Self-commissioning of flux linkage curves of synchronous reluctance machines in quasi-standstill condition

This study presents a self-commissioning procedure for the estimation of the flux linkage curves of synchronousreluctance machines. The procedure exploits a quasi-standstill condition obtained by i ...

[1]  A. Hamler,et al.  Analysis of iron loss in interior permanent magnet synchronous motor over a wide-speed range of constant output power operation , 2000 .

[2]  Nicola Bianchi,et al.  Analysis and Tests of the Sensorless Rotor Position Detection of Ringed-Pole Permanent-Magnet Motor , 2014, IEEE Transactions on Industry Applications.

[3]  Seung-Ki Sul,et al.  Inverter output voltage synthesis using novel dead time compensation , 1996 .

[4]  Alberto Tenconi,et al.  Identification of the Magnetic Model of Permanent-Magnet Synchronous Machines Using DC-Biased Low-Frequency AC Signal Injection , 2015, IEEE Transactions on Industry Applications.

[5]  D. Dolinar,et al.  Cross magnetization effect on inductances of linear synchronous reluctance motor under load conditions , 2001 .

[6]  Emil Levi,et al.  Iron loss in rotor-flux-oriented induction machines: identification, assessment of detuning, and compensation , 1996 .

[7]  G. Stumberger,et al.  Analyzing the Magnetic Flux Linkage Characteristics of Alternating Current Rotating Machines by Experimental Method , 2011, IEEE Transactions on Magnetics.

[8]  P. Landsmann,et al.  Q-axis pulse based identification of the anisotropy displacement over load for surface mounted PMSM , 2013, 2013 IEEE International Symposium on Sensorless Control for Electrical Drives and Predictive Control of Electrical Drives and Power Electronics (SLED/PRECEDE).

[9]  Bernhard Piepenbreier,et al.  Identification of high frequency resistances and inductances for sensorless control of PMSM , 2013, 2013 IEEE International Symposium on Sensorless Control for Electrical Drives and Predictive Control of Electrical Drives and Power Electronics (SLED/PRECEDE).

[10]  Tomonobu Senjyu,et al.  A novel calculation method for iron loss resistance suitable in modeling permanent-magnet synchronous motors , 2002 .

[11]  Jin Xu,et al.  Self-Commissioning of Permanent Magnet Synchronous Machine Drives at Standstill Considering Inverter Nonlinearities , 2014, IEEE Transactions on Power Electronics.

[12]  R. Kennel,et al.  The influence of magnetic hysteresis on HF injection based inductance calculation , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[13]  Ralph Kennel,et al.  Analysis of losses in a novel IPMSM resulting from high-frequency injection for sensorless control , 2013, 2013 IEEE International Symposium on Sensorless Control for Electrical Drives and Predictive Control of Electrical Drives and Power Electronics (SLED/PRECEDE).

[14]  Nicola Bianchi,et al.  High frequency d-q model of synchronous machines for sensorless control , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

[15]  M. Zigliotto,et al.  Estimation of the direct-axis inductance in PM synchronous motor drives at standstill , 2013, 2013 IEEE International Conference on Industrial Technology (ICIT).

[16]  Gianmario Pellegrino,et al.  Experimental Identification of the Magnetic Model of Synchronous Machines , 2013, IEEE Transactions on Industry Applications.

[17]  A. Boglietti,et al.  Experimental High-Frequency Parameter Identification of AC Electrical Motors , 2007, IEEE Transactions on Industry Applications.

[18]  Chris Gerada,et al.  Self-Commissioning of Interior Permanent- Magnet Synchronous Motor Drives With High-Frequency Current Injection , 2014 .

[19]  M. M. Radulescu,et al.  Equivalent core-loss resistance identification for interior permanent-magnet synchronous machines , 2012, 2012 XXth International Conference on Electrical Machines.

[20]  Sascha Kuehl,et al.  Measuring Magnetic Characteristics of Synchronous Machines by Applying Position Estimation Techniques , 2014, IEEE Transactions on Industry Applications.

[21]  K. Uezato,et al.  Parameter measurement for PMSM using adaptive identification , 2002, Industrial Electronics, 2002. ISIE 2002. Proceedings of the 2002 IEEE International Symposium on.

[22]  E. G. Strangas,et al.  A simplified characterization method including saturation effects for permanent magnet Machines , 2012, 2012 XXth International Conference on Electrical Machines.

[23]  M. Trlep,et al.  Evaluation of saturation and cross-magnetization effects in interior permanent magnet synchronous motor , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[24]  Thomas M. Jahns,et al.  Magnetic Model Self-Identification for PM Synchronous Machine Drives , 2014 .

[25]  Tomonobu Senjyu,et al.  Relationship of parallel model and series model for PMSM including iron loss , 2001, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230).

[26]  Jorge G. Cintron-Rivera,et al.  Evaluation of a Parameter Identification Method for Permanent Magnet AC Machines Through Parametric Sensitivity Analysis , 2014, IEEE Transactions on Energy Conversion.

[27]  G. Stumberger,et al.  Experimental Method for Determining Magnetically Nonlinear Characteristics of Electric Machines With Magnetically Nonlinear and Anisotropic Iron Core, Damping Windings, and Permanent Magnets , 2008, IEEE Transactions on Magnetics.

[28]  A. Dittrich.  Model based identification of the iron loss resistance of an induction machine , 1998 .