Embedded top-coat for reducing the effect out of band radiation in EUV lithography

Out of band (OOB) radiation from the EUV source has significant implications for the performance of EUVL photoresists. Here we introduce a surface-active polymer additive, capable of partitioning to the top of the resist film during casting and annealing, to protect the underlying photoresist from OOB radiation. Copolymers were prepared using reversible addition-fragmentation chain transfer (RAFT) polymerization, and rendered surface active by chain extension with a block of fluoro-monomer. Films were prepared from the EUV resist with added surface-active Embedded Barrier Layer (EBL), and characterized using measurements of contact angles and spectroscopic ellipsometry. Finally, the lithographic performance of the resist containing the EBL was evaluated using Electron Beam Lithography exposure

[1]  Noriaki Fujitani,et al.  New Approach for Reducing the Out of Band effect and Outgassing by Applying Top Coat Materials , 2013 .

[2]  Hh Hidde Brongersma,et al.  Surface studies of partially fluorinated polymethacrylates: a combined XPS and LEIS analysis , 2002 .

[3]  Mingxing Wang,et al.  New Anionic Photoacid Generator Bound Polymer Resists for EUV Lithography , 2007 .

[4]  Noriaki Fujitani,et al.  The novel top-coat material for RLS trade-off reduction in EUVL , 2012, Advanced Lithography.

[5]  Ameduri Bruno,et al.  Controlled Radical (Co)polymerization of Fluoromonomers , 2010 .

[6]  M. Żenkiewicz,et al.  Methods for the calculation of surface free energy of solids , 2007 .

[7]  Noriaki Fujitani,et al.  The novel solution for negative impact of out-of-band and outgassing by top coat materials in EUVL , 2013, Advanced Lithography.

[8]  Almar Postma,et al.  Advances in RAFT polymerization: the synthesis of polymers with defined end-groups , 2005 .

[9]  Theodore H. Fedynyshyn,et al.  Sensitivity of EUV resists to out-of-band radiation , 2009, Advanced Lithography.

[10]  Atsushi Takahara,et al.  Molecular Aggregation Structure and Surface Properties of Poly(fluoroalkyl acrylate) Thin Films , 2005 .

[11]  Andrew K. Whittaker,et al.  Control through monomer placement of surface properties and morphology of fluoromethacrylate copolymers , 2015 .

[12]  Rachel K. O'Reilly,et al.  End group removal and modification of RAFT polymers , 2010 .

[13]  Graeme Moad,et al.  End‐functional polymers, thiocarbonylthio group removal/transformation and reversible addition–fragmentation–chain transfer (RAFT) polymerization , 2011 .

[14]  Noriaki Fujitani,et al.  OBPL for the best solution to resist outgassing and out-of-band issues in EUVL toward 1Xnm hp , 2014, Advanced Lithography.

[15]  Makoto Shimizu,et al.  Effects of out-of-band radiation on EUV resist performance , 2012, Advanced Lithography.

[16]  C. Ober,et al.  Recent progress in high resolution lithography , 2006 .