Dental materials: 1981 literature review. Part 2.

Abstract This review, which is presented in two parts, covers the work on dental materials published in 1981. Included in Part 1 were sections on dental biomechanics, composite filling materials, acrylic resins, microleakage and dental cements. Part 2 includes sections on dental ceramics, endodontic materials, fissure sealants, dental amalgam, casting alloys, impression materials, and model and die materials.

[1]  J. McCabe,et al.  The rheological properties of dental impression materials , 1981, British Dental Journal.

[2]  D. Ørstavik.  Antibacterial properties of root canal sealers, cements and pastes. , 1981 .

[3]  A. Jodaikin,et al.  The Effects of Cavity Smear Layer Removal on Experimental Marginal Leakage around Amalgam Restorations , 1981, Journal of dental research.

[4]  H. Sherman,et al.  An analysis of the development of complete denture impression techniques. , 1981, The Journal of prosthetic dentistry.

[5]  B. Ellis,et al.  The setting characteristics of alginate impression materials , 1981, British Dental Journal.

[6]  J I Nicholls,et al.  Distortion of ceramometal fixed partial dentures during the firing cycle. , 1981, The Journal of prosthetic dentistry.

[7]  B B Lewis,et al.  Formaldehyde in dentistry: a review of mutagenic and carcinogenic potential. , 1981, Journal of the American Dental Association.

[8]  Y. Kinouchi,et al.  Cytotoxicity of Pd-Co dental casting ferromagnetic alloys. , 1981, Journal of dental research.

[9]  S. W. Twiggs,et al.  Glass Transition Temperatures of Dental Porcelain , 1981, Journal of dental research.

[10]  P. H. Dehoff,et al.  Analysis of Thermally-induced Stresses in Porcelain-Metal Systems , 1983, Journal of dental research.

[11]  A. Kuhn.  Corrosion of Co-Cr alloys in aqueous environments. , 1981, Biomaterials.

[12]  G. Cathey,et al.  A technique for placement of calcium hydroxide in the root canal system. , 1981, Journal of the American Dental Association.

[13]  G. B. Winter,et al.  Fissure sealants. Further results at 4 years , 1981, British Dental Journal.

[14]  C W Svare,et al.  The effect of repeated firings and strength on marginal distortion in two ceramometal systems. , 1981, The Journal of prosthetic dentistry.

[15]  I. A. Ball.  Pit and fissure sealing with Concise Enamel Bond , 1981, British Dental Journal.

[16]  R. Černý.  The claspless partial denture. , 1981, Australian dental journal.

[17]  D Brown,et al.  An update on elastomeric impression materials , 1981, British Dental Journal.

[18]  A. Prasad,et al.  In vitro Corrosion and Tarnish Analysis of the Ag-Pd Binary System , 1981, Journal of dental research.

[19]  W F Malone,et al.  Comparison of elastomeric impression materials used in fixed prosthodontics. , 1981, The Journal of prosthetic dentistry.

[20]  R. Kusy,et al.  Age-hardening and tensile properties of low gold (10-14 kt.) alloys. , 1981, Journal of biomedical materials research.

[21]  T. Dérand.  Stresses in the anchor crowns of a metal-ceramic bridge in model experiments. , 1981, Journal of oral rehabilitation.

[22]  J. Marlin,et al.  Clinical use of injection-molded thermoplasticized gutta-percha for obturation of the root canal system: a preliminary report. , 1981, Journal of endodontics.

[23]  K. Langeland,et al.  Intraosseous implantation for biological evaluation of endodontic materials. , 1981, Journal of endodontics.

[24]  C. Lloyd,et al.  The effect of mercury on the fatigue life of a dental gold alloy. , 1981, Journal of oral rehabilitation.

[25]  J. Eick,et al.  A critical evaluation of the acute systemic toxicity test for dental alloys using histopathologic criteria. , 1981, Journal of biomedical materials research.

