Beam-tracing model for predicting sound fields in rooms with multilayer bounding surfaces

This paper presents the development of a wave-based room-prediction model for predicting steady-state sound fields in empty rooms with specularly reflecting, multilayer surfaces. A triangular beam-tracing model with phase, and a transfer-matrix approach to model the surfaces, were involved. Room surfaces were modeled as multilayers of fluid, solid, or porous materials. Biot theory was used in the transfer-matrix formulation of the porous layer. The new model consisted of the transfer-matrix model integrated into the beam-tracing algorithm. The transfer-matrix model was validated by comparing predictions with those by theory, and with experiment. The test surfaces were a glass plate, double drywall panels, double steel panels, a carpeted floor, and a suspended-acoustical ceiling. The beam-tracing model was validated in the cases of three idealized room configurations—a small office, a corridor, and a small industrial workroom—with simple boundary conditions. The number of beams, the reflection order, and t...

[1]  B. Brouard,et al.  A general method of modelling sound propagation in layered media , 1995 .

[2]  Bengt-Inge Dalenbäck.  Room acoustic prediction based on a unified treatment of diffuse and specular reflection , 1996 .

[3]  Graham Naylor,et al.  ODEON—Another hybrid room acoustical model , 1993 .

[4]  K. Attenborough.  Acoustical characteristics of rigid fibrous absorbents and granular materials , 1983 .

[5]  Murray Hodgson.  When is diffuse-field theory applicable? , 1996 .

[6]  M. Biot.  Theory of Propagation of Elastic Waves in a Fluid‐Saturated Porous Solid. I. Low‐Frequency Range , 1956 .

[7]  M. Vorländer.  Simulation of the transient and steady‐state sound propagation in rooms using a new combined ray‐tracing/image‐source algorithm , 1989 .

[8]  A. Craggs,et al.  ON FURTHER VALIDATION AND USE OF THE FINITE ELEMENT METHOD TO ROOM ACOUSTICS , 1995 .

[9]  Keith Attenborough,et al.  Acoustical characteristics of porous materials , 1982 .

[10]  Jont B. Allen,et al.  Image method for efficiently simulating small‐room acoustics , 1976 .

[11]  Frank Fahy,et al.  Acoustic Coupling between Structures and Enclosed Volumes of Fluid , 2007 .

[12]  Murray Hodgson,et al.  Improved algorithms and methods for room sound-field prediction by acoustical radiosity in arbitrary polyhedral rooms. , 2004, The Journal of the Acoustical Society of America.

[13]  E. N. Bazley,et al.  Acoustical properties of fibrous absorbent materials , 1970 .

[14]  Denis Lafarge,et al.  Spatial Fourier‐transform method for measuring reflection coefficients at oblique incidence. II. Experimental results , 1995 .

[15]  Joel Koplik,et al.  Theory of dynamic permeability and tortuosity in fluid-saturated porous media , 1987, Journal of Fluid Mechanics.

[16]  T. Lewers,et al.  A combined beam tracing and radiatn exchange computer model of room acoustics , 1993 .

[17]  J. Borish.  Extension of the image model to arbitrary polyhedra , 1984 .

[18]  Drumm,et al.  The adaptive beam-tracing algorithm , 2000, The Journal of the Acoustical Society of America.

[19]  M. Hodgson.  On the prediction of sound fields in large empty rooms , 1988 .

[20]  Jacques Martin,et al.  The prediction of echograms and impulse responses within the Epidaure software , 1993 .

[21]  C. D. Loggins,et al.  Transmission and reflection of ultrasonic waves in layered media , 1977 .

[22]  Raymond Panneton,et al.  Numerical prediction of sound transmission through finite multilayer systems with poroelastic materials , 1996 .

[23]  Thomas Funkhouser,et al.  A beam tracing method for interactive architectural acoustics. , 2004, The Journal of the Acoustical Society of America.

[24]  A. Kulowski.  Algorithmic representation of the ray tracing technique , 1985 .