Interface and bonding mechanisms of plant fibre composites: An overview
暂无分享,去创建一个
Mizi Fan | Lihui Chen | Yonghui Zhou | Lihui Chen | M. Fan | Yonghui Zhou
[1] J. Prachayawarakorn,et al. Effect of jute and kapok fibers on properties of thermoplastic cassava starch composites , 2013 .
[2] Kaewta Kaewtatip,et al. Studies on the structure and properties of thermoplastic starch/luffa fiber composites , 2012 .
[3] D. Gardner,et al. Forced Air Plasma Treatment (FAPT) of Hybrid Wood Plastic Composite (WPC)–Fiber Reinforced Plastic (FRP) Surfaces , 2009 .
[4] M. Masuelli. Fiber Reinforced Polymers - The Technology Applied for Concrete Repair , 2013 .
[5] H. Ismail,et al. Rice husk powder–filled polystyrene/styrene butadiene rubber blends , 2004 .
[6] Shinji Ochi,et al. Mechanical properties of kenaf fibers and kenaf/PLA composites , 2008 .
[7] Mohini Sain,et al. Interface Modification and Mechanical Properties of Natural Fiber-Polyolefin Composite Products , 2005 .
[8] A. J. Michell,et al. Future prospects for wood cellulose as reinforcement in organic polymer composites , 1989 .
[9] Sabu Thomas,et al. Oil Palm Fibre Reinforced Phenol Formaldehyde Composites: Influence of Fibre Surface Modifications on the Mechanical Performance , 2000 .
[10] M. Tavares,et al. Solid-state nuclear magnetic resonance study of polyurethane/natural fibers composites , 2002 .
[11] J. Covas,et al. Development of polyhydroxyalkanoate/beer spent grain fibers composites for film blowing applications , 2015 .
[12] M. Ragoubi,et al. Effect of corona discharge treatment on mechanical and thermal properties of composites based on miscanthus fibres and polylactic acid or polypropylene matrix , 2012 .
[13] J. Madaan,et al. Tribological behavior of natural fiber reinforced PLA composites , 2013 .
[14] Chin-San Wu. Preparation, characterization and biodegradability of crosslinked tea plant-fibre-reinforced polyhydroxyalkanoate composites , 2013 .
[15] A. J. Carvalho,et al. Natural fiber-reinforced thermoplastic starch composites obtained by melt processing , 2012 .
[16] Yong K Kim,et al. Effect of surface treatment and Z-axis reinforcement on the interlaminar fracture of jute/epoxy laminated composites , 2013 .
[17] S. Boufi,et al. Effect of silane coupling agents on the properties of pine fibers/polypropylene composites , 2007 .
[18] G. Pharr,et al. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .
[19] Hota V. S. GangaRao,et al. Critical review of recent publications on use of natural composites in infrastructure , 2012 .
[20] A. J. Carvalho,et al. Thermoplastic starch–cellulosic fibers composites: preliminary results , 2001 .
[21] K. Satyanarayana,et al. Biodegradable composites based on lignocellulosic fibers—An overview , 2009 .
[22] H. P. S. Abdul Khalil,et al. Effect of acetylation and coupling agent treatments upon biological degradation of plant fibre reinforced polyester composites , 2000 .
[23] A. Błędzki,et al. Composites reinforced with cellulose based fibres , 1999 .
[24] Alain Dufresne,et al. Cassava bagasse cellulose nanofibrils reinforced thermoplastic cassava starch , 2009 .
[25] B. F. Yousif,et al. A review on the degradability of polymeric composites based on natural fibres , 2013 .
[26] M. A. Khan,et al. Improvement of Mechanical Properties of Jute Fibers-Polyethylene/Polypropylene Composites: Effect of Green Dye and UV Radiation , 2009 .
[27] I. Avramova,et al. Wood flour: New filler for the rubber processing industry. IV. Cure characteristics and mechanical properties of natural rubber compounds filled by non-modified or corona treated wood flour , 2006 .
[28] M.O.W. Richardson,et al. The low velocity impact response of non-woven hemp fibre reinforced unsaturated polyester composites , 2007 .
[29] R. Khan,et al. A Comparative Study between Gamma and UV Radiation of Jute fabrics/Polypropylene Composites: Effect of Starch , 2010 .
[30] D. Hui,et al. Effects of modifications of bamboo cellulose fibers on the improved mechanical properties of cellulose reinforced poly(lactic acid) composites , 2014 .
[31] S. Kalia,et al. Pretreatments of Natural Fibers and their Application as Reinforcing Material in Polymer Composites—A Review , 2009 .
[32] J. Gassan,et al. Effects of corona discharge and UV treatment on the properties of jute-fibre epoxy composites , 2000 .
