Fully Screen-Printed PI/PEG Blends Enabled Patternable Electrodes for Scalable Manufacturing of Skin-Conformal, Stretchable, Wearable Electronics.

Recent advances in soft materials and nano-microfabrication have enabled the development of flexible wearable electronics. At the same time, printing technologies have been demonstrated to be efficient and compatible with polymeric materials for manufacturing wearable electronics. However, wearable device manufacturing still counts on a costly, complex, multistep, and error-prone cleanroom process. Here, we present fully screen-printable, skin-conformal electrodes for low-cost and scalable manufacturing of wearable electronics. The screen printing of the polyimide (PI) layer enables facile, low-cost, scalable, high-throughput manufacturing. PI mixed with poly(ethylene glycol) exhibits a shear-thinning behavior, significantly improving the printability of PI. The premixed Ag/AgCl ink is then used for conductive layer printing. The serpentine pattern of the screen-printed electrode accommodates natural deformation under stretching (30%) and bending conditions (180°), which are verified by computational and experimental studies. Real-time wireless electrocardiogram monitoring is also successfully demonstrated using the printed electrodes with a flexible printed circuit. The algorithm developed in this study can calculate accurate heart rates, respiratory rates, and heart rate variability metrics for arrhythmia detection.

[1]  J. Millet,et al.  A new method for manufacturing dry electrodes on textiles. Validation for wearable ECG monitoring , 2022, Electrochemistry Communications.

[2]  Cherie R. Kagan,et al.  Ink-Lithography for Property Engineering and Patterning of Nanocrystal Thin Films. , 2021, ACS nano.

[3]  A. Schander,et al.  An Assessment of Surface Treatments for Adhesion of Polyimide Thin Films , 2021, Polymers.

[4]  G. Malliaras,et al.  Conducting Polymer‐Ionic Liquid Electrode Arrays for High‐Density Surface Electromyography , 2021, Advanced healthcare materials.

[5]  Viviana Betti,et al.  Inkjet-printed fully customizable and low-cost electrodes matrix for gesture recognition , 2021, Scientific Reports.

[6]  M. S. Sarto,et al.  Production and characterization of Graphene Nanoplatelet-based ink for smart textile strain sensors via screen printing technique , 2021 .

[7]  Lieva Van Langenhove,et al.  Development of Washable Silver Printed Textile Electrodes for Long-Term ECG Monitoring , 2020, Sensors.

[8]  Jeongmoon J. Choi,et al.  All-printed nanomembrane wireless bioelectronics using a biocompatible solderable graphene for multimodal human-machine interfaces , 2020, Nature Communications.

[9]  Shinjae Kwon,et al.  Fully Integrated, Stretchable, Wireless Skin‐Conformal Bioelectronics for Continuous Stress Monitoring in Daily Life , 2020, Advanced science.

[10]  Shinjae Kwon,et al.  Soft Nanomembrane Sensors and Flexible Hybrid Bioelectronics for Wireless Quantification of Blepharospasm , 2020, IEEE Transactions on Biomedical Engineering.

[11]  Xiaojun Guo,et al.  Screen printed graphene electrodes on textile for wearable electrocardiogram monitoring , 2019, Applied Physics A.

[12]  W. Yeo,et al.  Fully Printed, Wireless, Stretchable Implantable Biosystem toward Batteryless, Real‐Time Monitoring of Cerebral Aneurysm Hemodynamics , 2019, Advanced science.

[13]  Woon-Hong Yeo,et al.  All‐in‐One, Wireless, Stretchable Hybrid Electronics for Smart, Connected, and Ambulatory Physiological Monitoring , 2019, Advanced science.

[14]  Hyuk‐Jun Kwon,et al.  Laser-Processed Nature-Inspired Deformable Structures for Breathable and Reusable Electrophysiological Sensor towards Controllable Home Electronic Appliances and Psychophysiological Stress Monitoring. , 2019, ACS applied materials & interfaces.

[15]  K. Novoselov,et al.  All Inkjet-Printed Graphene-Silver Composite Ink on Textiles for Highly Conductive Wearable Electronics Applications , 2019, Scientific Reports.

