A New Fault Diagnosis Method Based on Attributes Weighted Neutrosophic Set

Fault diagnosis is an extensively applied issue to monitor condition and diagnose fault for safe and stable operation of the machine, which started to develop during the industrial revolution and contains various theories and technologies. Due to the growing complexity of contributing factors of a fault and the correlation of fault attributes which are often interrelated, traditional fault diagnosis methods fail to handle with this complex condition. To solve this problem, a new fault diagnosis method based on attributes weighted neutrosophic set is proposed in this paper. In the proposed approach, a attributes weighted model is developed to obtain the weights of attributes by the fault information. For a sample whose fault type is unknown, the neutrosophic set generated from the fault sample data are aggregated via the single valued neutrosophic power weighted averaging (SVNPWA) operator with the obtained attributes weights, then, the fault diagnosis results could be determined by the defuzzification method of fused neutrosophic set. This proposed method have capacity to differentiate the individual impact of attributes and handle the uncertain problems in the process of fault diagnosis. Finally, an illustrative example was provided to demonstrate the reasonableness and effectiveness of the proposed method.

[1]  Mariusz Zieja,et al.  Vibroacoustic technique for the fault diagnosis in a gear transmission of a military helicopter , 2017 .

[2]  Fuyuan Xiao,et al.  A Hybrid Fuzzy Soft Sets Decision Making Method in Medical Diagnosis , 2018, IEEE Access.

[3]  Fuyuan Xiao,et al.  Multi-sensor data fusion based on the belief divergence measure of evidences and the belief entropy , 2019, Inf. Fusion.

[4]  Rajshekhar Sunderraman,et al.  Single Valued Neutrosophic Sets , 2010 .

[5]  Wen Jiang,et al.  A Novel Single-Valued Neutrosophic Set Similarity Measure and Its Application in Multicriteria Decision-Making , 2017, Symmetry.

[6]  Enrico Zio,et al.  Artificial intelligence for fault diagnosis of rotating machinery: A review , 2018, Mechanical Systems and Signal Processing.

[7]  Jinya Su,et al.  Model-Based Fault Diagnosis System Verification Using Reachability Analysis , 2019, IEEE Transactions on Systems, Man, and Cybernetics: Systems.

[8]  Lee Li,et al.  An integrated method of set pair analysis and association rule for fault diagnosis of power transformers , 2015, IEEE Transactions on Dielectrics and Electrical Insulation.

[9]  Xinyang Deng,et al.  D number theory based game-theoretic framework in adversarial decision making under a fuzzy environment , 2019, Int. J. Approx. Reason..

[10]  Jing Wang,et al.  Multi-valued Neutrosophic Sets and Power Aggregation Operators with Their Applications in Multi-criteria Group Decision-making Problems , 2015, Int. J. Comput. Intell. Syst..

[11]  José Machado da Silva,et al.  Fault Diagnosis in Highly Dependable Medical Wearable Systems , 2016, J. Electron. Test..

[12]  Shanlin Yang,et al.  Selecting strategic partner for tax information systems based on weight learning with belief structures , 2019, Int. J. Approx. Reason..

[13]  Lingwei Kong,et al.  Misfire Fault Diagnosis Method of Gasoline Engines Using the Cosine Similarity Measure of Neutrosophic Numbers , 2015 .

[14]  Chunfang Liu,et al.  Power aggregation operators of simplified neutrosophic sets and their use in multi-attribute group decision making , 2017, IEEE/CAA Journal of Automatica Sinica.

[15]  Peide Liu,et al.  The Aggregation Operators Based on Archimedean t-Conorm and t-Norm for Single-Valued Neutrosophic Numbers and their Application to Decision Making , 2016, International Journal of Fuzzy Systems.

[16]  Krassimir T. Atanassov,et al.  Intuitionistic fuzzy sets , 1986 .

[17]  Jun Ye,et al.  A multicriteria decision-making method using aggregation operators for simplified neutrosophic sets , 2014, J. Intell. Fuzzy Syst..

[18]  Xi Liu,et al.  The neutrosophic number generalized weighted power averaging operator and its application in multiple attribute group decision making , 2015, International Journal of Machine Learning and Cybernetics.

[19]  I. Turksen.  Interval valued fuzzy sets based on normal forms , 1986 .

[20]  Florentin Smarandache,et al.  An Extended Technique for Order Preference by Similarity to an Ideal Solution (TOPSIS) with Maximizing Deviation Method Based on Integrated Weight Measure for Single-Valued Neutrosophic Sets , 2018, Symmetry.

[21]  Guojing Xu,et al.  A Neutrosophic Approach Based on TOPSIS Method to Image Segmentation , 2018, Int. J. Comput. Commun. Control.

