  Performance evaluation of multi-storey cross-laminated timber structures under different earthquake hazard levels , 2018, Journal of Wood Science.

[34]  Richard Sause,et al.  Experimental Investigation of Self-Centering Cross-Laminated Timber Walls , 2017 .

[35]  Yang Dong,et al.  Resilient steel frames installed with self-centering dual-steel buckling-restrained brace , 2018, Journal of Constructional Steel Research.

[36]  Xiaofeng Sun,et al.  Bending and compressive properties of cross-laminated timber (CLT) panels made from Canadian hemlock , 2018, Construction and Building Materials.

[37]  Pouyan Zarnani,et al.  Experimental Testing of Rocking Cross-Laminated Timber Walls with Resilient Slip Friction Joints , 2018 .

[38]  Solomon Tesfamariam,et al.  State-of-the-art review of displacement-based seismic design of timber buildings , 2018, Construction and Building Materials.

[39]  Alessandro Palermo,et al.  Design Approach to Predict Post-Tensioning Losses in Post-Tensioned Timber Frames , 2018, Journal of Structural Engineering.

[40]  Minjuan He,et al.  Performance-based Seismic Design of a Pendulum Tuned Mass Damper System , 2019 .

[41]  Xiaofeng Sun,et al.  Seismic performance assessment of conventional CLT shear wall structures and post-tensioned CLT shear wall structures , 2019, Engineering Structures.