[33] Maya Jacob John,et al. Biofibres and Biocomposites , 2008 .
[34] H. Hamada,et al. Impact Property of Flexible Epoxy Treated Natural Fiber Reinforced PLA Composites , 2013 .
[35] M. Zehetbauer,et al. Analysis of strain bursts during nanoindentation creep of high-density polyethylene , 2015 .
[36] Rahul Bhardwaj,et al. Renewable resource-based green composites from recycled cellulose fiber and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) bioplastic. , 2006, Biomacromolecules.
[37] H. Hwang,et al. Optimization of submerged culture conditions for mycelial growth and exo-biopolymer production by Paecilomyces tenuipes C240 , 2003 .
[38] Md. Abul Hossain,et al. Effect of gamma radiation on the performance of jute fabrics-reinforced polypropylene composites , 2009 .
[39] M. Ansell,et al. Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization , 2002 .
[40] P. Dineff,et al. Wood flour: A new filler for the rubber processing industry. II. Cure characteristics and mechanical properties of NBR compounds filled with corona‐treated wood flour , 2004 .
[41] M. Sarıkanat,et al. The effect of argon and air plasma treatment of flax fiber on mechanical properties of reinforced polyester composite , 2016 .
[42] Yulin Deng,et al. Nanoindentation study of individual cellulose nanowhisker-reinforced PVA electrospun fiber , 2013, Polymer Bulletin.
[43] S. Mohanty,et al. Interfacial, dynamic mechanical, and thermal fiber reinforced behavior of MAPE treated sisal fiber reinforced HDPE composites , 2006 .
[44] R. Krishnaprasad,et al. Mechanical and Thermal Properties of Bamboo Microfibril Reinforced Polyhydroxybutyrate Biocomposites , 2009 .
[45] Sabu Thomas,et al. Water sorption in oil palm fiber reinforced phenol formaldehyde composites , 2002 .
[46] Yunxuan Weng,et al. Characterization of interfacial compatibility of polylactic acid and bamboo flour (PLA/BF) in biocomposites , 2014 .
[47] Hao Wang,et al. Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview , 2012 .
[48] S. Mohanty,et al. Effect of MAPP as Coupling Agent on the Performance of Sisal–PP Composites , 2004 .
[49] M. Paoli,et al. Thermal properties of high density polyethylene composites with natural fibres : Coupling agent effect , 2008 .
[50] H. Bader,et al. Influence of natural fibres on the mechanical properties of biodegradable polymers. , 1998 .
[51] P. Perré,et al. Effects of wood fiber surface chemistry on strength of wood–plastic composites , 2015 .
[52] E. Thostenson,et al. Multi-scale hybrid biocomposite: Processing and mechanical characterization of bamboo fiber reinforced PLA with microfibrillated cellulose , 2009 .
[53] A. Heredia,et al. Phase transitions in the biopolyester cutin isolated from tomato fruit cuticles , 2004 .
[54] R. Khan,et al. Effect of Gamma Radiation on the Physico-Mechanical and Electrical Properties of Jute Fiber-Reinforced Polypropylene Composites , 2009 .
[55] Qinglin Wu,et al. Chemical Coupling in Wood Fiber and Polymer Composites: A Review of Coupling Agents and Treatments , 2000 .
[56] Z. Zhang,et al. Effect of γ irradiation on the properties of basalt fiber reinforced epoxy resin matrix composite , 2015 .
[57] M. Ragoubi,et al. Impact of corona treated hemp fibres onto mechanical properties of polypropylene composites made thereof , 2010 .
[58] J. Móczó,et al. PLA/lignocellulosic fiber composites: Particle characteristics, interfacial adhesion, and failure mechanism , 2014 .
[59] J. Prachayawarakorn,et al. Properties of thermoplastic rice starch composites reinforced by cotton fiber or low-density polyethylene , 2010 .
[60] P. Chang,et al. Bamboo fiber and its reinforced composites: structure and properties , 2012, Cellulose.
[61] L. Tabil,et al. Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review , 2007 .
[62] B. Wang,et al. Pre-treatment of Flax Fibers for use in Rotationally Molded Biocomposites , 2007 .
[63] R. Ayad,et al. Effect of alkali treatment on Alfa fibre as reinforcement for polypropylene based eco-composites: Mechanical behaviour and water ageing , 2015 .
[64] Luiz Pereira Ramos,et al. Studies of the processing and characterization of corn starch and its composites with banana and sugarcane fibers from Brazil. , 2010 .
[65] R. Reis,et al. Hybrid cork-polymer composites containing sisal fibre : morphology, effect of the fibre treatment on the mechanical properties and tensile failure prediction , 2013 .