[22]  Arun Kumar Sangaiah,et al.  Medical Diagnosis Based on Single-Valued Neutrosophic Probabilistic Rough Multisets over Two Universes , 2018, Symmetry.

[23]  Xianguo Wu,et al.  Towards a Fuzzy Bayesian Network Based Approach for Safety Risk Analysis of Tunnel‐Induced Pipeline Damage , 2016, Risk analysis : an official publication of the Society for Risk Analysis.

[24]  uan-juan Penga,et al.  An outranking approach for multi-criteria decision-making problems with simplified neutrosophic sets , 2014 .

[25]  Robert LIN,et al.  NOTE ON FUZZY SETS , 2014 .

[26]  Wen Chenglin,et al.  Data Fusion Algorithm of Fault Diagnosis Considering Sensor Measurement Uncertainty , 2013 .

[27]  Jun Ye,et al.  Improved cosine similarity measures of simplified neutrosophic sets for medical diagnoses , 2015, Artif. Intell. Medicine.

[28]  Ahmed Hafaifa,et al.  Fault Diagnosis in Gas Turbine Based on Neural Networks: Vibrations Speed Application , 2017 .

[29]  Jun Ye.  Single valued neutrosophic cross-entropy for multicriteria decision making problems , 2014 .

[30]  Wei Zhong,et al.  Multivariate Statistical Kernel PCA for Nonlinear Process Fault Diagnosis in Military Barracks , 2016 .

[31]  Xiaohong Zhang,et al.  Generalized Interval Neutrosophic Choquet Aggregation Operators and Their Applications , 2018, Symmetry.

[32]  Yong Deng,et al.  Engine fault diagnosis based on sensor data fusion considering information quality and evidence theory , 2018, Advances in Mechanical Engineering.

[33]  Xinyang Deng,et al.  Multi-Attribute Decision Making Method Based on Aggregated Neutrosophic Set , 2019, Symmetry.

[34]  Diyar Akay,et al.  A multi-criteria intuitionistic fuzzy group decision making for supplier selection with TOPSIS method , 2009, Expert Syst. Appl..

[35]  Zhen Wang,et al.  Zero-sum polymatrix games with link uncertainty: A Dempster-Shafer theory solution , 2019, Appl. Math. Comput..

[36]  Jing Fu,et al.  Multi-period medical diagnosis method using a single valued neutrosophic similarity measure based on tangent function , 2015, Comput. Methods Programs Biomed..

[37]  Silvia Liliana Tejada Yepez.  Decision Support Based on Single Valued Neutrosophic Number for Information System Project Selection , 2017 .

[38]  F. Smarandache.  A Unifying Field in Logics: Neutrosophic Logic. , 1999 .

[39]  Wei Qiao,et al.  Bearing Fault Diagnosis for Direct-Drive Wind Turbines via Current-Demodulated Signals , 2013, IEEE Transactions on Industrial Electronics.

[40]  Shanlin Yang,et al.  Multiple criteria group decision making with belief distributions and distributed preference relations , 2019, Eur. J. Oper. Res..

[41]  Hong-yu Zhang,et al.  An Improved Weighted Correlation Coefficient Based on Integrated Weight for Interval Neutrosophic Sets and its Application in Multi-criteria Decision-making Problems , 2015, Int. J. Comput. Intell. Syst..

[42]  Jun Ye,et al.  Single-valued neutrosophic similarity measures based on cotangent function and their application in the fault diagnosis of steam turbine , 2015, Soft Computing.

[43]  Paul M. Frank,et al.  New Developments using AI in Fault Diagnosis , 1996 .

[44]  Peide Liu,et al.  Correlation coefficient of single-valued neutrosophic hesitant fuzzy sets and its applications in decision making , 2017, Neural Computing and Applications.

[45]  Mehrdad Heydarzadeh,et al.  A model-based signal processing method for fault diagnosis in PMSM machine , 2017, 2017 IEEE Energy Conversion Congress and Exposition (ECCE).

[46]  H. Pourghasemi,et al.  Landslide susceptibility mapping by binary logistic regression, analytical hierarchy process, and statistical index models and assessment of their performances , 2013, Natural Hazards.

[47]  Zhiming Zhang,et al.  A novel method for single-valued neutrosophic multi-criteria decision making with incomplete weight information , 2014 .

[48]  Lidia Auret,et al.  Fault diagnosis and economic performance evaluation for a simulated base metal leaching operation , 2018, Minerals Engineering.

[49]  Chunhe Xie,et al.  Failure mode and effects analysis based on a novel fuzzy evidential method , 2017, Appl. Soft Comput..

[50]  Surapati Pramanik,et al.  TOPSIS method for multi-attribute group decision-making under single-valued neutrosophic environment , 2014, Neural Computing and Applications.