[26]  S. Handelman,et al.  Clinical assessment of wear of two pit and fissure sealants. , 1981, The Journal of prosthetic dentistry.

[27]  P L Millstein,et al.  Differential accuracy of silicone-body and self-curing resin interocclusal records and associated weight loss. , 1981, The Journal of prosthetic dentistry.

[28]  R. Bryant.  Marginal fracture of amalgam restorations. A review. , 1981, Australian dental journal.

[29]  J. Mondelli,et al.  Influence of some factors on the fit of cemented crowns. , 1981, The Journal of prosthetic dentistry.

[30]  W B Eames,et al.  The casting misfit: how to cope. , 1981, The Journal of prosthetic dentistry.

[31]  L. Kolehmainen.  Evaluation of a fluoride-containing varnish in children with low caries incidence. , 1981, Scandinavian journal of dental research.

[32]  J. A. Stackhouse.  Impression materials.. and electrodeposits. Part I: Impression materials. , 1981, The Journal of prosthetic dentistry.

[33]  T. Vaidyanathan,et al.  Correlation Between Macroscopic Porosity Location and Liquid Metal Pressure in Centrifugal Casting Technique , 1981, Journal of dental research.

[34]  G. Oilo,et al.  Bond strength of porcelain to dental alloys - an evaluation of two test methods. , 1981, Scandinavian journal of dental research.

[35]  M I MacEntee,et al.  The Tensile and Shear Strength of a Base Metal Weld Joint Used in Dentistry , 1981, Journal of dental research.

[36]  R. Simonsen.  The clinical effectiveness of a colored pit and fissure sealant at 24 months. , 1981, Pediatric dentistry.

[37]  O. Zmener.  Evaluation of the apical seal obtained with endodontic implant stabilizers and different cementing materials. , 1981, Oral surgery, oral medicine, and oral pathology.

[38]  R. German,et al.  Copper and silver corrosion activity in crown and bridge alloys. , 1981, Journal of dental research.

[39]  R. Storer,et al.  An investigation of methods available for sterilising impressions , 1981, British Dental Journal.

[40]  Wetting effects of surface treatments on inlay wax-investment combinations. , 1981, Journal of dental research.

[41]  Equipment,et al.  Porcelain-metal alloy compatibility: criteria and test methods. Council on Dental Materials, Instruments, and Equipment. , 1981, Journal of the American Dental Association.

[42]  H. Ogura,et al.  Inner surface roughness of complete cast crowns made by centrifugal casting machines. , 1981, The Journal of prosthetic dentistry.

[43]  D. B. Mahler,et al.  Effect of age on the creep of a high-copper amalgam. , 1981, Journal of biomedical materials research.

[44]  J. Brudvik,et al.  Stress-relaxation testing. Part II: comparison of bending profiles, microstructures, microhardnesses, and surface characteristics of several wrought wires. , 1981, The Journal of prosthetic dentistry.

[45]  R. Earnshaw,et al.  The effect of alginate impressions on the surface of cast gypsum. II. The role of sodium sulphate in incompatibility. , 1981, Australian dental journal.

[46]  R. T. Chamberlain,et al.  Nickel solubility from nickel-chromium dental casting alloys. , 1981, Journal of biomedical materials research.

[47]  R. Schneider.  Custom metal occlusal surfaces for acrylic resin denture teeth. , 1981, The Journal of prosthetic dentistry.

[48]  K. Langeland,et al.  Biological evaluation of Hydron. , 1981, Journal of endodontics.

[49]  J. Weaver,et al.  Blood Pressure and Heart Rate Responses to Anticipated High-stress Dental Treatment , 1981, Journal of dental research.

[50]  R. Kusy,et al.  Effects of composition and cross section on the elastic properties of orthodontic wires. , 2009, The Angle orthodontist.

[51]  D. Maroso,et al.  A preliminary study of wear of porcelain when subjected to functional movements of retentive clasp arms. , 1981, The Journal of prosthetic dentistry.