[66] S. Mukhopadhyay,et al. Interface Behavior in Polypropylene Composites , 2003 .
[67] R. Långström,et al. UV aging of poly(propylene)/wood‐fiber composites , 2004 .
[68] B. Kokta,et al. Compounding of cellulose fibers with polypropylene: Effect of fiber treatment on dispersion in the polymer matirx , 1989 .
[69] G. Pharr,et al. Nanoindentation of juvenile and mature loblolly pine (Pinus taeda L.) wood fibers as affected by thermomechanical refining pressure , 2009, Wood Science and Technology.
[70] A. Kelly,et al. Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenum , 1965 .
[71] Manjusri Misra,et al. Surface modifications of natural fibers and performance of the resulting biocomposites: An overview , 2001 .
[72] M. Wolcott,et al. Study of the Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/Cellulose Nanowhisker Composites Prepared by Solution Casting and Melt Processing , 2008 .
[73] S. Bai,et al. Viscoelastic properties of wood materials characterized by nanoindentation experiments , 2012, Wood Science and Technology.
[74] M. Wolcott,et al. Production of natural fiber reinforced thermoplastic composites through the use of polyhydroxybutyrate-rich biomass. , 2008, Bioresource technology.
[75] Timothy G. Rials,et al. Nanoindentation of wood cell walls: Continuous stiffness and hardness measurements , 2007 .
[76] Sabu Thomas,et al. A review on interface modification and characterization of natural fiber reinforced plastic composites , 2001 .
[77] P. Hatcher,et al. Evidence for cross-linking in tomato cutin using HR-MAS NMR spectroscopy. , 2003, Phytochemistry.
[78] Selvin P. Thomas,et al. Effect of fibre length and chemical modifications on the tensile properties of intimately mixed short sisal/glass hybrid fibre reinforced low density polyethylene composites , 2004 .
[79] A. Błędzki,et al. Wood-filled thermoplastic composites , 1998 .
[80] Z. Cai,et al. Evaluation of elastic modulus and hardness of crop stalks cell walls by nano-indentation. , 2010, Bioresource technology.
[81] Lihui Chen,et al. Lignocellulosic fibre mediated rubber composites: An overview , 2015 .
[82] K. Kurita. Controlled functionalization of the polysaccharide chitin , 2001 .
[83] Nuno Calçada Loureiro,et al. Development of polyhydroxyalkanoates/poly(lactic acid) composites reinforced with cellulosic fibers , 2014 .
[84] K. Réczey,et al. Reducing water absorption in compostable starch-based plastics , 2005 .
[85] K. Ahmed,et al. Reinforcement of natural rubber hybrid composites based on marble sludge/Silica and marble sludge/rice husk derived silica , 2013, Journal of advanced research.
[86] M. John,et al. Recent Developments in Chemical Modification and Characterization of Natural Fiber-Reinforced Composites , 2008 .
[87] Huining Xiao,et al. Hydrophobic-modified nano-cellulose fiber/PLA biodegradable composites for lowering water vapor transmission rate (WVTR) of paper. , 2014, Carbohydrate polymers.
[88] A. Mohanty,et al. Wood fiber reinforced bacterial bioplastic composites: Fabrication and performance evaluation , 2007 .
[89] M. Kodal,et al. Dual effect of chemical modification and polymer precoating of flax fibers on the properties of short flax fiber/poly(lactic acid) composites , 2015 .
[90] I. Verpoest,et al. Understanding the interfacial compatibility and adhesion of natural coir fibre thermoplastic composites , 2013 .
[91] Anupama Kaushik,et al. Green nanocomposites based on thermoplastic starch and steam exploded cellulose nanofibrils from wheat straw , 2010 .
[92] I. Mondragon,et al. Effects of fibre treatment on wettability and mechanical behaviour of flax/polypropylene composites , 2003 .
[93] W. Glasser,et al. Fiber‐reinforced cellulosic thermoplastic composites , 1999 .
[94] J. Jog,et al. Natural fiber polymer composites: A review , 1999 .
[95] A. Mamun,et al. The effects of acetylation on properties of flax fibre and its polypropylene composites , 2008 .
[96] S. Mohanty,et al. Dynamic mechanical and thermal properties of MAPE treated jute/HDPE composites , 2006 .
[97] A. V. R. Prasad,et al. Tensile Properties of Successive Alkali Treated Short Jute Fiber Reinforced PLA Composites , 2014 .
[98] A. Heredia,et al. Biophysical and biochemical characteristics of cutin, a plant barrier biopolymer. , 2003, Biochimica et biophysica acta.
