Design and implementation of Alamouti encoder for 4G wireless system

Multiple-input multiple-output (MIMO) systems are called to play a crucial role in fourth Generation (4G) wireless systems to provide advanced data services. This paper addresses the design and implementation of a MIMO encoder that is based on Alamouti scheme on a Xilinx® Virtex™−4 XC4VLX60 Field Programmable Gate Arrays (FPGA) device. This encoder is a part of MIMO testbed, equipped with multiple antennas at both ends of the link which appropriately encodes the modulated symbols to achieve both time and spatial diversity. In this paper, a comprehensive explanation of the complete design process is provided, including an illustration of the tools used in its development. The encoder for the MIMO testbed is developed based on modular design which simplifies system design, eases hardware update and facilitates testing the various modules in an independent manner.

[1]  Helmut Bölcskei,et al.  An overview of MIMO communications - a key to gigabit wireless , 2004, Proceedings of the IEEE.

[2]  Erik G. Larsson,et al.  Space-Time Block Coding for Wireless Communications , 2003 .

[3]  Carl Ebeling,et al.  Implementing an OFDM Receiver on the RaPiD Reconfigurable Architecture , 2004, IEEE Trans. Computers.

[4]  Carl Ebeling,et al.  Implementing an OFDM receiver on the RaPiD reconfigurable architecture , 2003, IEEE Transactions on Computers.

[5]  Ian Vince McLoughlin,et al.  An FPGA-Based MIMO and Space-Time Processing Platform , 2006, EURASIP J. Adv. Signal Process..

[6]  Gregory D. Durgin,et al.  Space-Time Wireless Channels , 2002 .

[7]  I.V. McLoughlin,et al.  FPGA implementation of space-time block coding systems , 2004, Proceedings of the IEEE 6th Circuits and Systems Symposium on Emerging Technologies: Frontiers of Mobile and Wireless Communication (IEEE Cat. No.04EX710).

[8]  Gang Li,et al.  Beyond 3G Evolution , 2008, IEEE Vehicular Technology Magazine.

[9]  A. Robert Calderbank,et al.  Space-Time block codes from orthogonal designs , 1999, IEEE Trans. Inf. Theory.

[10]  Angel Fernandez Herrero,et al.  Design and Implementation of a Hardware Module for MIMO Decoding in a 4G Wireless Receiver , 2008, VLSI Design.

[11]  Babak Daneshrad,et al.  Multi-antenna testbeds for research and education in wireless communications , 2004, IEEE Communications Magazine.

[12]  Siavash M. Alamouti,et al.  A simple transmit diversity technique for wireless communications , 1998, IEEE J. Sel. Areas Commun..

[13]  Theodore S. Rappaport,et al.  Wireless communications - principles and practice , 1996 .

[14]  André Bourdoux,et al.  Implementation Aspects and Testbeds for MIMO Systems , 2006, EURASIP J. Adv. Signal Process..

[15]  Y. Nagao,et al.  Design of 600Mbps 4×2 MIMO-OFDM Wireless LAN System and Its FPGA Implementation , 2008, 2008 10th International Conference on Advanced Communication Technology.