[52]  S. Handelman,et al.  Use of adhesive sealants over occlusal carious lesions: radiographic evaluation. , 1981, Community dentistry and oral epidemiology.

[53]  J. Brudvik,et al.  Stress-relaxation testing. Part III: Influence of wire alloys, gauges, and lengths on clasp behavior. , 1981, The Journal of prosthetic dentistry.

[54]  J I Nicholls,et al.  A study of the flexibility of wrought wire clasps. , 1981, The Journal of prosthetic dentistry.

[55]  B. Norling,et al.  Fracture resistance of mandibular molars with occlusal class I amalgam preparations. , 1981, Journal of the American Dental Association.

[56]  G. Baran,et al.  Forming of Cast Precious Metal Alloys , 1981, Journal of dental research.

[57]  J. Martinoff,et al.  An 18-month clinical evaluation of semiprecious and nonprecious alloy restorations. , 1981, The Journal of prosthetic dentistry.

[58]  G. Andreasen,et al.  Surface corrosion of nitinol and stainless steel under clinical conditions. , 1981, The Angle orthodontist.

[59]  A M Lacy,et al.  Time-dependent accuracy of elastomer impression materials. Part I: Condensation silicones. , 1981, The Journal of prosthetic dentistry.

[60]  N. Waters.  An Improved Method for the Yield in Bending of Straight Orthodontic Wires , 1981, British journal of orthodontics.

[61]  T. Dérand.  Residual stresses in metal-ceramic crowns. , 1981, Journal of oral rehabilitation.

[62]  A Rihani,et al.  Pressures involved in making upper edentulous impressions. , 1981, The Journal of prosthetic dentistry.

[63]  D. O'Neil,et al.  An experimental evaluation of endodontic procedures and filling materials. , 1981, Oral surgery, oral medicine, and oral pathology.

[64]  D. Brune.  Corrosion of amalgams. , 1981, Scandinavian journal of dental research.

[65]  W F Malone,et al.  Accuracy and dimensional stability of four interocclusal recording materials. , 1981, The Journal of prosthetic dentistry.

[66]  N. Sarkar,et al.  Strengthening mechanism of bonded alumina crowns. , 1981, The Journal of prosthetic dentistry.

[67]  K. Anusavice,et al.  A Thermal Shock Test for Porcelain-Metal Systems , 1981, Journal of dental research.

[68]  W. Sulik,et al.  Surface finishing of dental porcelain. , 1981, The Journal of prosthetic dentistry.

[69]  A. J. Goldberg,et al.  Flexure Modulus of Orthodontic Stainless Steel Wires , 1981, Journal of dental research.

[70]  J. A. Stackhouse.  Impression materials and electrodeposits. Part II: Electrodeposits. , 1981, The Journal of prosthetic dentistry.

[71]  M. Torabinejad,et al.  The biocompatibility of some root canal medicaments and irrigants. , 1981, International endodontic journal.

[72]  D. Smith,et al.  A 5-year clinical evaluation of the effectiveness of a fissure sealant in mentally retarded Canadian children. , 1981, Community dentistry and oral epidemiology.

[73]  J. K. Harcourt,et al.  Working and setting times of root canal sealants determined by the oscillating rheometer. , 1981, Australian dental journal.

[74]  W. H. Bowles.  Quantitation of colorimetric reaction for determination of gamma 2 phase in dental amalgam. , 1981, The Journal of prosthetic dentistry.

[75]  A. Prasad,et al.  In vitro corrosion and tarnish characterization of typical dental gold compositions. , 1981, Journal of biomedical materials research.

[76]  J. E. Hutton,et al.  A comparison of three techniques for fabricating metal molds. , 1981, The Journal of prosthetic dentistry.

[77]  Y Kinouchi,et al.  Pd-Co Dental Casting Ferromagnetic Alloys , 1981, Journal of dental research.

[78]  B R Gillings,et al.  Magnetic retention for complete and partial overdentures. Part I. , 1981, The Journal of prosthetic dentistry.