[16]  Wei Guo,et al.  Matrix-Independent Highly Conductive Composites for Electrodes and Interconnects in Stretchable Electronics. , 2019, ACS applied materials & interfaces.

[17]  Cheng-Hung Lin,et al.  An electroneurography-based assay for identifying injured nerve segment during surgery: design and in vivo application in the rat , 2019, Journal of Neural Engineering.

[18]  Boris Popov,et al.  Enabling platform technology for smart fabric design and printing , 2019, Journal of Engineered Fibers and Fabrics.

[19]  Hyun-Joong Chung,et al.  Two‐Layered and Stretchable e‐Textile Patches for Wearable Healthcare Electronics , 2018, Advanced healthcare materials.

[20]  N. Willenbacher,et al.  How rheological properties affect fine-line screen printing of pastes: a combined rheological and high-speed video imaging study , 2018, Journal of Coatings Technology and Research.

[21]  Yiwei Han,et al.  Electrohydrodynamic printing of silver nanowires for flexible and stretchable electronics. , 2018, Nanoscale.

[22]  L Tian,et al.  Wearable sensors: modalities, challenges, and prospects. , 2018, Lab on a chip.

[23]  Eduardo García-Breijo,et al.  Textile Concentric Ring Electrodes for ECG Recording Based on Screen-Printing Technology , 2018, Sensors.

[24]  F. Shaffer,et al.  An Overview of Heart Rate Variability Metrics and Norms , 2017, Front. Public Health.

[25]  Yanlin Song,et al.  Inkjet printing wearable electronic devices , 2017 .

[26]  Babak Ziaie,et al.  Highly Stretchable Potentiometric pH Sensor Fabricated via Laser Carbonization and Machining of Carbon-Polyaniline Composite. , 2017, ACS applied materials & interfaces.

[27]  O. Krammer,et al.  Investigating the effect of solder paste viscosity change on the pressure during stencil printing , 2016, 2016 IEEE 22nd International Symposium for Design and Technology in Electronic Packaging (SIITME).

[28]  Caroline Nicol,et al.  Flexible Inkjet‐Printed Multielectrode Arrays for Neuromuscular Cartography , 2016, Advanced healthcare materials.

[29]  Peter Greenwood,et al.  Material and process optimization screen printing carbon graphite pastes for mass production of heating elements , 2016 .

[30]  Ka Ming Ng,et al.  High-concentration copper nanoparticles synthesis process for screen-printing conductive paste on flexible substrate , 2015, Journal of Nanoparticle Research.

[31]  James J. S. Norton,et al.  Soft, curved electrode systems capable of integration on the auricle as a persistent brain–computer interface , 2015, Proceedings of the National Academy of Sciences.

[32]  Steve Beeby,et al.  Novel active electrodes for ECG monitoring on woven textiles fabricated by screen and stencil printing , 2015 .

[33]  Moongee Cho,et al.  Fabric-based stretchable electronics with mechanically optimized designs and prestrained composite substrates , 2014 .

[34]  Jung Woo Lee,et al.  Rugged and breathable forms of stretchable electronics with adherent composite substrates for transcutaneous monitoring , 2014, Nature Communications.

[35]  B. Jańczuk,et al.  Surface Tension of Polytetrafluoroethylene and Polymethyl Methacrylate under the Influence of the Fluorocarbon Surfactant Film , 2012 .

[36]  Jyh-Yeong Chang,et al.  Gaming control using a wearable and wireless EEG-based brain-computer interface device with novel dry foam-based sensors , 2012, Journal of NeuroEngineering and Rehabilitation.

[37]  R. Hicks,et al.  Surface Activation of Poly(methyl methacrylate) via Remote Atmospheric Pressure Plasma , 2010 .

[38]  Rebekah Drezek,et al.  Forming biocompatible and nonaggregated nanocrystals in water using amphiphilic polymers. , 2007, Journal of the American Chemical Society.

[39]  P. Addison,et al.  Heart rate variability measurements and the prediction of ventricular arrhythmias. , 2005, QJM : monthly journal of the Association of Physicians.

[40]  Yang Wang,et al.  Effect of surface energies on screen printing resolution , 1996 .