Concurrent Estimation of Finger Flexion and Extension Forces Using Motoneuron Discharge Information

Objective: A reliable neural-machine interface offers the possibility of controlling advanced robotic hands with high dexterity. The objective of this study was to develop a decoding method to estimate flexion and extension forces of individual fingers concurrently. Methods: First, motor unit (MU) firing information was identified through surface electromyogram (EMG) decomposition, and the MUs were further categorized into different pools for the flexion and extension of individual fingers via a refinement procedure. MU firing rate at the populational level was calculated, and the individual finger forces were then estimated via a bivariate linear regression model (neural-drive method). Conventional EMG amplitude-based method was used as a comparison. Results: Our results showed that the neural-drive method had a significantly better performance (lower estimation error and higher correlation) compared with the conventional method. Conclusion: Our approach provides a reliable neural decoding method for dexterous finger movements. Significance: Further exploration of our method can potentially provide a robust neural-machine interface for intuitive control of robotic hands.

[1]  Chenyun Dai,et al.  Independent component analysis based algorithms for high-density electromyogram decomposition: Systematic evaluation through simulation , 2019, Comput. Biol. Medicine.

[2]  Joshua C Kline,et al.  Motor unit drive: a neural interface for real-time upper limb prosthetic control , 2018, Journal of neural engineering.

[3]  Sergei Vassilvitskii,et al.  k-means++: the advantages of careful seeding , 2007, SODA '07.

[4]  C. D. De Luca,et al.  Myoelectrical manifestations of localized muscular fatigue in humans. , 1984, Critical reviews in biomedical engineering.

[5]  Yang Zheng,et al.  Interference Removal From Electromyography Based on Independent Component Analysis , 2019, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[6]  W. Rymer,et al.  Extracting extensor digitorum communis activation patterns using high-density surface electromyography , 2015, Front. Physiol..

[7]  David Tinoco Varela,et al.  Characterized Bioelectric Signals by Means of Neural Networks and Wavelets to Remotely Control a Human-Machine Interface , 2019, Sensors.

[8]  Robert D. Lipschutz,et al.  Targeted muscle reinnervation for real-time myoelectric control of multifunction artificial arms. , 2009, JAMA.

[9]  Bo Tao,et al.  Intelligent Human-Computer Interaction Based on Surface EMG Gesture Recognition , 2019, IEEE Access.

[10]  Xiaogang Hu,et al.  Real-time isometric finger extension force estimation based on motor unit discharge information , 2019, Journal of neural engineering.

[11]  Todd A. Kuiken,et al.  An Analysis of Intrinsic and Extrinsic Hand Muscle EMG for Improved Pattern Recognition Control , 2016, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[12]  Chenyun Dai,et al.  Independent component analysis based algorithms for high-density electromyogram decomposition: Experimental evaluation of upper extremity muscles , 2019, Comput. Biol. Medicine.

[13]  Nurhazimah Nazmi,et al.  A Review of Classification Techniques of EMG Signals during Isotonic and Isometric Contractions , 2016, Sensors.

[14]  Chenyun Dai,et al.  Finger Joint Angle Estimation Based on Motoneuron Discharge Activities , 2020, IEEE Journal of Biomedical and Health Informatics.

[15]  F. Bojsen-Møller,et al.  Antagonist muscle coactivation during isokinetic knee extension , 2000, Scandinavian journal of medicine & science in sports.

[16]  Miguel A. L. Nicolelis,et al.  Brain–machine interfaces: past, present and future , 2006, Trends in Neurosciences.

[17]  Dario Farina,et al.  Man/machine interface based on the discharge timings of spinal motor neurons after targeted muscle reinnervation , 2017, Nature Biomedical Engineering.

[18]  R. Enoka,et al.  Detecting the unique representation of motor-unit action potentials in the surface electromyogram. , 2008, Journal of neurophysiology.

[19]  Yingchun Zhang,et al.  Surface EMG Decomposition Based on K-means Clustering and Convolution Kernel Compensation , 2015, IEEE Journal of Biomedical and Health Informatics.

[20]  Dario Farina,et al.  Predicting wrist kinematics from motor unit discharge timings for the control of active prostheses , 2019, Journal of NeuroEngineering and Rehabilitation.

[21]  O. Stavdahl,et al.  Control of Upper Limb Prostheses: Terminology and Proportional Myoelectric Control—A Review , 2012, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[22]  Guido Bugmann,et al.  Classification of Finger Movements for the Dexterous Hand Prosthesis Control With Surface Electromyography , 2013, IEEE Journal of Biomedical and Health Informatics.

[23]  Ping Zhou,et al.  A Novel Framework Based on FastICA for High Density Surface EMG Decomposition , 2016, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[24]  Dario Farina,et al.  Decoding Motor Unit Activity From Forearm Muscles: Perspectives for Myoelectric Control , 2018, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[25]  Chenyun Dai,et al.  Prediction of Individual Finger Forces Based on Decoded Motoneuron Activities , 2019, Annals of Biomedical Engineering.

[26]  Yang Zheng,et al.  Estimation of Muscle Force Based on Neural Drive in a Hemispheric Stroke Survivor , 2018, Front. Neurol..