[79]  P. Swango,et al.  Evaluation of the retention of two types of pit and fissure sealants. , 1981, Community dentistry and oral epidemiology.

[80]  J. E. Brooks,et al.  A comparative study of two pit and fissure sealants: results after 4 1/2 years in Augusta, Ga. , 1981, Journal of the American Dental Association.

[81]  K. Anusavice,et al.  Porcelain-Metal Thermal Compatibility , 1981, Journal of dental research.

[82]  J. Powers,et al.  Surface mechanical properties of stone, resin, and metal dies. , 1981, Journal of the American Dental Association.

[83]  A. Wennberg,et al.  Cytotoxicity evaluation of temporary filling materials. , 1981, International endodontic journal.

[84]  A. Caputo,et al.  Type III gold alloy complete crowns cast in a phosphate-bonded investment. , 1981, The Journal of prosthetic dentistry.

[85]  C. Shen,et al.  Effect of K2SO4 and CaSO4 Dihydrate Solutions on Crystallization and Strength of Gypsum , 1981, Journal of dental research.

[86]  K. Yasuda,et al.  Determination of the AuCu Superlattice Formation Region in Gold-Copper-Silver Ternary System , 1981, Journal of dental research.

[87]  D. Appleby,et al.  The combined reversible hydrocolloid/irreversible hydrocolloid impression system: clinical application. , 1981, The Journal of prosthetic dentistry.

[88]  R. W. Cannon,et al.  Alloys for crown and bridgework. , 1981, Australian dental journal.

[89]  N. Sarkar.  SEM and x-ray microanalysis of in vitro corrosion of a copper-zinc alloy. , 1981, The Journal of prosthetic dentistry.

[90]  H F Morris,et al.  Stress-relaxation testing. Part I: A new approach to the testing of removable partial denture alloys, wrought wires, and clasp behavior. , 1981, The Journal of prosthetic dentistry.

[91]  L Gettleman,et al.  Effect of internal relief, vibration, and venting on the vertical seating of cemented crowns. , 1981, The Journal of prosthetic dentistry.

[92]  W. H. Bowles.  Modification of a simple method for determination of gamma-2 phase of dental amalgam. , 1982, The Journal of prosthetic dentistry.

[93]  R. Wever,et al.  Thiocyanate as a Cofactor in Myeloperoxidase Activity Against Streptococcus mutans , 1981, Journal of dental research.

[94]  L. Spångberg.  In vitro assessment of the toxicity of endodontic materials. , 1981, International endodontic journal.

[95]  S Matsuya,et al.  Decomposition of Gypsum Bonded Investments , 1981, Journal of dental research.

[96]  A. Tveit,et al.  Fluoride uptake by cavity walls from a fluoride-containing amalgam in vitro. An electron microprobe analysis. , 1981, Acta odontologica Scandinavica.

[97]  Z Khan,et al.  Impressions of unsupported movable tissues. , 1981, Journal of the American Dental Association.

[98]  A M Lacy,et al.  Time-dependent accuracy of elastomer impression materials. Part II: Polyether, polysulfides, and polyvinylsiloxane. , 1981, The Journal of prosthetic dentistry.

[99]  F. Goldberg.  Relation between corroded silver points and endodontic failures. , 1981, Journal of endodontics.

[100]  G. B. Pelleu,et al.  A comparative study of the centrifugal and vacuum-pressure techniques of casting removable partial denture frameworks. , 1981, The Journal of prosthetic dentistry.

[101]  H. B. Schwartz,et al.  Linear dimensional accuracy of epoxy resin and stone dies. , 1981, The Journal of prosthetic dentistry.

[102]  Retief Dh,et al.  Evaluation of two pit and fissure sealants: an in vitro study. , 1981 .

[103]  A. Grant,et al.  The use of magnetic forces in prosthetic dentistry. , 1981, Journal of dentistry.