[99] Sabu Thomas,et al. The role of interfacial interactions on the mechanical properties of banana fibre reinforced phenol formaldehyde composites , 2005 .
[100] K. Pickering. Properties and performance of natural-fibre composites , 2008 .
[101] A. Gibson,et al. Mechanical properties of Napier grass fibre/polyester composites , 2016 .
[102] B. F. Yousif,et al. The effects of alkali treatment on the interfacial adhesion of bamboo fibres , 2010 .
[103] G. Marosi,et al. Flax fibre reinforced PLA/TPS biocomposites flame retarded with multifunctional additive system , 2014 .
[104] A. Rana,et al. Effect of alkali treated jute fibres on composite properties , 2001 .
[105] P. Dineff,et al. Wood flour: A new filler for the rubber processing industry.III: Cure characteristics and mechanical properties of nitrile butadiene rubber compounds filled by wood flour in the presence of phenol-formaldehyde resin , 2004 .
[106] Zachary C. Wright,et al. Mechanisms and impact of fiber–matrix compatibilization techniques on the material characterization of PHBV/oak wood flour engineered biobased composites , 2012 .
[107] Jin Kuk Kim,et al. Recent Advances in the Processing of Wood-Plastic Composites , 2010 .
[108] Sabu Thomas,et al. Effect of chemical treatment on the tensile properties of short sisal fibre-reinforced polyethylene composites , 1996 .
[109] Smita Mohanty,et al. Effect of MAPP as a Coupling Agent on the Performance of Jute–PP Composites , 2004 .
[110] E. Mäder,et al. Jute fibre/epoxy composites: Surface properties and interfacial adhesion , 2012 .
[111] V. S. Prasad,et al. The thermal and crystallisation studies of short sisal fibre reinforced polypropylene composites , 2003 .
[112] Stefanie Feih,et al. Testing Procedure for the Single Fiber Fragmentation Test , 2004 .
[113] G. J. Cruz,et al. Plasma modification of cellulose fibers for composite materials , 2006 .
[114] John G. Lyons,et al. Mechanical and biodegradation performance of short natural fibre polyhydroxybutyrate composites , 2013 .
[115] C. Hill,et al. Silane coupling agents used for natural fiber/polymer composites: A review , 2010 .
[116] John S. Villarrubia,et al. Nanoindentation of Polymers: An Overview | NIST , 2001 .
[117] W. Gindl,et al. Nanoindentation of regenerated cellulose fibres , 2006 .
[118] L L.T.DRZA,et al. Fibre-matrix adhesion and its relationship to composite mechanical properties , 2022 .
[119] Haitao Xu,et al. Evaluation of interphase properties in a cellulose fiber-reinforced polypropylene composite by nanoindentation and finite element analysis , 2007 .
[120] Manjusri Misra,et al. Wood-fiber-reinforced poly(lactic acid) composites: Evaluation of the physicomechanical and morphological properties , 2006 .
[121] R. Shanks,et al. Composition, structure and thermal degradation of hemp cellulose after chemical treatments , 2005 .
[122] Y. Seki. Innovative multifunctional siloxane treatment of jute fiber surface and its effect on the mechanical properties of jute/thermoset composites , 2009 .
[123] Ajit K. Roy,et al. Engineered interfaces in fiber reinforced composites , 1999 .
[124] G. Unnikrishnan,et al. Dielectric properties of short sisal/coir hybrid fibre reinforced natural rubber composites , 2007 .
[125] Chul B. Park,et al. Development of PLA/cellulosic fiber composite foams using injection molding: Crystallization and foaming behaviors , 2016 .
[126] J. Balatinecz,et al. Surface modification and adhesion mechanisms in woodfiber-polypropylene composites , 1999 .
[127] Zhongyi Zhang,et al. Effects of water immersion ageing on the mechanical properties of flax and jute fibre biocomposites evaluated by nanoindentation and flexural testing , 2014 .
[128] Vera A. Alvarez,et al. Thermal degradation of cellulose derivatives/starch blends and sisal fibre biocomposites , 2004 .
[129] Smita Mohanty,et al. Effect of surface treatments of banana fiber on mechanical, thermal, and biodegradability properties of PLA/banana fiber biocomposites , 2011 .
[130] M. Fan,et al. The influence of Spartium junceum L. fibres modified with montmorrilonite nanoclay on the thermal properties of PLA biocomposites , 2015 .
[131] W. Hall,et al. A review of bast fibres and their composites. Part 1 – Fibres as reinforcements , 2010 .
[132] Libo Yan,et al. Flax fibre and its composites – A review , 2014 .
[133] A. Mohanty,et al. Surface modification of jute and its influence on performance of biodegradable jute-fabric/Biopol composites , 2000 .